- Catalogs
- Shenzhen Ruicom Technology Co., Ltd.
- RUICOM NTS6 Series Current Output Tilt Sensor
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
RUICOM NTS6 Series Current Output Tilt Sensor
RUICOM NTS6 Series Current Output Tilt Sensor
The NTS6 series tilt sensor by RUICOM is a compact MEMS single-axis sensor designed for applications with space and cost constraints. It offers excellent linear current output, supports long-distance signal transmission up to 2000 meters, and is resistant to electromagnetic interference and shock, making it ideal for harsh industrial environments. It provides real-time tilt angle output and is easy to install without calibration.
Application Scope
- Angle control for engineering machinery
- Leveling of medical beds
- Gimbal operation monitoring
- Satellite antenna positioning
- Automobile four-wheel alignment and chassis measurement
Technical Highlights
- Output: 4~20mA
- Measuring range: ±10°~±90° selectable
- Accuracy: 0.1°
- Operating temperature: -40 to +85℃
- Power supply: DC9 ~36V
Performance Parameters
- Measurement range: ±30° to 360°
- Resolution: 0.02° to 0.08°
- Accuracy: 0.1° to 0.2°
- Long-term stability: <0.5°
- Response frequency: 20 Hz
- Waterproof rating: IP67
Ordering and Selecting
Models are available with different housings, axes, ranges, and installation methods. Example: NTS3X10-A1-H indicates a PCBA board, X-axis, ±10° range, 4~20mA output, horizontal installation.
Electrical Parameters
- Supply voltage: 9 to 36 V
- Operating current: 12 mA
- Output load: 10 kΩ resistive, 20 nF capacitive
Interface Definition
Wire colors and pin definitions are provided for power supply and output current connections.
Product Dimensions
- PCBA board: L33 × W27 × H8.2 mm
- Shell: L55.5×W37×H29mm, anodized aluminum
Installation Orientation
The sensor should be mounted parallel to the target surface, minimizing dynamic and acceleration effects. It can be installed horizontally or vertically.
Catalog excerpts
Product manual
Open the catalog to page 1
Technical Highlights ❖ Measuring range: ±10°~±90° selectable; ❖ Wide operating temperature range: -40 ~+85°C; Product Introduction- The NTS6 series tilt sensor, developed by RUICOM, is a small-sized MEMS single-axis tilt sensor. Its output current, after internal double linearity correction, exhibits excellent linear current output characteristics, primarily targeting applications with specific requirements for installation space and cost. This product integrates a tilt sensing unit based on microelectromechanical technology, is compact in size, supports long-distance signal transmission (up...
Open the catalog to page 2
Performance Parameters Angle output calculation formula Angle = (Output Current - Zero-Point Current) + Angle Sensitivity Angle Sensitivity = Output Current Range + Angle Measurement Range Example: NTS6X10-V1 -H (±10° Measurement Range 4 ~20mA Output Current Range) Angle Sensitivity=(20-4M + 10°-(-10°))= 1 6+20=0.8 mA/°
Open the catalog to page 3
Product Dimensions PCBA Board Dimensions PCBA board dimensions: L33 × W27 × H8.2 mm Recommended screws: 4 × M3 screws Package dimensions Shell dimensions: L55.5×W37×H29mm Shell material: anodized aluminum Connector: aviation plug 12G-5P Suggested screws: 3 M4 screws
Open the catalog to page 5
Installation Orientation During installation, the sensor mounting surface should be kept parallel to the target surface, and the effects of dynamics and acceleration on the sensor should be minimized. This product can be installed horizontally or vertically; please refer to the diagram below for installation instructions: Web: www.ruicomtech.com E-mail: [email protected] Tel: 0755-23087719 After-sales technical support:+86 183 0761 1639 Add:Building 1, Lixin Lake Creative Park, 1 Furui Rd, Fuhai St, Bao'an, Shenzhen China
Open the catalog to page 6All Shenzhen Ruicom Technology Co., Ltd. catalogs and technical brochures
- Display module
- Industrial display panel
- Acceleration sensor
- Color display panel
- Tilt sensor
- Digital inclination sensor
- Triaxial acceleration sensor
- Built-in display
- 2-axis tilt sensor
- MEMS inclination sensor
- Multi-axis tilt sensor
- High-precision tiltmeter
- Analog inclination sensor
- IP67 inclination sensor
- Industrial accelerometer
- 1-axis tilt sensor
- MEMS accelerometer
- RS-485 display panel
- Accelerometer with built-in electronics
- Vibration sensor