Product Introduction
The DTS6-V1 is a dynamic tilt sensor with voltage output, designed to measure roll and pitch angles across two axes. It uses MEMS technology, integrating a three-axis accelerometer and gyroscope, and employs a six-axis Kalman filter algorithm for real-time dynamic attitude angle calculation. The sensor outputs an analog voltage signal (0-5V DC) and is suitable for both moving and stationary objects. It features non-contact measurement, easy installation, and high resistance to electromagnetic interference, shock, and vibration.

Application Scope
This sensor is ideal for use in cranes, construction machinery, agricultural machinery, mobile elevators, fire trucks, automated guided vehicles (AGV), automated assembly machinery, and boring and drilling applications.

Technical Highlights

• Measuring range: ±1° to ±90° selectable
• Dynamic accuracy: ±0.3°
• Static accuracy: ±0.05°
• Output mode: 0~5V

Performance Parameters
The sensor offers various measurement ranges (±10° to ±180°) with corresponding dynamic and static accuracies. It features a zero output of 2.5V, a resolution of up to 0.01°, and a response time of 0.01 seconds. It is compliant with EN61000 and GBT17626 standards for electromagnetic compatibility and has a waterproof rating of IP67.

Electrical Parameters

• Supply voltage: 9-36V (standard), 5V (optional)
• Operating current: 30 mA
• Operating temperature: -40 to +85°C

Ordering and Selection
Models are available with different configurations, including axis selection (X, Y, Dual), measurement range, voltage output, and installation orientation (horizontal, vertical).

Angle Output Calculation
The angle is calculated using the formula: Angle = (Output Voltage - Zero-Point Voltage) ÷ Angle Sensitivity, where Angle Sensitivity = Output voltage range ÷ Angle measurement range.

Interface Definition
The sensor's interface includes power supply terminals and voltage outputs for the X and Y axes, with specific line color coding for easy identification.

Product Dimensions
The shell dimensions are L77.9×W42×H23mm, and the PCBA dimensions are L46×W35.5×H12.5mm, with recommended screw sizes for installation.