Split Core AC Current Transducer www.ce-transducer.com Split Core AC Current Transducer Specifications: Series Operating Isolation Principle Voltage Response Time Overloa Power ConsumptionmW d Vz,Vd,Vg,Iz Iy Output Mounting Capacity Output 20 times or <5/sec Din rail 360 450 at 500A /Screw Part Numbers: Series Power Supply Window Case Accuracy % (mm Style G: ф 31 For output Iz and Iy, load would be less than 250Ω. Contact us for above250ΩRL≤500Ω. Part Number Example: CE-IJ03-32GS4-1.0/50A Description: Spilt core single-phase AC current transducer, Output:0-5V, Power supply+12V, Aperture: Ф31mm, Case style: S4, Accuracy: 1.0, Input current:0- 50A. Connections Diagram(see page 3 for mounting dimensions) Current Output Output Power Supply Fig.1.3 CE-IJ03-xxGS4 with voltage output Power Supply Fig. 1.4 CE-IJ03-xxGS4 with current output Sense motor stalls and short circuits Industrial instrumentation Process control loops If you want to open/close the split core, press and move the orange bolt to the open/close direction. The conductor carrying the input current should pass through the center of the aperture as

perpendicularly as possible. And lock the bolt. 3. Make sure the polarities are in right connection. The output and the power supply must be common grounded. If there is a meter used to test the output of the transducer, please make sure the accuracy of the meter is higher than the transducer. 1.1 Split Core Self Power AC Current Transducer Specifications: Series Power Supply Window mm Case Style Rated Input Part Numbers: Isolation Linearity Response Overload Load Voltage Error Time Capacity CE-IJ03-30 3: 05V (Vz) 2500 20 times or ≤1% >3MΩ 1S CE-IJ03-80 8:010V(Vd) VDC <5/sec at 500A * There are...