WL-D82 DTU

WL-D82 DTU

WL-D82 DTU

Product catalog summary
Overview
The D82 data terminal is a rugged, serial to IP M2M cellular terminal, also known as a Data Transfer Unit (DTU). It supports two serial ports (RS-232/RS-485) and is equipped with PPP, TCP/IP, and DDP protocols. The terminal converts serial data into IP data and transmits it over 4G LTE/3G/GPRS networks, facilitating easy integration into M2M applications. Its robust design makes it suitable for various industries, including power SCADA, oil fields, and environmental protection.

Features
- Optimized EMC design
- Two serial ports (RS-232/RS-485)
- Supports PPP, TCP/IP, and UDP/IP protocols
- Industrial pluggable terminal block
- M2M 4G/3G/EDGE/GPRS cellular module
- Supports APN and VPDN wireless private networks
- SMS support
- Transparent data transmission
- Dynamic IP address support for data service centers
- LED status indication
- Wide voltage input range
- Smart power management
- External power on/off control
- Reliable and easy to deploy

Enhanced Features
- Multiple operation modes, including always online and offline when idle
- GPRS/CDMA 1x channel and SMS mutual backup
- Supports up to 2 data service centers with main/backup configurations
- Flexible data communications with TCP/IP, UDP/IP, SMS, and AT support
- Remote management and configuration via various methods

Specifications
- Voltage: DC +7.5~32V
- Consumption: Transfer mode 80mA/12V, Idle mode 7mA/12V
- Antenna: SMA-K(Female), 50ohm
- SIM interface: Standard SIM/R-UIM, 1.8/3V micro-SIM
- Dimensions: 72.2mm x 64mm x 25.5mm
- Weight: 150g
- Operating temperature: -30~+75℃
- Storage temperature: -40~+85℃
- Humidity: <95% non-condensing
- Guarantee: Two years

Cellular Specifications
- GSM/GPRS Protocol, 3GPP version 4
- Optional networks: 4G LTE, 3G HSDPA, 2G EDGE/GPRS
- Output power and sensitivity details for various bands

Ordering Information
The document provides a comparison of different models (D80, D82, D83) with details on network interfaces, power consumption, and dimensions. For further assistance, contact Wlink sales or distributors.

Contact Information
Shenzhen Wlink Technology Co., Limited
Address: 2A, F5 Building, TCL International e-city, Zhongshanyuan Rd, Nanshan, Shenzhen, China
Web: www.wlink-tech.com
Tel: 86-755-86089513
Email: [email protected]
See more

Catalog excerpts

WL-D82 DTU-1

WL-D82DTU WL-D80DTU OVER VIEW The rugged D82 data terminal is the two serial port supported serial to IP M2M cellular terminal, called DTU (Data Transfer Unit) as well. It provides two Rs232/Rs485, 2xDI, 2xDO interface and is equipped with PPP, TCP/IP and DDP protocol, it could convert the user serial data into IP data and then transmits the data to the customer's data service center through complete transparent data channel over 4G LTE/3G/GPRS mobile network, allows a simple and rapid integration of cellular network connectivity into M2M application. With the robust, reliable, long life and compact metal case design, the D82 terminal ideally adapts to onboard standard, easy to deploy and maintain, it has been widely applied in many elds worldwide, such as power SCADA, oil eld, coal mine, weather forecast, environment protection, water conservancy, heating, natural gas, petroleum and so on

 Open the catalog to page 1
WL-D82 DTU-2

► Support PPP, TCP/IP and UDP/IP protocol 1^ Industrial pluggable terminal block (► Support APN and VPDN wireless private network ► Support short message service (SMS) ► Support transparent data transmission ► Support data service center with dynamic IP address ► Support LED status indication ► Wide range voltage input !► Smart power management External power on/off control >► Reliable, flexible and easy to deploy Multiple operation model • Always online: automatically attaches Mobile network when powered on,automaticaly re-dials when off line and keep line alive • Offline when idle and trigged...

 Open the catalog to page 2
WL-D82 DTU-3

!► Power SCADA Coal mine !► Environment protection !► Heating, natural gas SPECIFICATIONS Cellular GSM/GPRS Protocol, 3GPP version 4 Optional Network: 4G LTE, 3G HSDPA, 2G EDGE/GPRS Output Power Class3 (23dBm±2dB) For LTE FDD/TDD, Class 3 24dBm + 1/3dB for WCDMA Class E2 (27dBm±3dB) for EDGE 850/900MHz Class E2 (26dBm + 3/-4dB) for EDGE 1800/1900MHz Sensitivity: WCDMA B 1/2/4: -110dBm, WCDMA B5: -110.5dBm Protocol: PPP, TCP, UDP, Ping Consumption Voltage: DC +7.5~32V (standard 12V/1A power adapter) Consumption Transfer mode: 80mA/12v (Average), Idle mode: 7mA/12 V (Max) Interface Antenna: SMA-K(Female),...

 Open the catalog to page 3
WL-D82 DTU-4

Part Number The above list includes partial of WLINK models only, please consult WLINK sales person or distributor if can't find a suitable model from the above list. D8X DATA TERMINAL COMPARISION ►D80 4G/3G/GPRS D82 T ransfer mode: 80mA/12v (Average) D83 T ransfer mode: 65mA/12v 1x RS-232/485/TTL (Average) (DB9 type) Idle mode: 15mA/12V Transfer mode: 70mA/12v 1x RS-232/485/TTL (Average) (DB9 type) Idle mode: 15mA/12V Shenzhen Wlink Technology Co., Limited Add: 2A, F5 Building, TCL International e-city, Zhongshanyuan Rd, Nanshan, Shenzhen, China Web: www.wlink-tech.com Tel: 86-755-86089513 Email:...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.