Catalog excerpts
SCA126T- CANOPEN Type Dual-Axis Inclinometer SPECIFICATIONS Item No.:SCA126T-CANOPEN Description:CANOPEN Type Dual-Axis Inclinometer Production implementation standard reference ● Enterprise quality system standards: ISO9001: 2008 standard (certification number: 128101) ● Tilt sensor production standards: GB / T 191 SJ 20873-2003 inclinometer general specification of Level ● The Academy of metrology and quality inspection Calibrated in accordance to: JJF1119-2004 Electronic Level calibration Specification ● Gyro accelerometer test standard: QJ 2318-92 Gyro accelerometer test methods ● Software development reference standard: GJB 2786A-2009 military software development General requirements ● Product environmental testing standards: GJB150 ● Electromagnetic anti-interference test standards: GB / T 17626 ● Version:Ver.
Open the catalog to page 1SCA126T- CANOPEN Type Dual-Axis Inclinometer General Description SCA126T is a CANOPEN output dual-axis inclinometer launched by RION company to the industrial field control , using industry standard isolated CAN transceiver, built-in high-precision A/D differential converter, by 5 filtering algorithm, which can measure the angle of sensor output relative to the horizontal tilt and pitch tilt. Because of Built in ADI company's high precision digital temperature sensor that can correct the sensor temperature drift in accordance with the changes of the built-in temperature sensor, to ensure...
Open the catalog to page 2SCA126T- CANOPEN Type Dual-Axis Inclinometer Ordering information: Technical Data Parameters *This Technical data only list ± 10 ± 30 °, ± 60 °, + 90 ° series for reference, other measuring range RION TECHNOLOGY sales@rion-tech.net www.rion-tech.net
Open the catalog to page 3SCA126T- CANOPEN Type Dual-Axis Inclinometer please refer to the adjacent parameters Keywords: Resolution: Refers to the sensor in measuring range to detect and identify the smallest changed value. Absolute accuracy: Refers to in the normal temperature circumstances,the sensor absolute linearity, repeatability, hysteresis, zero deviation, and transverse error comprehensive error. Long term stability : Refers to the sensors in normal temperature conditions, the deviation between the maximum and minimum values after a year's long time work. Response time: Refers to the sensor in an angle...
Open the catalog to page 4SCA126T- CANOPEN Type Dual-Axis Inclinometer Measuring Directions&Fix The installation must guarantee the product bottom is parallel to measured face, reduce the influence and of dynamic and acceleration to the sensor. This product can be installed horizontally or mounted vertically (mounted vertically selection is only applicable to the single axis), for installation please refer to the following scheme. Production installation notes: Please follow the correct way to install tilt sensor, incorrect installation can cause measurement errors, with particular attention to the "surface",...
Open the catalog to page 5SCA126T- CANOPEN Type Dual-Axis Inclinometer RION TECHNOLOGY sales@rion-tech.net www.rion-tech.net
Open the catalog to page 6SCA126T- CANOPEN Type Dual-Axis Inclinometer Table 1-4 SDO response message format remark: if controller send CAN-ID=0x600+0x05(default), sended data: 22 00 30 00 10 00 00 00, Transducer return CAN-ID=0x580+0x05 (default), returned data: 60 00 30 00 00 00 00 00, received frame after restarting ID is 0x590(0x580+0x10), the data represent successful modification of frame ID. 4) CAN baud rate setting factory default baud rate is 125K, default node number is (Node_ID)0x05 Table 1-7 SDO request message format The fifth byte time support only 0X32h: 50ms 0X64:100ms facotry default is Table 1-8...
Open the catalog to page 7SCA126T- CANOPEN Type Dual-Axis Inclinometer 6 ) relative zero setting CAN-ID followd by 4 bytes parameter, the former two are forX axis, the later two are forY axis,low bytes at the front, high ones at the behind. Example for angle convert: Angle data of X axis is combined by 16 binary numbers, 8 high numbers are XH, 8 low numbers are XL. Convert the above 16 binary numbers into decimal numbers and divided by 100, then the result is angle data. 0-0x23328 signify 0~90 degree, positive angle 0XFFFF-0XDCD7 signify 0~-90 degree, negative angle RION TECHNOLOGY sales@rion-tech.net...
Open the catalog to page 8SCA126T- CANOPEN Type Dual-Axis Inclinometer Eg: 285 13 35 1DFF ^More information please visit Rion’s company website :www.rion-tech.net RfON TECHNOLOGY sales@ rion-tech.net www.rion-tech.net
Open the catalog to page 9CHINA SHENZHEN RION TECHNOLOGY CO.,LTD.
Open the catalog to page 10All SHENZHEN RION TECHNOLOGY CO. catalogs and technical brochures
-
accelerometer for wind power
37 Pages
-
3 AXIS ATTITUDE GYRO RION TL735G
18 Pages
-
AH200C MEMS
18 Pages
-
RION ACA2000T
11 Pages
-
Rion Product Catalog
23 Pages
-
TL766D Azimuth Angle Sensor
8 Pages
-
3R30-05 3Axis Turntable
4 Pages
-
NF601North finder
13 Pages