*mydirectindustry

Catalogs
shenzhen SORO Electronics Co.,Ltd
Pure Sine Wave Inverter IG3116C

Pure Sine Wave Inverter IG3116C

Product catalog summary

Overview: The document provides technical specifications and features of the IG3116C Series Telecom Special Power Inverter, designed for high reliability and efficiency in telecom networks and personal computers.

Key Features:

Pure sine wave output ensures waveform stability and eliminates power grid interference.
Isolation transformer for stable and secure output voltage.
Uninterrupted AC bypass switching.
Comprehensive protection features including input reverse polarity, under-voltage, over-voltage, output overload, short circuit, and overheating protection.

Product Specifications:

Model range: 0.5-5KVA with nominal voltages of 110/120/220/230/240VAC.
Output power factor: 0.8 with a nominal frequency of 50/60Hz.
DC Input: Available in 48VDC, 110VDC, and 220VDC with an operating range of -18% to +25%.
AC Input: Voltage range of -25% to +20% and frequency range of ±10%.
AC Output: Pure sine wave with a power factor of 0.8, voltage variation max ±2%, and output frequency of 50/60Hz ±0.1%.
Efficiency: Maximum 92% with overload capabilities of 150% for 1 minute and 125% for 10 minutes.
Transfer time: 4ms with a dynamic response time of less than 30ms.

Standards and Safety:

Conforms to safety standard EN60950-1 and emission standard EN55022.
Operating temperature range: -10 to 50°C, storage temperature range: -40 to 85°C.
Isolation: AC-DC, DC-ground, and AC-ground at 2000Vrms.

Display and Communication:

LCD display for working mode, fault, and all parameters (current, voltage, etc.).
Communication interfaces include RS485 or RS232 and 3xDry contact.

Mechanical Specifications:

Enclosure: IP20 with 19" mounting.
Weight varies from 5kg to 13.5kg depending on the model.
Dimensions vary by model, with the smallest being 436 x 44 x 255mm and the largest 436 x 88 x 330mm.

Compliance: The product complies with GB/IEC regulations, including EMC and safety standards.

Note: Product specifications are subject to change without notice.

Catalog excerpts

IG3116C Series Telecom Special Power Inverter UPS Power Solutions Expert IG3116C Series Technical Specifications MODEL IG3116C 500VA-5000VA pure sine wave inverter 500VA DC Input Nominal Voltage Operating range AC Input Personal Computers Voltage range Frequency range AC Output Wave form Pure sine wave Power factor Norminal output voltage Voltage variation Output frequency < 3% liner load <5% non-liner load Crest factor Transfer time Dynamic response time Standard Safety Safety & Enviroment Operating Temperature Product Snapshot: Storage Temperature Isolation Display & Communication Working mode ; Fault ; All parameter (current, voltage etc.) Communication Interface Output power factor: 0.8 ■Pure sine wave output, waveform stability of pure, eliminating interference from the power grid ■Output adopt isolation transformer, output voltage stability and security ■AC bypass uninterrupted switching ■ Input reverse polarity protection, input under-voltage protection, input over-voltage protection, output STANDARD: Conform to GB/IEC regulation：EMC:GB7260.2/IEC62040-2 Note: Product specifications are subject to change without further notice. overload protection, output short circuit protection, overheating protection ■High reliability and high efficiency

Open the catalog to page 1

Open the catalog to page 2

All Shenzhen SORO Electronics Co.,Ltd catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list