*mydirectindustry

Catalogs
Shenzhen Sikes Electric Co., Ltd.
sikes harmonic filter 5.5kw THDI

sikes harmonic filter 5.5kw THDI

Product catalog summary

Identification and Specifications
Model family: PHF 005, a three-phase harmonic filter designed for use with Danfoss VLT® Series drives. The filter is suitable for symmetrical loads of converters with uncontrolled B6 rectifiers. It has a rated current of 10 A and is compatible with variable frequency drives (VFD) with nominal loads of 5.5 kW. The filter can handle an overload capacity of 160% for 60 seconds once per hour. It operates efficiently with a THDi of less than 5% at nominal load and maintains an efficiency greater than 0.98.

Technical Data
The filter operates at a rated voltage of 400 V, with a voltage range of 380-415 V and a rated frequency of 50 Hz. It is designed for a three-phase system with system requirements of THVD less than 2% and line voltage unbalance less than 1%. The filter has an insulation resistance greater than 100 MΩ at 1000 VDC and a noise level below 72 dB. It is classified under insulation class H and has an IP protection class of IP 20.

Standards and Compliance
The filter complies with IEEE 519, EN 61000-2-2, EN 61000-2-4, IEC/EN 61000-3-2, IEC/EN 61000-3-4, and IEC/EN 61000-3-12 standards. It is important to observe the protection clause to ISO 16016.

Installation and Connections
The filter includes mains terminals (L1, L2, L3) for connection to the grid side and output terminals (L1', L2', L3') for connection to the VFD side. Optional connection terminals (A1, B1, C1, A2, B2, C2) are available for capacitor disconnect. A temperature switch terminal is also provided for connection to the frequency converter.

Dimensions and Mounting
The filter's weight is 21 kg, and it has a test voltage of 3.0 kV for 10 seconds. The technical specifications are subject to change and may vary due to material and production tolerances.

Catalog excerpts

产品系列号/ Model family: PHF 005 Designed for matched performance with Danfoss VLT® Series drives 专为匹配 Danfoss VLT® 系列变频器的性能而设计 / TECHNICAL DATA Rated voltage Rated frequency System requirements Rated current Overrating capacity Test voltage Insulation Class Insulation resistance THVD < 2%, line voltage unbalance < 1% (THVD<2%线电压不平衡率<1%) 5.5 Symmetrical load of a converter with uncontrolled B6 rectier.(带有6脉波整流桥的⾮线性逆变器负载) at nominal load 在满载条件下 / TECHNICAL DATA Ambient tempatemper Temperature Rise IEEE 519 EN 61000-2-2 EN 61000-2-4 IEC/EN 61000-3-2 IEC/EN 61000-3-4 IEC/EN 61000-3-12 注释 / NOTES 典型技术规格可能因材料和⽣产公差⽽有所不同。 *

Open the catalog to page 1

/ Typical performance of the lter at nominal load / Typical performance of the lter over full load range Load = DC-link power of the frequency inverter connected to the lter 负载=连接到滤波器的变频器直流母线功率 Power Factor Power Factor / Dimensions and mounting dimensions

Open the catalog to page 2

Electrical Installation Harmonic Filter PHF 005/ PHF 010 contains the following terminals PHF系列谐波滤波器 PHF 005/PHF 010 含有下列端子 Mains terminals 输⼊端连接到电源 Output terminals to the frequency converter. 输出端连接到变频器 Optional connection terminals for capacitor disconnect. 选配的旁路端⼦⽤于电容中断连接 Temperature switch connected to the frequency converter. Main supply 24V DC 24-240V AC depending on contactor type Frequency converter Capacitor diaconnect (optional)

Open the catalog to page 3

All Shenzhen Sikes Electric Co., Ltd. catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list