Website:
SHENZHEN RION TECHNOLOGY CO.,LTD
Catalog excerpts
SDA116T/SDA126T Dynamic-Static Dual Mode Inclinometer SPECIFICATIONS Model: SDA116T/SDA126T Description: Dynamic-Static Dual Mode Inclinometer Production implementation standard reference ●ISO9001:2008（Certificate no.：128101） ●CE:AT011611741E FCC:AT011611742E ● Tilt sensor production standards: GB / T 191 SJ 20873-2003 inclinometer general specification of Level ● The Academy of metrology and quality inspection Calibrated in accordance to: JJF1119-2004 Electronic Level calibration Specification ● Gyro accelerometer test standard: QJ 2318-92 Gyro accelerometer test methods ●Software development reference standard: GJB 2786A-2009 military software development General requirements ● Product environmental testing standards: GJB150 ● Electromagnetic anti-interference test standards: GB / T 17626 ● Version：V
Open the catalog to page 1
SDA116T/SDA126T Dynamic-Static Dual Mode Inclinometer SDA DYNAMIC INCLINOMETER Industrial-grade products | Reliable performance Scalability | A variety of output options. Description SDA116T/SDA126T is RION's MODBUS output dynamic and static dual-mode tilt sensor for industrial field control. It integrates dynamic and static dual-mode combination algorithms. According to different working conditions, the product automatically switches between dynamic and static measurement modes. High-precision measurement of products is guaranteed in a variety of work environments. When the working...
Open the catalog to page 2
SDA116T/SDA126T Dynamic-Static Dual Mode InclinometerApplication • Satellite antenna search star • Rail-mobile monitoring •Tilt angle measurement of High-altitude construction machinery •oil-well drilling equipment •Radar detection of vehicle platform •Gun Barrel angle measurement in early shooting •Satellite communications vehicle posture detection •Ship’s navigation posture measurement •Underground drill posture navigation • Based on the angle direction measurement •Shield pipe jacking application •Geological equipment inclined monitoring Ordering Information: Technical Data Parameters...
Open the catalog to page 3
SDA116T/SDA126T Dynamic-Static Dual Mode Inclinometer temperature coefficient *This Technical data only list ± 10 °, ± 30 °, ± 60 °, + 90 ° series for reference, other measuring range please refer to the adjacent parameters. Mechanical Parameters o Connectors: 1m lead cable (customized) o Protection glass: IP67 o Enclosure material : Aluminum Oxide o Installation : 4*M6 screws
Open the catalog to page 4
SDA116T/SDA126T Dynamic-Static Dual Mode Inclinometer Working Principle Adopt the European import of core control unit, using the capacitive micro pendulum principle and the earth gravity principle, when the the inclination unit is tilted, the Earth's gravity on the corresponding pendulum will produce a component of gravity, corresponding to the electric capacity will change, , by enlarge the amount of electric capacity , filtering and after conversion then get the inclination. Ur, Ui_Respectively is the pendulum left plate and the right plate corresponding to their respective voltage...
Open the catalog to page 5
SDA116T/SDA126T Dynamic-Static Dual Mode Inclinometer Vertical install Production Installation Notes: Please follow the correct way to install tilt sensor, incorrect installation can cause measurement errors, with particular attention to the "surface", "line":: 1) The Sensor mounting surface and the measured surface must be fixed closely, smoothly, stability,if mounting surface uneven likely to cause the sensor to measure the angle error. See Figure Pic.AB 2) The sensor axis and the measured axis must be parallel ,the two axes do not produce the angle as much as possible. See Figure Pic.CD
Open the catalog to page 6
SDA116T/SDA126T Dynamic-Static Dual Mode Inclinometer
Open the catalog to page 7
SDA116T/SDA126T Dynamic-Static Dual Mode Inclinometer 4) for sake of system reliability, when set address and relative/absolutive command, it should be send two times continuously, which means two successful sending with continuous responses by slave, that is no data frame between the two inquiries, or the command will be locked till power off. Set as below: Send set address command-stand by for slave response set success command—send again set address command(no other command between)—stand by for slave response set success command-successful revision After power-up, two set commands...
Open the catalog to page 8
SDA116T/SDA126T Dynamic-Static Dual Mode Inclinometer 1 .Data frames format: RTU Mode Communication Parameter: Baud rate 9600 bps Data frames: 1 Start bit, 8 datas, even parity check, 1 stop bit 2. Read angle data: Modbus FUNC 03H sales@rion-tech.net www.rion-tech.net
Open the catalog to page 9
SDA116T/SDA126T Dynamic-Static Dual Mode Inclinometer Relative / Absolute Setting ZERO command application example： Host computer sending Slave computer response 01 H Note： 0010 is register address ， the register control inclinometer output is relative ZERO or absolute ZERO。If nonzero（As example as above，was written in 00FFH） ，the output is relative ZERO。 On contrary if zero （will change the fiveth and sixth bytes to 00H） then is absolute ZERO,. the last ， two bytes is CRC checksum . 4. Setting inclinometer address: Setting Slave computer response command： Inclinometer FUNC Inclinometer...
Open the catalog to page 10
SDA116T/SDA126T Dynamic-Static Dual Mode Inclinometer Sensor baud rate All commands must be sent twice Example of set sensor address command More products information, please refer to the company's Website : www.rion-tech.net (Note: product functions, parameters and appearance will be adjusted as the technology is upgraded, please confirm with the pre-sales business contact before purchase.)
Open the catalog to page 11
SDA116T/SDA126T Dynamic-Static Dual Mode Inclinometer INCLINOMETER -TILT SWITCH ‘ACCESSORIES ‘NORTH FINDER -TURNTABLE •ELECTRONIC COMPASS •DIGITAL INCLINOMETER -ACCELEROMETER •ATTITUDE AND HEADING REFERENCE SYSTEM -ELECTRONIC GYROSCOPE T : (86) 755-29657137 F : (86) 755-29123494 W : www.riontech.cn E : sales@rion-tech.net A: Block 1, COFCO(FUAN) Robotics Industrial Park , Da Yang Road 90, Fuyong Distict, Shenzhen City, China
Open the catalog to page 12All SHENZHEN RION TECHNOLOGY CO. catalogs and technical brochures
-
accelerometer for wind power37 Pages
-
3 AXIS ATTITUDE GYRO RION TL735G18 Pages
-
AH200C MEMS18 Pages
-
RION ACA2000T11 Pages
-
Rion Product Catalog23 Pages
-
TL766D Azimuth Angle Sensor8 Pages
-
3R30-05 3Axis Turntable4 Pages
-
NF601North finder13 Pages
