Hall Effect Open Loop Current Sensor Features: Develops on hall-effect principle, open loop technologies There is galvanic isolation between primary and secondary circuit of the sensor, it can measure DC, AC or pulse currents. Nominal input current from 300A..1500A High immunity to external interference Bipolar power supply Voltage output Technical parameters Model Parameters(25°C) Nominal Rms Current (Ipn) Load resistance Rmax Output Signal Working voltage Accuracy @ Ta=25°C Linearity @ Ta=25°C Withstand voltage Offset Voltage Offset temperature Thermal drift of Vo Response time Hysteresis offset Current consumption Operating temperature Storage temperature Instructions 1.SCK26 Series is open-loop current sensor. There is galvanic isolation between primary and secondary circuit of the sensor, it can measure DC, AC or pulse currents. 2.Features: High accuracy, low power consumption, high liability and strong overload capacity. 3. The sensor is in the form of a circular hole, which is mainly used to measure the current of the cable conductor. It is designed by automotive-grade components and is dedicated to the automotive BMS system and the motor drive system. Caution: Incorrect wiring may damage the sensor Typical Applications: Variable Frequency Drives Battery module supplies Switched Mode Power Supplies (SMPS) Uninterruptible Power Supplies (UPS) Welding machinces SoCan reserve the rights to modify its sensors without prior notice. Shenzhen SoCan Technologies Co.,Ltd Email: [email protected]