LTS6 Low-power tilt sensor with voltage output Product manual V2.0-20250723

Technical Highlights ❖ 0~5V output; ❖ Wide voltage input 9 ~36V; ❖ High vibration resistance >3500g; ❖ Long working life for 10 years. The LTS6 series voltage output tilt angle sensor is a cost-effective full attitude angle measurement product independently developed by RUICOM Technology. This product is designed based on an innovative anti-interference platform, equipped with a new generation MEMS sensing core, with wide temperature range adaptability and excellent anti vibration performance, excellent working stability, and a designed service life of up to 10 years. This product adopts the...

E.g: LTS6X10-V1 -H: X-axis, ±10° Range, 0~5V output, horizontal installation. Note: The Range of 0 °~360° is limited to single axis X-axis (clockwise rotation measurement), and the vertical upward installation only.

1. This sensor is based on the principle of Earth's gravity angle measurement. During installation, the sensing axis must be parallel to the measured tilt axis, and the installation surface must be flat and tightly fitted to ensure measurement accuracy. 2. Install in the direction selected by the factory. After power on, the current position can be set as the reference zero point through the zero reset command, and the relevant parameters are stored in the built-in memory. 3. IP67 protection level, can prevent rainwater and high-pressure water spray, but long-term immersion is prohibited; Damaged...

Measurement direction Note: The product defaults to a horizontal upward installation method at the factory. Users can set the corresponding installation method according to their needs. Please refer to Article 2 of the user manual for the corresponding settings.

Output characteristics The output of this product is a DC voltage of 0V to 5V, corresponding to the minimum and maximum measurement ranges of the angle measurement range. When calculating the angle, the corresponding angle value can be obtained by proportionally allocating it. For example, LTS6X30-V1-LU: indicates that the angle range of this product is ± 30 °, the output voltage is 0V to 5V, and proportionally allocating 0 ° results in an output voltage of 2.5V and a sensitivity of 0.08333 V/°. The following figure shows the output characteristic curve. The following figure shows the output...