ACA610T/ACA620T-N VOLTAGE TILT SENSOR PATENT NO：ZL 201830752872.2 CE certification: AT011611743E FCC certification: AT011611744E RoSH certification: 18300RC20410801 HIGH ACCURACY VOLTAGE TILT SENSOR Technical Manual

ACA610T/ACA620T-N VOLTAGE TILT SENSOR RION PRODUCT QUALIFICATION ○ CE certification: AT011611743E ○ FCC certification: AT011611744E ○ RoHS certification: 18300RC20410801 ○ Revision time:2024-08-06 Note: Product functions, parameters, appearance, etc. will be adjusted as the technology upgrades. Please contact our pre-sales business to confirm when purchasing. Disclaimer This product is developed exclusively for commercial applications and is prohibited from being used for illegal purposes, such as military activities, research related to nuclear, chemical, or biological weapons, or any other...

ACA610T/ACA620T-N VOLTAGE TILT SENSOR ▶ GENERAL DESCRIPTION ACA610T/ACA620T-N is a high-precision single/dual-axis tilt sensor with full temperature compensation and voltage output. it adopts a high-precision 24bit A/D differential converter to ensure the current output linearity of the product, so the user does not need to make the linearity correction. it is stable, reliable and easy to use. The system integrates a high-resolution temperature sensor, coworking with the MCU, processing secondary temperature compensation, by which the full temperature zero drift can be achieved at 0.0005°/℃,...

ACA610T/ACA620T-N VOLTAGE TILT SENSOR Measure range Measure axis Zero output Resolution Measure accuracy Room temp. Room temp. Zero Temp. coefficient Sensitivity temp-coefficient Power on time Response frequency Insulation Resistance 100g@11ms、3 axial direction (half sinusoid) Anti-vibration Protection grade Cables 10grms、10～1000Hz IP67 Standard 7 P * 6.8 mm aviation connector, 2m long, wear-resistant, wide temperature, shielded cable, cable weight ≤ 200g KEY WORDS: Resolution: refers to the sensor in measuring range to detect and identify the smallest changed value. MAXE: refers to the biggest...

ACA610T/ACA620T-N VOLTAGE TILT SENSOR Single axis Output voltage Measure range Installation direction Measure axis AC: Aviation plug connector DL:Direct outgoing line V3: 0~10V 2: Dual axis E.g: ACA610T-10-V1-N-X-AC: Single axis / Horizontal installation / ± 10°Measure range / 0~5V Output voltage / Single Axis X Axis / Aviation plug connector. ▶ MECHANICAL PARAMETERS ○ Connectors : Aviation connector (1 meter direct lead wire; length optional) ○ Protection grade : IP67 ○ Enclosure material : Aluminum Oxide ○ Installation : 4*M4 screws 2*3mm plug position ▶ WORKING PRINCIPLE Adopt imported core...

ACA610T/ACA620T-N VOLTAGE TILT SENSOR ▶ ELECTRICAL CONNECTION SINGLE AXIS ELECTRICAL CONNECTION Wire Color function DC11.5~36V Power supply positive Out X X axis output voltage GND Power supply negative DUAL AXIS ELECTRICAL CONNECTION Wire Color function DC11.5~36V Power supply positive Out X X axis output voltage Out Y Y axis output voltage GND Power supply negative * Signal ground: output voltage signal. Connect the GND of acquisition device.

ACA610T/ACA620T-N VOLTAGE TILT SENSOR ▶ PRODUCTION INSTALLATION NOTES Please follow the correct way to install tilt sensor, incorrect installation can causemeasurement errors, with particular attention to the "surface", "line": 1）The Sensor mounting surface and the measured surface must be fixed closely, smoothly, stability,if mounting surface uneven likely to cause the sensor to measure the angle error. 2) The sensor axis and the measured axis must be parallel ,the two axes do not produce the angle as much as p

ACA610T/ACA620T-N VOLTAGE TILT SENSOR ▶ PRODUCT INSTALLATION DIRECTION During installation, keep the sensor mounting surface parallel to the target surface to be measured, and reduce the impact of dynamics and acceleration on the sensor. This product can be installed horizontally or vertically, please refer to the following diagram for the installation method:

ACA610T/ACA620T-N VOLTAGE TILT SENSOR