SSP3115C 1-6KW
3Pages

Catalog excerpts

SSP3111C Series Solar Power Inverter technical specification Wall Mounted Integrated Solar Power Inverter System Nominal Voltage Nominal Frequency Solar Power Input Voltage Range Frequency Range Product Snapshot: Voltage Regulation Frequency Regulation Wave Form Modified sine wave Utility battery mode 15-20ms typical(narrow range); 40ms max(wide range) Battery mode Utility Battery mode Line mode Battery >95% (battery full charged) Output Power factor: 0.9/1.0 Key Features: ■Built-in MPPT solar controller Overcharge Protection ■Pure sine wave output Charge current ■Low frequency design. ■DIP switch to set AC input voltage range and low battery trip-voltage ■Output power factor is 0.9-1 and output socket can choose LCD Display & LED Indicate Line mode ■Well accept generator’s output and auto generator start terminal Line mode 1, charger current > 3A Line mode 2, charger current ≦ 3A Off-charge mode Green flashing every 2 seconds Green solid lighting Green flashing as cycle: ■Full automatical and silent operation ■Automatically transfer between battery and line modes ■Microprocessor control guarantees high reliability ■Remote control、BTS function Overload Fault Yellow lighting Red flashing every 0.5 second ■Four-steps intelligent charging control to recharging time ■Bypass function with AVR function (optional) Battery Mode ■The charging current is big up to 85 Amp, can adjust through front panel ■AC/solar output priority optional PV Optimal Work Voltage Full protection: Protection for low battery voltage、over load、output short circuit and over- temperature, Restrain surge interference、eliminate noise、protection for thunder striking，provide the reliable power to the household appliances. Environment Temperature Storage Temperature Supply the reliable long back up time power for the household appliances office appliances and solar power systems etc. STANDARD: Conform to GB/IEC regulation：EMC:GB7260.2/IEC62040-2 Note: Product specifications are subject to change without further notice. ■Charging mode priorities optional ■Battery type can choose through front p

Open the catalog to page 1

SSP3115C Series Wall Mounted Integrated Solar Power Inverter technical specification MODEL Input Wave form Nominal Voltage Low voltage trip Low voltage reengage High voltage trip High voltage reengage Nominal input frequency Frequency range Output Wave form Over-Load Protection Short circuit Protection Efficiency on line transfer mode Line transfer time Bypass without battery connected Inverter output Output wave form Output continuos power watts Output continuos power VA Power factor Nominal Output Voltage rms Output Voltage regulation Output frequency Short circuit protection Inverter...

Open the catalog to page 2

STANDARD: Conform to GB/IEC regulation : EMC:GB7260.2/IEC62040-2 GB/17626.2~5/IEC61000-4-2~5 SAFETY:GB4943 Note: Product specifications are subject to change without further notice. XHOlEC* Power Solution* Expert ^

Open the catalog to page 3

SSP3115C 1-6KW 3Pages

Catalog excerpts

All Shenzhen SORO Electronics Co. catalogs and technical brochures

SSP3115C 1-6KW
3Pages