Website:
Shenzhen Socan Technologies Co.,Ltd
Catalog excerpts
Split Core Hall effect Current Sensor SCY15C Product description Features Based on Hall effect measurement principle, open loop circuit mode. The isolation voltage between primary and secondary is greater than 3000VAC. Can be opened and closed up and down, no need to disassemble the busbar, easy to install. Comply with UL94-V0 flame retardant rating. Use automotive-specific lead connector output Performance It can measure DC, AC, pulse, and various irregular waveform currents of cable conductors under isolation conditions. Wide measurement range, fast response speed, low zero drift, low temperature drift, high accuracy and good linearity. Dynamic performance (di/dt and response time) is optimal when the busbar is fully filled with primary perforations. Strong ability to resist external electromagnetic interference (BCI, EFT, CS, CE, ESD, dv/dt, etc.). Application It can be widely used in communication power supply, UPS, photovoltaic inverter, electric vehicle drive and other products. Implementation standards GB/T 7665-2005 JB/T 7490-2007 JB/T 25480-2010 JB/T 9473-2020 SJ 20792-2000 Certification Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its products. www.szsocan.com 1
Open the catalog to page 1
High Primary Current (IPH) Low Primary Current (IPL) Saturation Current (IP) Electrical Data Item Withstand resistance RINS @500V DC Output voltage Vout RL=25KΩ TA= 25 Input power supply voltage range Vc Output internal resistance ROUT Load Resistance RL Remark 3 Ambient operating temperature TA Ambient storage temperature Ts Temperature Coefficient of Offset Voltage TCVOE Output voltage temperature coefficient TCVout Response time tD @ 0→IPN (Remark 4) Withstand voltage VD@50Hz,60s,0.1mA Weight m Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product...
Open the catalog to page 2
Notes: 1. Size error: ±0.5mm; 2. Primary aperture: φ24mm; 3. SCY15C wire shell: 2520H-05/ECI, Terminal: 2521-2/ECI; 4. The IP indication direction is the positive direction of the current; 5. Incorrect wiring may cause damage to the sensor. Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its products. www.szsocan.com 3
Open the catalog to page 3All Shenzhen Socan Technologies Co. catalogs and technical brochures
-
SCB12-5A1 Pages
