Catalogs >
SHENZHEN RION TECHNOLOGY CO.,LTD >
TL766D Azimuth Angle Sensor

TL766D Azimuth Angle Sensor
8Pages

Catalog excerpts

TL766D- Angular Gyro Sensor SPECIFICATIONS Item No.：TL766D Desc.：Angular Gyro Sensor Production implementation standard reference ● Enterprise quality system standards: ISO9001: 2008 standard (certification number: 128101) ● Tilt sensor production standards: GB / T 191 SJ 20873-2003 inclinometer general specification of Level ●The Academy of metrology and quality inspection Calibrated in accordance to: JJF1119-2004 Electronic Level calibration Specification ● Software development reference standard: GJB 2786A-2009 military software development General requirements ● Product environmental testing standards: GJB150 ● Electromagnetic anti-interference test standards: GB / T 17626 ● Version:Ver.01 ● Dat

Open the catalog to page 1

TL766D-Angular Gyro Sensor General Description TL766D is RION company newly developed three axis angle instrument based on latest MEMS inertial measurement platform , it can simultaneously output Moving carrier’s horizontal angle , vertical angle and horizontal azimuth . The internal integration of the triaxial accelerometer and triaxial angular rate of the inertia unit, by integrating the angular velocity of the object, and then with the attitude angle of the multi model data fusion, can real-time update of the horizontal azimuth output. This product is specially used for robot car, AVG...

Open the catalog to page 2

TL766D-Angular Gyro Sensor Technical Data BSSfiHJS RION TECHNOLOGY sales@ rion-tech.net www.rion-tech.net

Open the catalog to page 3

TL766D- Angular Gyro Sensor Notice 1.The angular gyro sensor should be mounted in the center position of the measured object , in order to reduce the influence of linear acceleration on the measurement accuracy. 2. The installation of the instrument should be kept parallel to the surface of the measured object, and reduce the influence of the dynamic and acceleration on the angle meter. Incorrect installation will lead to measurement errors, with particular attention to "surface" and” line "

Open the catalog to page 4

TL766D-Angular Gyro Sensor 1) The mounting surface of the instrument fixing must be close, smooth and stable with the measured surface. If the mounting surface is not smooth, the angle error of angle measurement can be caused easily. See figure Pic.AB 2)The axis of the instrument must be parallel to the axis of measurement, and the two axis should not be included angle as far as possible , see figure Pic.CD 3. Do not shake violently during the use of the product, avoid violent vibration, away from the vibration source (if you can not avoid please install the shock absorber), so as not...

Open the catalog to page 5

1.DATA FRAME FORMAT: (8 bits date, 1 bit stop, No check, Default baud rate 9600) RION TECHNOLOGY sales@ rion-tech.net www.rion-tech.net

Open the catalog to page 6

>=KMore products information, please refer to the company's Website : www.rion-tech.net BSSfiflJS RION TECHNOLOGY sales@ rion-tech.net www.rion-tech.net

Open the catalog to page 7

CHINA SHENZHEN RION TECHNOLOGY CO.,LTD. •INCLINOMETER •TILT SWITCH ‘ACCESSORIES ‘NORTH FINDER ‘TURNTABLE •ELECTRONIC COMPASS ‘DIGITAL INCLINOMETER ‘ACCELEROMETER ‘ATTITUDE AND HEADING REFERENCE SYSTEM ‘ELECTRONIC GYROSCOPE T : 0755-29657137/29761269 F : 0755-29123494 W : www.rion-tech.net E : sales@rion-tech.net A: 4 th Floor Block 1, COFCO(FUAN) Robotics Industrial Park , Da Yang Road 90, Fuyong Distict, Shenzhen City, China

Open the catalog to page 8

TL766D Azimuth Angle Sensor 8Pages

Catalog excerpts

All SHENZHEN RION TECHNOLOGY CO. catalogs and technical brochures

TL766D Azimuth Angle Sensor
8Pages