SCY10 Series Split core hall effect current sensor 300A..2000A

Product catalog summary

Product Description
The Split Core Hall Effect Current Sensor SCY10 by Shenzhen SoCan Technologies is designed based on the Hall effect measurement principle and operates in an open loop circuit mode. It features an isolation voltage greater than 3000VAC between primary and secondary circuits and is easy to install without disassembling the busbar. The product complies with the UL94-V0 flame retardant rating.

Performance
The sensor can measure DC, AC, pulse, and various irregular waveform currents under isolation conditions. It offers a wide measurement range, fast response speed, low zero and temperature drift, high accuracy, and good linearity. Optimal dynamic performance is achieved when the busbar is fully filled with primary perforations. It also has strong resistance to external electromagnetic interference.

Applications
The SCY10 sensor is suitable for use in communication power supplies, UPS systems, photovoltaic inverters, electric vehicle drives, and other products.

Implementation Standards
The product adheres to several standards, including GB/T 7665-2005, JB/T 7490-2007, JB/T 25480-2010, JB/T 9473-2020, and SJ 20792-2000.

Technical Parameters

Input power supply voltage range: ±11 to ±18 VDC
Current consumption: up to ±20 mA
Withstand resistance: 1000 MΩ at 500V DC
Output voltage: Vout = OE + (IPN/RL) * 4.4
Accuracy: ±1%
Linearity: ±1% IPN
Offset voltage: ±20 to ±25 mV
Response time: 3 to 5 µs
Operating temperature: -40 to 125°C
Storage temperature: -40 to 125°C
Withstand voltage: 3000 VAC
Weight: 1280 g

Model Parameters
The SCY10 model is available in various configurations with primary current ratings ranging from 800A to 3000A, with a maximum peak value of ±4000A for higher models. The output voltage is ±4V±1% at ±IPN.

Dimensions and Notes
The sensor has a primary aperture of 104x40mm and uses a 2EDGVC-5.08-4P output terminal. Incorrect wiring may damage the sensor.

Catalog excerpts

SCY10 Series Split core hall effect current sensor 300A..2000A-1

Split Core Hall effect Current Sensor SCY10 Product description Features Based on Hall effect measurement principle, open loop circuit mode. The isolation voltage between primary and secondary is greater than 3000VAC. Can be opened and closed up and down, no need to disassemble the busbar, easy to install. Comply with UL94-V0 flame retardant rating. Performance It can measure DC, AC, pulse, and various irregular waveform currents of cable conductors under isolation conditions. Wide measurement range, fast response speed, low zero drift, low temperature drift, high accuracy and good linearity. Dynamic performance (di/dt and response time) is optimal when the busbar is fully filled with primary perforations. Strong ability to resist external electromagnetic interference (BCI, EFT, CS, CE, ESD, dv/dt, etc.). Application It can be widely used in communication power supply, UPS, photovoltaic inverter, electric vehicle drive and other products. Implementation standards GB/T 7665-2005 JB/T 7490-2007 JB/T 25480-2010 JB/T 9473-2020 SJ 20792-2000 Certification Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its products. www.szsocan.com 1

Open the catalog to page 1

SCY10 Series Split core hall effect current sensor 300A..2000A-2

Technical Parameters Model Primary Current (A)IPN Primary Current Max. Peak Value (A) IPM Output voltage (V) Vout @±IPN，RL=10KΩ Electrical Data Item Input power supply voltage range Vc Withstand resistance RINS @500V DC Output voltage Vout @IPN Output internal resistance ROUT Load Resistance RL Remark 3 Ambient operating temperature TA Ambient storage temperature Ts Response time tD @ 0→IPN (Remark 4) Withstand voltage VD@50Hz,60s,0.1mA Weight m Temperature Coefficient of Offset Voltage TCVOE Output voltage temperature coefficient Remarks: 1. VC is less than the minimum value, which will lead...

Open the catalog to page 2