SCK35 Series Hall effect Open Loop Current Sensor

Product catalog summary

Product Description
The SCK35 Hall Effect Current Sensor by Shenzhen SoCan Technologies Co., Ltd is designed based on the Hall effect measurement principle and operates in an open loop circuit mode. It features a high isolation voltage of over 3000VAC between primary and secondary circuits and complies with the UL94-V0 flame retardant rating. The sensor utilizes automatic adjustment technology to enhance performance.

Performance
The sensor can measure DC, AC, pulse, and various irregular waveform currents under isolation conditions. It offers a wide measurement range, fast response speed, low zero and temperature drift, high accuracy, and good linearity. Optimal dynamic performance is achieved when the busbar is fully filled with primary perforations. It also has strong resistance to external electromagnetic interference.

Applications
The SCK35 is suitable for use in inverters, UPS systems, photovoltaic inverters, electric vehicle drives, high-frequency power supplies, and inverter welding machines.

Implementation Standards
The product adheres to several standards, including GB/T 7665-2005, JB/T 7490-2007, JB/T 25480-2010, JB/T 9473-2020, and SJ 20792-2000.

Technical Parameters
The sensor is available in various models with primary current ratings ranging from 300A to 2000A. It has a maximum peak current value of up to ±3000A and an output voltage of ±4V±1%. The input power supply voltage range is ±11V to ±18V DC, with a current consumption of up to 20mA. The sensor's accuracy is ±1% at 25°C, with a linearity of ±0.5% IPN. It operates within an ambient temperature range of -40°C to 125°C and has a withstand voltage of 3000VAC.

Dimensions and Notes
The SCK35 sensor has specific dimensions and features, including a primary aperture size of 41.5mm x 17.5mm and fastening holes of φ4.5mm. The output terminals vary between models, with specific connectors for each. The primary conductor's temperature should not exceed 105°C, and incorrect wiring may damage the sensor.

Catalog excerpts

SCK35 Series Hall effect Open Loop Current Sensor-1

Hall effect Current Sensor SCK35 Product description Features Based on Hall effect measurement principle, open loop circuit mode. The isolation voltage between primary and secondary is greater than 3000VAC. Comply with UL94-V0 flame retardant rating. Using automatic adjustment technology, product performance is better. Performance It can measure DC, AC, pulse, and various irregular waveform currents of cable conductors under isolation conditions. Wide measurement range, fast response speed, low zero drift, low temperature drift, high accuracy and good linearity. Dynamic performance (di/dt and response time) is optimal when the busbar is fully filled with primary perforations. Strong ability to resist external electromagnetic interference (BCI, EFT, CS, CE, ESD, dv/dt, etc.). Application It can be widely used in inverters, UPS, photovoltaic inverters, electric vehicle drives, high-frequency power supplies, inverter welding machines and other products. Implementation standards GB/T 7665-2005 JB/T 7490-2007 JB/T 25480-2010 JB/T 9473-2020 SJ 20792-2000 Certification Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its products. m oc . na c os z s. w w w 1

Open the catalog to page 1

SCK35 Series Hall effect Open Loop Current Sensor-2

Technical Parameters Model Primary Current (A)IPN Primary Current Max. Peak Value (A) IPM ±900A ±1500A ±1800A ±2400A ±3000A ±3000A ±3000A Output voltage (V) Vout @±IPN， RL=10KΩ Electrical Data Item Output internal resistance ROUT Load Resistance RL Remark 3 Ambient operating temperature TA Ambient storage temperature Ts Input power supply voltage range Vc Current consumption Ic Withstand resistance RINS @500V DC Output voltage Vout @IPN Temperature Coefficient of Offset Voltage TCVOE Output voltage temperature coefficient TCVout Remarks: 1. VC is less than the minimum value, which will lead to...

Open the catalog to page 2

SCK35 Series Hall effect Open Loop Current Sensor-3

Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its products. m oc . na c os z s. w w w 3

Open the catalog to page 3

SCK35 Series Hall effect Open Loop Current Sensor-4

Notes: 1. Size error: ±1mm; 2. Primary aperture: □ 41.5*17.5mm; 3. Fastening hole: φ4.5mm*2; 4. SCK35 output terminal: Molex 5045-04AG; SCK35T output terminal: 2EDGVC-5.08-4P SCK35T mating plug: 2EDGK-5.08-4P; 5. The IP indication direction is the positive direction of the current; 6. The temperature of the primary conductor shall not exceed 105°C; 7. Incorrect wiring may cause damage to the sensor. Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its products. m oc . na c os z s. w w w

Open the catalog to page 4