1. Catalogs
  2. SHENZHEN SENSOR ELECTRONIC TECHNOLOGY Co., LTD.
  3. Hall Effect Analog Current Transducer

Hall Effect Analog Current Transducer

Hall Effect Analog Current Transducer
1 / 30 PagesView full catalog

Hall Effect Analog Current Transducer

Product catalog summary
General Overview: The document outlines the technical specifications and application guidelines for the CE-H Hall Effect Current Analog Transducer series by Shenzhen Sensor Electronic Technology Co., Ltd., detailing various case styles (D, E, L) and their specifications, applications, and wiring instructions.

Specifications:
  • Linearity Range: Up to 1.5 times the nominal current.
  • Response Time: Varies by case style, with some as low as 1μS.
  • Overload Capability: Generally 2 times the maximum measuring range, with exceptions.
  • Accuracy: Between 0.5% and 1% depending on the case style.
  • Isolation: 3KVRMS/50Hz/min for most cases.
  • Operating Temperature Range: -10 to +80°C.
  • Fire Retardancy: UL94-V0.

Applications: Suitable for measuring DC, AC, and pulsant currents, used in frequency conversion speed adjusting equipment, power supplies, UPS systems, electric welding machines, etc.

Connection and Wiring:
  • Correct power supply and output connections are crucial to avoid damage.
  • Wiring instructions vary by case style, with specific terminals for power supply and output.
  • Potentiometers can be adjusted for accuracy if necessary.

Power Supply and Dimensions: Details on power supply models CE-WYS-1 and CE-WYS-2, including input voltage, rated current output, and output voltage specifications.

Ordering and Warranty:
  • Orders must include complete product descriptions and specifications.
  • Warranty covers defects in workmanship and material, with support available through the company's technical department.
See more

Catalog excerpts

Hall Effect Analog Current Transducer-1

HALL EFFECT CURRENT ANALOG TRANSDUCER Shenzhen Sensor Electronic Technology Co., Ltd. East Block., Building No. 2, SEG Science & Technology Park, Shenzhen, China Post Code: 518028 TEL: (+86-755)8376 8604, 8376 2487 FAX: (+86-755)8376 3161 E-mail: [email protected] [email protected] http://www.ce-transducer.com http://www.sset-transducer.com Series CE-H Hall Effect Current Analog Tran

 Open the catalog to page 1
Hall Effect Analog Current Transducer-2

Shenzhen Sensor Electronic Technology Co., Ltd. Introduction Shenzhen Sensor Electronic Technology Co., Ltd specializes in research, development, and manufacturing of electrical transducers. Our advanced test instrumentation and engineering capabilities provide a most favorable environment for transducer manufacturing. Our quality and inspection departments are among the most advanced in China. The output of our production facility is over one hundred thousand units annually. The most important aspect of our production is “Quality”. Our products are manufactured and certified to the 2000 quality...

 Open the catalog to page 2
Hall Effect Analog Current Transducer-3

Series CE-H Hall Effect Current Analog Transducer

 Open the catalog to page 3
Hall Effect Analog Current Transducer-4

Input Parameter I: current Input Characteristics J: AC; Z: DC; Typical Example CE-IZ04-35A2-1.0/0~50A: DC current transducer, case: A2, input current: DC 0~50A, output: 0~5V, power supply: ±12V, accuracy: 1.0%. Series CE-H Hall Effect Current Analog Transducer

 Open the catalog to page 4
Hall Effect Analog Current Transducer-5

Electronic Technology CQ>, Ltd Chapter 2. Product Overview 2.1 Characteristic of the product Hall Effect current transducer series CE-H provides strong electrical isolation between the output of the transducer (secondary circuit) and the current carrying conductor (primary circuit with high current). The output of the transducer reflects the real wave of DC, AC and pulsant currents of the primary circuit. This series combines many advantages of fast response, strong overload capability, good temperature independence, consecutive adjustable output, good stability, etc. Series CE-H Hall Effect...

 Open the catalog to page 5
Hall Effect Analog Current Transducer-6

Chapter 3. Product Tree 3.1 Hall Effect DC current analog transducer series CE-IZ04 Case Style A 3.1.1 List of options 3.1.3 Cases of series A Application Characteristic: Can be used for measuring DC, AC, pulsant currents, etc. The output of the transducer reflects the real wave of the measured current. Characteristic of Products: Small size, light in weight, less power consumption, window structure, electrically isolating the output of the transducer from the primary current carrying conductor, no insertion loss. Application: Frequency conversion speed adjusting equipment, various power supply,...

 Open the catalog to page 6
Hall Effect Analog Current Transducer-7

Two potentiometers can be adjusted, only if necessary, by turning slowly to the required accuracy with a small screwdriver. The best accuracy can be achieved when the window is fully filled with bus-bar (current carrying conductor). The in-phase output can be obtained when the direction of current of current carrying conductor is the same as the direction of arrow marked on the transducer case. 3.2.3 Cases of series B Application Characteristic: Can be used for measuring DC, AC, pulsant currents etc. The output of the transducer reflects the real wave of the measured current. Characteristic of...

 Open the catalog to page 7
Hall Effect Analog Current Transducer-8

same as that of the current passing the window in the direction of the arrow indicated on the transducer case. 1. Connect the terminals of power supply, outputs respectively and correctly, never make wrong connection. 2. Two potentiometers can be adjusted, only if necessary, by turning slowly to the required accuracy with a small screwdriver. 3. The best accuracy can be achieved when the window is fully filled with bus-bar (current carrying conductor). 4. The in-phase output can be obtained when the direction of current of current carrying conductor is the same as the direction of arrow marked...

 Open the catalog to page 8
Hall Effect Analog Current Transducer-9

Electronic Technology CQ>, Ltd 3.3.2 General specifications 3.3.3 Cases of series C Application Characteristic: Can be used for measuring DC, AC, pulsant currents, etc. The output of the transducer reflects the real wave of the measured current. Characteristic of Products: Small size, light in weight, less power consumption, window structure, electrically isolating the output of the transducer from the primary current carrying conductor, no insertion loss. Application: Frequency conversion speed adjusting equipment, various power supply, UPS, electric welding machine, transformer substation,...

 Open the catalog to page 9
Hall Effect Analog Current Transducer-10

Electronic Technology CQ>, Ltd 4. Ground 5. Output Notes: 1. Connect the terminals of power supply, outputs respectively and correctly, never make wrong connection. 2. Two potentiometers can be adjusted, only if necessary, by turning slowly to the required accuracy with a small screwdriver. 3. The best accuracy can be achieved when the window is fully filled with bus-bar (current carrying conductor). 4. The in-phase output can be obtained when the direction of current of current carrying conductor is the same as the direction of arrow marked on the transducer case 3.4 Hall Effect DC current analog...

 Open the catalog to page 10
Hall Effect Analog Current Transducer-11

3.4.3 Cases of series D Application Characteristic: Can be used for measuring DC, AC, pulsant currents, etc. The output of the transducer reflects the real wave of the measured current. Characteristic of Products: Small size, light in weight, less power consumption, window structure, electrically isolating the output of the transducer from the primary current carrying conductor, no insertion loss. Application: Frequency conversion speed adjusting equipment, various power supply, UPS, electric welding machine, transformer substation, digital control machine tool, electrolyzing equipment, electroplating...

 Open the catalog to page 11
Hall Effect Analog Current Transducer-12

3.5 Hall Effect DC current analog transducer series CE-IZ04 case style E 3.5.1 List of options 3.5.3 Cases of series E NOTE: Case style E4, 5 (10mA-10A) are mainly used to measure or monitor system for current leakage. Application Characteristic: Can be used for measuring DC, AC, pulsant currents, etc. The output of the transducer reflects the real wave of the measured current passing through the carrying conductor. Characteristic of Products: Small size, light in weight, less power consumption, window structure, electrically isolating the output of the transducer from the primary current carrying...

 Open the catalog to page 12

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.