Website:
SHENZHEN RION TECHNOLOGY CO.,LTD
RION/high resolution digital inclinometer with display 0.002deg accuracy tilt sensor with screen/DMI850linometer
11Pages
Catalog excerpts
SINCE2008 · Expert Of Inertial Attitude Measurement DIGITAL DISPLAY INCLINOMETER ○Inclinometer ○3D compass ○Digital inclinometer ○Accelerometer ○Gyro ○North finder ○INS&IMU www.rion-tech.net
Open the catalog to page 1
SINCE2008 · Expert Of Inertial Attitude Measurement PRODUCTION AND EXECUTION STANDARD REFERENCE ○ Enterprise Quality System Standard：ISO9001:2008 standard（Authentication number：128101） ○ Intellectual property management system meets the standard：GB/T 29490-2013(certificate number： 18117IP1529R0S) ○ High-tech enterprises (certificate number：GR201844204379） ○ Patent of China National Intellectual Property (Patent No.: ZL 201730609544.2) ○ GJB 585A-1998Inertial technical terminology ○ Software development reference standard： GJB 2786A-2009General requirements for military software development...
Open the catalog to page 2
SINCE2008 • Expert Of Inertial Attitude Measurement •angular resolution : 0.0005° • Maximum measurement range : ±30° •data storage function •working temperature -10° ~ +70°C • Alarm angle can be set • Night vision four color screen ► PRODUCT DESCRIPTION DMI850 is one Single axis Digital Inclinometer developed by RION company based on high precise angle measurement platform, it adopts the quartz pendulum slice of the earth's gravity induction component to solve the object level tilt angle. The built-in 32 bit microprocessor and collocation 32 bit high precision analog-to-digital converter,...
Open the catalog to page 3
SINCE2008 • Expert Of Inertial Attitude Measurement olnclinometer o3D compass oDigital inclinometer oAccelerometer oGyro oNorth finder oINS&IMU
Open the catalog to page 4
SINCE2008 · Expert Of Inertial Attitude Measurement ○Inclinometer ○3D compass ○Digital inclinometer ○Accelerometer ○Gyro ○North finder ○INS&IMU www
Open the catalog to page 5
SINCE2008 • Expert Of Inertial Attitude Measurement ► PRODUCT FUNCTION INTRODUCTION pc c« e ® HANDLE © ON/OFF ® UP © MENU © ENTER © DOWN © REL/ZERO © DATA LOCK ® LCD ® BATTERY COMPARTMENT 1. Aluminum alloy metal handle and shell; 2. ON / OFF button, switch button, press and hold for 3 seconds, the machine will turn on and off after a beep sound; 3. Up button, select button; 4. MENU button, the menu bar display button; 5. ENTER button, confirm to press the button; 6. Down button, select button; 7. REL / ZERO button, absolute zero / relative zero / clear button; 8. HOLD button, data lock...
Open the catalog to page 6
SINCE2008 · Expert Of Inertial Attitude Measurement ▶ OPERATING STEPS 1. Press and hold the power button for three seconds. After the beep, the screen displays the power-on interface, and then enter the product data interface; 2. Press the MENU button once to display the menu bar, then press the SAVE button to enter the save option; 1.DELETE ALL DATA Delete saved data; 2.SAVE THE SINGLE POINT Single save; a. Click OK and select Success. b. Save and click START. The data displayed on the right side of the interface (ten sets of data can be saved) will be saved on the SD card. When ten sets...
Open the catalog to page 7
SINCE2008 · Expert Of Inertial Attitude Measurement 1) AUTO ON/OFF: Auto power off setting Select "power on" to keep the product stay on; select "AUTO POWER OFF (10min)" for 10 minutes automatically power off (the product defaults to this setting) 2) CALI.: Absolute zero calibration setting a. Vertical zero calibration:Place the product vertically on a plane (such as a glass plane), click CALI. To enter the product calibration mode; (as shown in the left figure above), place the product as shown, click OK to start the first point calibration (the product cannot be moved at this time) After...
Open the catalog to page 8
SINCE2008 · Expert Of Inertial Attitude Measurement 1. Click the "Up" button to increase the corresponding digit value 0-9; 2. Click the "Down" button to decrease the corresponding digit value from 0-9; 3. Click the "Right" button and select the corresponding digit to the right. 4. Click OK to save the setting latitude and exit the interface automatically; 5. Click EXIT: to exit the interface (without saving); 4） DATE：Date setting Set the date and time, the time for displaying and saving data; a: Click the "Left" button: select the time of year, month, day, hour, minute, and second, which...
Open the catalog to page 9
SINCE2008 · Expert Of Inertial Attitude Measurement c: Click the "OK" button: Save the current linearity setting; d: Click the "EXIT" button: Exit without saving settings; 4. Data unit mode setting Click the MODE button to switch the product unit mode. As shown in Figure 4-13, the unit mode is "degree" Mode, "degrees, minutes, seconds" mode and "mm / m" Mode; three modes can be switched cyclically. ▶ Product maintenance 1. Digital display angle meter uses two 2A AA batteries. 2. If the power switch is turned on without a digital display, please check whether the battery is charged or...
Open the catalog to page 10
SINCE2008 · Expert Of Inertial Attitude Measurement Add：Block 1, COFCO(FUAN) Robotics Industrial Park , Da Yang Road 90, Fuyong Tel：(86) 755-29657137 (86) 755-29761269 Fax：(86) 755-29123494 E-sales：sales@rion-tech.net Web：www.rion-tech.net 24-hour service：(86)13316995119 ○Inclinometer ○3D compass ○Digital inclinometer ○Accelerometer ○Gyro ○North finder ○I
Open the catalog to page 11All SHENZHEN RION TECHNOLOGY CO. catalogs and technical brochures
-
accelerometer for wind power37 Pages
-
3 AXIS ATTITUDE GYRO RION TL735G18 Pages
-
AH200C MEMS18 Pages
-
RION ACA2000T11 Pages
-
Rion Product Catalog23 Pages
-
TL766D Azimuth Angle Sensor8 Pages
-
3R30-05 3Axis Turntable4 Pages
-
NF601North finder13 Pages
