• Intelligent Maximum Power Point Tracking (MPPT) technology enhances efficiency by 25% to 30%.
• Compatible with photovoltaic (PV) systems operating at 12V, 24V, or 48V.
• Three-stage charging process optimizes battery performance.
• Supports a maximum charging current of up to 60A.
• Achieves a maximum efficiency of up to 98%.
• Includes a Battery Temperature Sensor (BTS) for automatic temperature compensation.
• Supports a wide range of lead-acid batteries, including wet, AGM, and gel types.
• Features a multifunction LCD for detailed information display.

The solar charge controller is primarily used in solar power stations, home solar power systems, solar street light control systems, mobile solar power systems, and DC wind solar generating systems. It ensures maximum performance from solar arrays under all weather conditions and is compatible with four different battery types: sealed lead acid, vented, gel, and NiCd.

• MPPT Range at Operating Voltage: Conforms to GB/IEC regulations.
• Environmental Conditions: Operates in humidity from 0% to 100% RH (non-condensing) and temperatures from -20°C to 55°C. Storage temperature ranges from -40°C to 75°C.
• Maximum PV Array Open Circuit Voltage: 145VDC.
• Maximum PV Array Power: 800W.
• Maximum Input Current: 50A.
• Nominal Battery Voltage: 24VDC.
• Connected Battery Types: Sealed lead acid, AGM, or Gel.
• Protection Features: Overload, overcharge, and polarity reversal protection with audible alarms for overloads exceeding 110%.

• LCD Panel: Displays solar power, load level, battery voltage/capacity, charging current, and fault conditions.
• LED Display: Provides status indicators for solar, charging, and load.

• Dimensions: 315 x 165 x 128 mm.
• Net Weight: 4.5 kg.
• Type of Mechanical Protection: IP 31.
• Altitude: Operates effectively up to 3000 meters.