Catalogs >
Shenzhen WANCE Testing Machine Co., Ltd. >
Drop impact tester 100000J

Drop impact tester 100000J
1 / 6Pages

Catalog excerpts

Do Our Best for Your Test Drop Weight Impact | DIT-C I 30000J~IOOOOOJ This type of machine is especially designed for drop-weight tear tests of ferritic steels

Open the catalog to page 1

Drop Weight Impact | DIT-C I 30OOOJ~IOOOOOJ 1. SIMENS PLC controls and touch screen provide high reliability and versatility. 2. Automatic specimen feeding and automatic positing 3. Frame structure is made of solid steel plate with high stability under impact 4. Striker is made of high strength steel plate with high impact resistance 5. Use chain to lift striker with high precision in height 6. Self-lock design for striker clamping 7. Full-closed safety shield 8. Special design tools for support change This machine is constructed by main frame, striker, striker lifting system, striker...

Open the catalog to page 2

It is specially design and will automatically lock after clamping the striker. This device won't open caused by gravity even when the power is off. It is equipped with approach switch to detect the position. If striker is not clamped, crosshead won't move. It uses AC electromagnet for release of striker, no need of air supply, easy to pecimen feeding device Use motor to feed specimen within 5 seconds, fast, reliable and easy to operate. The frame is one body machined, without welding, with high strength. The frame tightly fits to the support, reducing the force on motor and extending the...

Open the catalog to page 3

Drop Weight Impact | DIT-C I 30OOOJ~IOOOOOJ Minimum energy(J) Weight mass Weight mass accuracy Drop height(mm) Height resolution Height accuracy(mm) Hardness of support anvil Alignment accuracy of center of tup nose, specimen and anvil center (mm) Support anvil span (mm) Specimen dimension (mm) (length x width x Frame dimension (mm) (length x width x Power requirements

Open the catalog to page 4

Drop Weight Impact | DIT-C I 30OOOJ~IOOOOOJ 1. Fully automatic specimen feeding system This system can do all the jobs, sending the samples to cold temperature chamber, fetching the samples from the cold temperature chamber, sending the samples to the testing supporter, and collect the impacted samples out after the tests, it is fully automatic operation, which can maximally guarantee the safety of operators. Temperature range: ambient ~ -100°C Chamber space (Length x Width x deep): 690mm x380mm * 198mm Sample capacity: 8 pieces (sample rack can place 10 pieces of sample) Cooling method:...

Open the catalog to page 5

Drop Weight Impact | DIT-C I 30OOOJ~IOOOOOJ 3. DWTT specimen notching machine Description: This machine is specially designed for notch making of DWTT sample. It is driven by hydraulic system and controlled by electronics. The press knife uses hard alloy material CW6Mo5Cr4V2, with long life to use. Comply with: • ASTM E436-03<Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels> Tests on Line Pipe> Max press force: lOOOkN Notch type: V type, depth 5mm, angle 45°±2 °, Clearance between columns: 410mm Column diameter: iplOOmm Compression space hight: 230mm Loading method:...

Open the catalog to page 6