SCB12 Series Close loop Hall effect current sensor 5A, 50..300A

Product catalog summary

Product Description
The SCB1 Hall Effect Current Sensor by Shenzhen SoCan Technologies Co., Ltd is designed based on the Hall effect measurement principle and operates in a closed-loop circuit mode. It offers an isolation voltage greater than 3000VAC and complies with the UL94-V0 flame retardant rating.

Features

Measures DC, AC, pulse, and irregular waveform currents under isolation conditions.
Exhibits low temperature drift, zero drift, fast response time, and good linearity with accuracy up to 0.1%.
Optimal dynamic performance when the busbar is fully filled with primary perforations.
Strong resistance to external electromagnetic interference.

Applications
Suitable for use in inverters, UPS, photovoltaic inverters, electric vehicle drives, high-frequency power supplies, and inverter welding machines.

Implementation Standards

GB/T 7665-2005
JB/T 7490-2007
JB/T 25480-2010
JB/T 9473-2020
SJ 20792-2000

Technical Parameters
SCB12T Model

Primary Current: 100A to 500A
Turns Ratio: 1:1000 to 1:5000
Output Signal: ±100mA
Accuracy: ±0.5% to ±0.8%
Response Time: 1μs
Operating Temperature: -40°C to 85°C

SCB12VT/SCB12R Models

Primary Current: 100A to 500A
Output Voltage: ±5V
Accuracy: ±0.5% to ±0.8%
Response Time: 1μs
Operating Temperature: -40°C to 85°C

Special Model: SCB12-5A

Nominal RMS Current: ±5AT to ±50AT
Output Voltage: ±5V
Accuracy: ±1%
Response Time: <5μs
Operating Temperature: -25°C to 80°C

Notes

Ensure correct wiring to avoid sensor damage.
Size error margin is ±1mm.
Primary aperture is φ35mm.

Catalog excerpts

SCB12 Series Close loop Hall effect current sensor 5A, 50..300A-1

Hall effect Current Sensor SCB12T, SCB12VT, SCB1 SCB1 SCB12R Product description Features Based on Hall effect measurement principle, close loop circuit mode. The isolation voltage between primary and secondary is greater than 3000VAC. Comply with UL94-V0 flame retardant rating. V0 Performance It can measure DC, AC, pulse, and various irregular waveform currents of cable conductors under isolation conditions. t, Very low temperature drift, zero drift, fast response time, good linearity, accuracy can reach 0.1%. Dynamic performance (di/dt and response time) is optimal when the busbar is fully filled with primary perforations. Strong ability to resist external electromagnetic interference (BCI, EFT, CS, CE, ESD, dv/dt, etc.). Application It can be widely used in inverters, UPS, photovoltaic inverters, electric vehicle drives, high-frequency power supplies, inverter welding machines and other products. frequency machines Implementation standards GB/T 7665-2005 JB/T 7490-2007 JB/T 25480-2010 JB/T 9473-2020 SJ 20792-2000 Certification Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its the products. m oc . na c os z s. w w w 1

Open the catalog to page 1

SCB12 Series Close loop Hall effect current sensor 5A, 50..300A-2

Technical Parameters Model Primary Current (A)IPN Primary Current Max. Peak Value (A) IPM Secondary coil internal resistance RS @TA=70℃ Output signal ISN @IPN， Measure resistance RM @IPN,Vc=±15V, Electrical Data Item Input power supply voltage range Vc ， Ambient operating temperature TA Ambient storage temperature Ts Offset current IOE @TA= 25℃,IP=0 Magnetic offset current IOM @ IP→0 Temperature coefficient of offset current TCIOE Withstand voltage VD@50Hz,60s,0.1mA Weight m Remarks: Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality,

Open the catalog to page 2

SCB12 Series Close loop Hall effect current sensor 5A, 50..300A-3

1. VC is greater than the maximum value, which may cause permanent failure of the measurement device. 2. I OUT Wiring Reference Notes: 1. Size error: ±1mm; 2. Primary aperture: φ35mm; 3. Fastening hole: φ5.5mm*2; 4. SCB12T output terminal: 2EDGIV-5.08-4P; 5. The IP indication direction is the positive direction of the current; Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its products. m oc . na c os z s. w w w

Open the catalog to page 3

SCB12 Series Close loop Hall effect current sensor 5A, 50..300A-4

SCB12VT, SCB12R Technical Parameters Model Primary Current (A)IPN Primary Current Max. Peak Value (A) IPM Output Voltage VOUT @IPN， Electrical Data Item Input power supply voltage range Vc ， Output internal resistance ROUT Ambient operating temperature TA Ambient storage temperature Ts Offset current IOE @TA= 25℃,IP=0 Magnetic offset current IOM @ IP→0 Temperature coefficient of offset current TCIOE Withstand voltage VD@50Hz,60s,0.1mA Weight m Remarks: 1. VC is greater than the maximum value, which may cause permanent failure of the measurement Shenzhen SoCan Technologies Co.,Ltd SoCan is committed...

Open the catalog to page 4

SCB12 Series Close loop Hall effect current sensor 5A, 50..300A-5

Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its products. m oc . na c os z s. w w w 5

Open the catalog to page 5

SCB12 Series Close loop Hall effect current sensor 5A, 50..300A-6

Notes: 1. Size error: ±1mm; 2. Primary aperture: φ35mm; 3. Fastening hole: φ5.5mm*2; 4.SCB12VT output terminal: 2EDGIV-5.08-4P; SCB12R Shell: 282106-1/AMP SCB12R terminal: 282404-1/AMP SCB12R waterproof plug: 281934-1/AMP 5. The IP indication direction is the positive direction of the current; 6. Incorrect wiring may cause damage to the sensor. Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its products. m oc . na c os z s. w w w 6

Open the catalog to page 6

SCB12 Series Close loop Hall effect current sensor 5A, 50..300A-7

Special model: SCB12-5A Technical Parameters SCB12Parameters(25°C) Nominal Rms Current (Ipn) Measuring Range (Ip) Output voltage Measuring Resistance Working voltage Accuracy @ Ta=25°C Linearity @ Ta=25°C Offset Voltage Offset temperature characteristics Thermal drift of Vo Bandwidth Response time Hysteresis offset Withstand voltage Current consumption Operating temperature Storage temperature Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its products. m oc . na

Open the catalog to page 7

SCB12 Series Close loop Hall effect current sensor 5A, 50..300A-8

Notes: 1. Size error: ±1mm; 2. Primary aperture: φ35mm; 3. Fastening hole: φ5.5mm*2; 4.SCB12-5A output terminal: 2EDGIV-5.08-4P; 5. The IP indication direction is the positive direction of the current; 6. Incorrect wiring may cause damage to the sensor. Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its products. m oc . na c os z s. w w w 8

Open the catalog to page 8