Website:
SHENZHEN RION TECHNOLOGY CO.,LTD
Catalog excerpts
SCA116T – CAN Bus Type Single-Axis Inclinometer SCA11 SPECIFICATIONS Item No.SCA116T-CAN No. DescriptionCAN Bus Type Single-Axis Inclinometer Description Production implementation standard reference ● Enterprise quality system standards: ISO9001: 2008 standard (certification number: 128101) ● Tilt sensor production standards: GB / T 191 SJ 20873-2003 inclinometer general specification of Level ● The Academy of metrology and quality inspection Calibrated in accordance to: JJF1119-2004 Electronic Level calibration Specification ● Gyro accelerometer test standard: QJ 2318-92 Gyro accelerometer test methods ● Software development reference standard: GJB 2786A-2009 military software development General requirements ● Product environmental testing standards: GJB150 ● Electromagnetic anti-interference test standards: GB / T 17626 ● VersionVer.09 ● Date:2014.4.22
Open the catalog to page 1
SCA116T – CAN Bus Type Single-Axis Inclinometer SCA11 General Description SCA116T is a CAN 2.0B output single-axis inclinometer launched by RION company to the industrial field control , using industry standard isolated CAN transceiver, built-in high-precision A / D differential converter, by 5 filtering algorithm, which can measure the angle of sensor output relative to the horizontal tilt and pitch tilt. Because of Built in ADI company’s high precision digital temperature sensor that can correct the sensor temperature drift in accordance with the changes of the built-in temperature...
Open the catalog to page 2
SCA116T – CAN Bus Type Single-Axis Inclinometer SCA11 Ordering information: Technical Data Parameters range Measuring axis Response time accuracy Long term stability Zero temperature coefficient Sensitivity temperature coefficient Output rate Output signal Resistance Shockproof Anti-vibration Protection glass Cables Standard 1M length、wearproof、grease proofing、wide temperature、 Shielded cables 4*0.4mm2
Open the catalog to page 3
SCA116T - CAN Bus Type Single-Axis Inclinometer This Technical data only list ± 10 °, ± 30 °, ± 60 °, + 90 ° series for reference, other measuring range please refer to the adjacent parameters Electronic Characteristics Resolution: Refers to the sensor in measuring range to detect and identify the smallest changed value. Absolute accuracy: Refers to in the normal temperature circumstances,the sensor absolute linearity, repeatability, hysteresis, zero deviation, and transverse error comprehensive error. Long term stability : Refers to the sensors in normal temperature conditions, the...
Open the catalog to page 4
SCA116T - CAN Bus Type Single-Axis Inclinometer Typical performance diagram Temperature characteristic chart Measuring Directions&Fix The installation must guarantee the product bottom is parallel to measured face, and reduce the influence of dynamic and acceleration to the sensor. This product can be installed horizontally or mounted vertically (mounted vertically selection is only applicable to the single axis), for installation please refer to
Open the catalog to page 5
SCA116T - CAN Bus Type Single-Axis Inclinometer Production installation notes: Please follow the correct way to install tilt sensor, incorrect installation can cause measurement errors, with particular attention to the "surface", "line":: 1) The Sensor mounting surface and the measured surface must be fixed closely, smoothly, stability,if mounting surface uneven likely to cause the sensor to measure the angle error. See Figure Pic.AB 2) The sensor axis and the measured axis must be parallel ,the two axes do not produce the angle as much as possible. See Figure Pic.CD Electrical Connection
Open the catalog to page 6
SCA116T – CAN Bus Type Single-Axis Inclinometer SCA11 Product Protocol NetworkCAN 2.0 Baud Rate250kbps ID29 position modefixed 0x100Hexadecimal hexadecimal Data byte number8 Data byte definition The first and second bytes, respectively for the lower 8 bits and upper 8 bits of the X axis inclination value, range from 0 to 16383 (14 bits wide), when the X-axis is horizontal, the output is 8191, the maximum negative inclination is 0, the maximum positive inclination is 16383; The third and fourth bytes, respectively for the lower 8 bits and upper 8 bits reserved data of the Y axis inclination...
Open the catalog to page 7
CHINA SHENZHEN RION TECH NO LOGY CO., LTD.
Open the catalog to page 8All SHENZHEN RION TECHNOLOGY CO. catalogs and technical brochures
-
accelerometer for wind power37 Pages
-
3 AXIS ATTITUDE GYRO RION TL735G18 Pages
-
AH200C MEMS18 Pages
-
RION ACA2000T11 Pages
-
Rion Product Catalog23 Pages
-
TL766D Azimuth Angle Sensor8 Pages
-
3R30-05 3Axis Turntable4 Pages
-
NF601North finder13 Pages
