Introduction
The document provides technical specifications and installation guidelines for the MCA416/426T series tilt sensor developed by Rion-tech. This sensor is designed for measuring the inclination angle of objects using a non-contact principle.

Specifications
The tilt sensor features IP67 protection, making it resistant to rain and strong water sprays, though prolonged submersion should be avoided to prevent circuit damage. It uses a capacitive micro-mechanical unit to measure inclination angles based on Earth's gravity.

Installation Guidelines
1. Ensure the sensor's induction axis is parallel to the inclination axis of the measured object for optimal accuracy. The sensor must be installed on a tight, flat, and stable surface to avoid measurement errors.
2. The sensor can be installed on any of six surfaces. After installation, set the zero point using the ZERO command, which stores the setting in the product's internal memory.
3. Avoid short-circuiting the signal line and the power line's positive pole during wiring to prevent damage. The negative pole of the signal should be connected to the negative pole of the power supply.

Product Features
The MCA416/426T series is a low-cost, full-attitude tilt angle measurement product with an anti-interference platform design. It integrates new micro-mechanical sensing units, offers wide temperature working performance, superior anti-vibration performance, and a long-term stable operation life of up to 10 years.

Standards and Certifications
The product complies with IATF16949:2016 (No.: T178487) and GJB9001C-2017 Standard (No.: 02622J31799R0M), ensuring high-quality manufacturing and reliability.

Contact Information
Rion Technology, located at 4th Floor Block 1, COFCO(FUAN) Robotics Industrial Park, Shenzhen City, China, can be contacted via phone at (86)755-29657137 or email at [email protected].