Catalogs >
SHENZHEN RION TECHNOLOGY CO.,LTD >
Rion inclinometer MCA416LD

Rion inclinometer MCA416LD
1 / 10Pages

Catalog excerpts

LOW-POWER INCLINOMETER

○ CE certification: ATSZAHE181129003 ○ China National Intellectual Property Appearance Patent (Patent No.: ○ Revision time:2024-08-06 Note: Product functions, parameters, appearance, etc. will be adjusted as the technology upgrades. Please contact our pre-sales business to confirm when purchasing. Disclaimer This product is developed exclusively for commercial applications and is prohibited from being used for illegal purposes, such as military activities, research related to nuclear, chemical, or biological weapons, or any other actions that violate laws and regulations. It is strictly...

Open the catalog to page 2

▶ INTRODUCTION MCA416L is a low-power MODBUS output single-axis inclinometer developed by RION Technology for the industrial on-site control. it adopts the latest anti-interference platform design, integrates a new type of micro-mechanical sensing unit, wide temperature working performance, superior anti-vibration performance, and long-term stability. Reliable, effective working life of up to 10 years. This product uses the non-contact principle to measure the inclination angle of the object and calculates the real-time inclination angle by measuring the components produced by the earth's...

Open the catalog to page 3

Measure range Measure axis Single axis（Y axis） Absolute accuracy Zero temp. coefficient Output Interface communication protocol Insulation resistance 100g@11ms、three axes direction(half sinusoid) Waterproof grade Housing material Sand-grinding oxidation of aluminum alloy Standard 1-meter length, anti-ultraviolet, shielded cable 4*0.4mm2 Glossary: Resolution: Refers to the smallest change value of the measured that the sensor can detect and distinguish within the measurement range. ▶ ELECTRICAL PARAMETERS PARAMETERS Supply voltage Working current Sleep current Operating temperature

Open the catalog to page 4

MCA416L LOW-POWER INCLINOMETER ▶ WORKING PRINCIPLE It adopts imported core control unit and the principle of capacitive miniature pendulum. Using the principle of earth's gravity, when the inclination unit is tilted, the earth's gravity will produce a component of gravity on the corresponding pendulum, and the corresponding capacitance will change. The inclination angle can be obtained by amplifying, filtering, and converting the capacitance.

Open the catalog to page 5

Shell size: L61 × W35 × H21mm Installation size: L52 × W17 × H4mm Mounting screws: 3 M4 screws ▶ ELECTRICAL CONNECTION Color ▶ RION MODBUS COMMUNICATION PROTOCOL Note, please read the following items carefully before use: 1) Because the MODBUS protocol stipulates that the time between two data frames should be at least 3.5 bytes (for example, at a baud rate of 9600, the time is 3.5×(1/9600)×11=0.004s). But in order to leave enough margin, this sensor increases this time to 10ms, so please leave at least 10ms time interval between each data frame. The host sends a command-10ms idle-the slave...

Open the catalog to page 6

MCA416L LOW-POWER INCLINOMETER Function code Function code Access register first Data length 8 bytes Data word 1 high 8 bits Data word 1 low 8 bits Data word 2 high 8 bits Data word 2 low 8 bits Data word 3 high 8 bits Data word 3 low 8 bits Data word 4 high 8 bits Data word 4 low 8 bits Data length 4 bytes CRC Example 1 for reading measurement data command: Host send Note: The data field of the reply frame from the slave is 00H, 00H, 00H, 00H, 23H, 20H, 00H, 00H The X axis is the 1st to 4th byte of the data field, and the Y axis is the 5th to 8th byte of the data field, with the low byte...

Open the catalog to page 7

MCA416L LOW-POWER INCLINOMETER Modbus function code 06H Set relative/absolute zero command: Slave response: Sensor address Sensor address Function code Function code Access register first zero, it is absolute zero Relative / absolute zero, it is absolute zero Relative / absolute Register address Example of Set the relative/absolute zero command: Host send Note: 0010 is the register address. This register controls whether the sensor output is relative zero or absolute zero. If it is non-zero (as in the above example, 00FFH is written), the output is a relative zero. On the contrary, if it is...

Open the catalog to page 8

MCA416L LOW-POWER INCLINOMETER communication communication character Set sensor communication character format: Host send In the above example, the byte format is set to: 1 start bit + 8 data bits, no parity check + 1 stop bit; it is valid after power-on. Factory default 1 start bit + 8 data bits, even parity + 1 stop bit; Note: 0009 is the register address, which controls the character format of sensor communication, 000H: One start bit + 8 data bits, even parity +1 stop bit 001H: One start bit + 8 data bits without parity +1 stop bit 6. Enter sleep mode (this command must be sent twice to...

Open the catalog to page 9

MCA416L LOW-POWER INCLINOMETER Register Register address Exit sleep mode command: Host send Exit sleep mode broadcast frame Exit sleep mode command: Host send 8. Read sensor address Read sensor address command: Sensor address Slave response: Sensor address Function code Function code Return data byte Address number Read sensor address command: Host send Address code is 1 as the sensor reply

Open the catalog to page 10

Rion inclinometer MCA416LD 1 / 10Pages

Catalog excerpts

All SHENZHEN RION TECHNOLOGY CO. catalogs and technical brochures

Rion inclinometer MCA416LD
1 / 10Pages