Hall Effect Close Loop Current Sensor SCB21 Series PCB Mount, window 12.5*9.0mm Technical parameters Nominal Rms Current (Ipn) Measuring Range (Ip) Road Resistance Rmax Output current Turns Ratio Measuring Resistance Working voltage Accuracy @ Ta=25°C Linearity @ Ta=25°C Offset current Offset temperature characteristics Themal drift of Vo Typical values ± 0.1mA, maximum ±0.5mA Di/Dt following accuracy Bandwidth Response time Hysteresis offset Withstand voltage Current consumption Operating temperature Storage temperature Dimension(mm) Typical values ± 0.05mA, maximum ±0.25mA >100A/us DC ~100kHz < 1uS < 0.5mA (if=F.S. 0<--- --->Nominal RMS Current) 3kVrms/50Hz/min 13mA + output current -40~+80 °C -40~+80 °C Instructions 1.SCB21 Series is close-loop current sensor. There is galvanic isolation between primary and secondary circuit provides accurate electronic measurement of DC, AC or pulse currents. 2.Square perforation, mainly measure cooper conductor current. 3.Current output. 4. Advantages: Wide bandwidth, excellent accurary, good linearity and fast response. Caution: Incorre