Catalog excerpts
Split Core Hall effect Current Sensor SCY13 Series Stand models: SCY13-750A, SCY13C-750A Product description Features Based on Hall effect measurement principle, open loop circuit mode. The isolation voltage between primary and secondary is greater than 3000VAC. Can be opened and closed up and down, no need to disassemble the busbar, easy to install. Comply with UL94-V0 flame retardant rating. Use automotive-specific lead connector output Performance It can measure DC, AC, pulse, and various irregular waveform currents of cable conductors under isolation conditions. Wide measurement range, fast response speed, low zero drift, low temperature drift, high accuracy and good linearity. Dynamic performance (di/dt and response time) is optimal when the busbar is fully filled with primary perforations. Strong ability to resist external electromagnetic interference (BCI, EFT, CS, CE, ESD, dv/dt, etc.). Application It can be widely used in communication power supply, UPS, photovoltaic inverter, electric vehicle drive and other products. Implementation standards GB/T 7665-2005 JB/T 7490-2007 JB/T 25480-2010 JB/T 9473-2020 SJ 20792-2000 Certification Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its products. www.szsocan.com 1
Open the catalog to page 1Technical Parameters of SCY13-750A Model Primary Current (A)IPN Primary Current Max. Peak Value (A) IPM Output voltage (V) Vout @±IPN,RL=25KΩ Electrical Data Item Input power supply voltage range Vc Withstand resistance RINS @500V DC Output voltage Vout @IPN Output internal resistance ROUT Load Resistance RL Remark 3 Ambient operating temperature TA Ambient storage temperature Ts Response time tD @ 0→IPN (Remark 4) Withstand voltage VD@50Hz,60s,0.1mA Weight m Temperature Coefficient of Offset Voltage TCVOE Output voltage temperature coefficient Shenzhen SoCan Technologies Co.,Ltd SoCan is...
Open the catalog to page 2Concentrate: 1. Size error: ±0.5mm; 2. Primary aperture: φ24mm; 3. SCY13 wire rubber shell: 04T-JWPT-VSLE-S/JST, Terminal: SWPT-001T-P025/JST; 4.The IP indication direction is the positive direction of the current; 5. Incorrect wiring may cause damage to the sensor. Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its products. www.szsocan.com 3
Open the catalog to page 3Technical Parameters of SCY13C Model Primary Current (A)IPN Primary Current Max. Peak Value (A) IPM Output Voltage (V) Vout @±IPN,RL=25KΩ Electrical Data Item Input power supply voltage range Vc Withstand resistance RINS @500V DC Output voltage Vout @IPN Output internal resistance ROUT Load Resistance RL Remark 3 Ambient operating temperature TA Ambient storage temperature Ts Response time tD @ 0→IPN (Remark 4) Withstand voltage VD@50Hz,60s,0.1mA Weight m Temperature Coefficient of Offset Voltage TCVOE Output voltage temperature coefficient Shenzhen SoCan Technologies Co.,Ltd SoCan is...
Open the catalog to page 4Notes: 1. Size error: ±0.5mm; 2. Primary aperture: φ24mm; 3. SCY13C wire shell: 04T-JWPT-VSLE-S/JST, Terminal: SWPT-001T-P025/JST; 4. The IP indication direction is the positive direction of the current; 5. Incorrect wiring may cause damage to the sensor. More notes: We are supplying standard model SCY13-750A and SCY13C-750A of each series, if the other model rather than standard model is more suitable for you, please contact us directly. Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its...
Open the catalog to page 5All Shenzhen Socan Technologies Co. catalogs and technical brochures
-
SCB12-5A
1 Pages