Website:
Shenzhen Socan Technologies Co.,Ltd
Catalog excerpts
DC Leakage Current Sensor SCD2 Product description Features SCD series DC leakage current sensor, using the principle of magnetic modulation closed-loop, for isolated measurement of DC milliampere small current. The isolation voltage between primary and secondary is greater than 3000VAC. Temperature compensation circuit control, zero drift, accurate measurement. Perforated input, unplugging terminals, screw fastening flat mounting. Overall size(mm):99(L)×23.5(W)×108(H); Aperture: 40mm. Comply with UL94-V0 flame retardant rating. Applications Widely used in emerging industries and fields such as electric power, industrial automation, solar photovoltaic, etc. Implementation standards： GB/T 7665-2005 JB/T 25480-2010 JB/T 11205-2011 SJ 20790-2000 Certification： Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to continuously improving product quality, and the company reserves the right to update its products.
Open the catalog to page 1
Technical Parameters Model Parameters （25℃） Primary Current IPN (DC) Primary Current Max. Peak Value IPM(DC) Output voltage Vout @±IPN，RL=10KΩ Electrical Data Item Input power supply voltage range Vc（±5%）（Remark 1） Output internal resistance ROUT Temperature coefficient of offset voltage TCVOE Current consumption Ic Withstand resistance RINS @500V DC Output voltage Vout @IPN， RL=10KΩ，TA= 25℃ Operating ambient temperature range TA Storage ambient temperature range Ts Insulation withstand voltage VD@50Hz, 60s, 0.1mA Weight m Remark： Shenzhen SoCan Technologies Co.,Ltd SoCan is committed to...
Open the catalog to page 2
If VC is less than the minimum value, the measurement will be inaccurate. If VC is greater than the maximum value, it may cause permanent failure of the measuring device. 2. When ±12V＜VCC＜±15V，will reduce the measurement range 3. VOUT = 5.05 * Notes: 1. Size error: ±1mm; 2. Primary aperture: φ40mm; 3. Fastening hole: φ6mm*2; 4. Output terminal: 2EDGVC-5.08-4P; 5. The IP indication direction is the positive direction of the current, and the OFS is the zero adjustment; 6. Incorrect wiring may cause damage to the sensor; 7. The zero voltage of the sensor can be adjusted appropriately according...
Open the catalog to page 3All Shenzhen Socan Technologies Co. catalogs and technical brochures
-
SCB12-5A1 Pages
