WCA300M SINGLE AXIS TILT SENSOR MODULE V1.7 WCA300M single-axis inclination module is a new low-cost inclination module independently developed. It adopts the latest anti-jamming platform design and integrates a new micro-mechanical sensing unit. It has wide temperature working performance, superior anti-vibration performance, stable and reliable long-term work, and effective work. The life span is up to 10 years. Each module goes through the factory's strict calibration procedure, which effectively eliminates the zero-bias error. Cross axial error, linearity error. Using tape packaging, it can be directly used for automatic placement with SMT placement machine, which is more efficient and lower-cost. ★Solar photovoltaic tracking system ★Wind deviation monitoring ★Hospital bed ★Vertical monitoring ★Building tower crane ★Electric vehicle control ★Woodworking machinery ★ ResolutionO.I0 ★ Large range ★Output TTL *work voltage DC3.3-7V ★Good performance at full temperature ★High vibration resistances OOg Over-current, over-temperature, over-voltage protector, wide voltage regulator Output driver Calibration data memory VERTICAL INSTALLATION MEASUREMENT ▼ WCA300M-V:Vertical installation mode, MODBUS protocol. INSTRUCTIONS FOR USE 1. During installation, the sensor axis must be parallel to the tilt axis of the measured object, and must be close, flat and stable with the measured surface to achieve the ideal measurement accuracy. If the mounting surface is uneven, it will easily cause the sensor to measure the angle error; 2. When wiring, please note that the signal line and the positive pole of the power cord cannot be short-circuited to avoid burning the output circuit. The negative signal of this product is shared with the negative pole of the power supply. Please connect the negative signal of the collection terminal to the negative pole of the power supply of this pr

WCA300M SINGLE AXIS TILT SENSOR MODULE V1.7 WIRING DEFINITION ^ NC:No connection pin, fixed function PRODUCT PACKAGING SPECIFICATIONS ^ 0.00 mm^ Packing: PET anti-static blister box with 72 grids; size:297*210*6mm; Number of Plates: 72 grids/plate; Packaging purpose: The blister pack can be directly placed to the chip mounter, reducing the production process and transportation damage rate.

WCA300M SINGLE AXIS TILT SENSOR MODULE V1.7 WCA300M SINGLE AXIS TILT SENSOR MODULE V1.7 R is read-only, R/W is read and write register. Use 03H to read register, 06H to write register, 42H to read local address. Note: The addresses in the following command examples are random values, the actual product address is subject to the actual product, and the factory default address is 02H. Address Function Code Address Start High Byte Address Start Low Byte Address Number High Byte Address Number Low Byte CRC Check Address Function Code Return Data Byte Numbers The Current Address The Current Address...