Open-loop Hall effect current sensor / AC / DC, 200..500A | SCK28 series
3Pages

{{requestButtons}}

Catalog excerpts

Open-loop Hall effect current sensor / AC / DC, 200..500A | SCK28 series - 1

Hall effect Current Sensor SCK28 Product description Features Based on Hall effect measurement principle, open loop circuit mode. Single-chip programmable Hall IC, compatible with automotive-specific connectors. Working temperature −40 °C~125 °C. Easy to install, small size, does not take up space. Comply with UL94-V0 flame retardant rating Performance It can measure DC, AC, pulse, and various irregular waveform currents of cable conductors under isolation conditions. Wide measurement range, fast response speed, low zero drift, low temperature drift, high accuracy and good linearity. Dynamic performance (di/dt and response time) is optimal when the busbar is fully filled with primary perforations. Strong ability to resist external electromagnetic interference (BCI, EFT, CS, CE, ESD, dv/dt, etc.). Application It can be widely used in electric vehicle drivers, battery management and other products. Implementation standards GB/T 7665-2005 JB/T 7490-2007 JB/T 25480-2010 JB/T 9473-2020 SJ 20792-2000 Certification Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its products. m oc . na c os z s. w w

Open the catalog to page 1
Open-loop Hall effect current sensor / AC / DC, 200..500A | SCK28 series - 2

Technical Parameters Model Primary Current (A)IPN Primary Current Max. Peak Value (A) IPM Output voltage (V) Vout @±IPN,RL=10KΩ Electrical Data Item Input power supply voltage range Vc Current consumption Ic Withstand resistance RINS @500V DC Output voltage Vout @IPN Output internal resistance ROUT Load Resistance RL Remark 2 Power-on delay TPOD Ambient operating temperature TA Ambient storage temperature Ts Temperature Coefficient of Offset Voltage TCVOE Output voltage temperature coefficient Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality,...

Open the catalog to page 2
Open-loop Hall effect current sensor / AC / DC, 200..500A | SCK28 series - 3

Remarks: 1. VC is less than the minimum value, which will lead to inaccurate measurement, VC is greater than the maximum value, which may cause permanent failure of the measurement device. 2. The zero bias voltage and output voltage are linearly related to Vc, so the accuracy of Vc should be ensured as much as possible when applying. Notes: 1. Size error: ±1mm; 2. Primary aperture: □6*20mm; 3. Fastening hole: φ4.5mm; 4. Output wiring plug: AMP P/N: 1473672-1; 5. The IP indication direction is the positive direction of the current; 6. The temperature of the primary conductor shall not exceed...

Open the catalog to page 3

All Shenzhen Socan Technologies Co. catalogs and technical brochures

  1. SCB12-5A

    1 Pages