Website:
SHENZHEN RION TECHNOLOGY CO.,LTD
Catalog excerpts
DMI900-Super High Precision Digital Inclinometer SPECIFICATIONS Item No.：DMI900 Desc.：Super High Precision Digital Inclinometer Production implementation standard reference ● Enterprise quality system standards: ISO9001: 2008 standard (certification number: 128101) ● Tilt sensor production standards: GB / T 191 SJ 20873-2003 inclinometer general specification of Level ●The Academy of metrology and quality inspection Calibrated in accordance to: JJF1119-2004 Electronic Level calibration Specification ● Software development reference standard: GJB 2786A-2009 military software development General requirements ● Product environmental testing standards: GJB150 ● Electromagnetic anti-interference test standards: GB / T 17626 ● Version:Ver.1 ● Revisio
Open the catalog to page 1
DMI900-Super High Precision Digital Inclinometer DMi900 is one Single axis Digital Inclinometer developed by RION company based on high precise angle measurement platform, it adopts the quartz pendulum slice of the earth's gravity induction component to solve the object level tilt angle. The built-in 32 bit microprocessor and collocation 32 bit high precision analog-to-digital converter, can highly subdivision sampling for the front weak current current and signal ratio of inclination , can meet the highest level accuracy of 0.001 degrees, the resolution is up to 0.0002 degrees. With...
Open the catalog to page 2
DMI900-Super High Precision Digital InclinometerTechnical Data Parameter
Open the catalog to page 3
DMI900-Super High Precision Digital Inclinometer
Open the catalog to page 4
High Precision Bubble handle -* Reset hole Charging indication - ON / OFF button - HOLD * MENU Ch argi n q/Corn m u n i cation port * Display area -* V type test tank ON/OFF: Press for 2seconds to power on or off; HOLD: This key to lock the current data, convenient customer records; MENU: Press MENU menu disappears, then re-press appears.,, RESET HOLE: If the instrument occur a crash in working, key can't operation, can use the needlepoint hard object to insert into the hole for touch the button; CHARGING /COMMUNICATION PORT: For charging purposes or USB1.1 protocol output...
Open the catalog to page 5
©Click the SAVE button to enter the touch screen save option B. SAVE THE SINGLE POINT C. SAVE MULTIPLE POINT (Saved frequency selectable 1, 5, 10, 20) D. Click “OK “to choose “success” E. EXIT Give up selection to keep the original Select “save the single point” to enter into interface Save then click START .Saved the related data in SD card, and display at the right corner of the interface , Right corner of the six sets of data can be displayed, and then refresh ABS/ZERO Switch keys EIXT: Exit saving function SETTING SELECT ALARM CALI. DATE LATITUDE; AUTO OFF/ON EXIT Click the SET button...
Open the catalog to page 6
DMI900-Super High Precision Digital Inclinometer 1. Click ON / OFF and open the angle alarm setting, display numbers, closed setting then shows "------." 2. Click on the X or Y axis data point select the appropriate axis angle setting. 3. Click the up: Changing the corresponding bits of data and symbols. Left: Change the corresponding bit of the direction keys. Angle symbol is +: When the angle is greater than the corresponding alarm -: When the angle is less than the corresponding alarm + / -: Outside this range alarm For example: Set X: +03.00 means when the X axis angle +3.3, is greater...
Open the catalog to page 7
Setting local latitude value, because the earth's gravity field around the different, customers only need to set the local latitude, product automatic computing local gravity field, correct the accuracy error.. 1. Click on the "up" button to increase the corresponding bit number 0-9 2. Click on the "down" button to reduce the corresponding numerical 0-9 3. Click on the "right" button to the right to choose corresponding 10 bits, very, percentile, cycle 4. Click OK to save the Settings of latitude. 5. Click the EXIT: quit setup As shown in figure: 2-13, select "power on" product in keep...
Open the catalog to page 8
DMI900-Super High Precision Digital Inclinometer ©Unit mode selection MODE press each time to display unit mode change DEG, degree,minutes and seconds, mm/m switching cycles ©ZERO/ABS : Absolute Relative ZERO: click to set the current angle to ZERO ABS: click on the switch to absolute zero ©When crashing to restart with needle to press the holes under the lamp to reset ©Charging and upload the SD card to access the data using the software to store data Product software interface Parameter area: Open/Close: Open/Close COM port; Set the area: Set Zero: Set the reset button. Cancel Zero: clear...
Open the catalog to page 9
DMI900-Super High Precision Digital Inclinometer Products maintenance 1. The digital display angle instrument using 3.7 V rechargeable lithium battery, in order to improve the battery life, please recharge when the battery not completely to be used out. 2. Press power ON without digital display, please recharge in time. 3. The instrument reliability and can be used in the vibration environment, please don’t high-altitude fall the instrument to avoid cause permanent damage. 4. If found instrument damage please don’t disassemble it by yourself, please contact us at first for professional...
Open the catalog to page 10
CHINA SHENZHEN RION TECHNOLOGY CO.,LTD. •INCLINOMETER -TILT SWITCH -ACCESSORIES -NORTH FINDER -TURNTABLE •ELECTRONIC COMPASS -DIGITAL INCLINOMETER -ACCELEROMETER •ATTITUDE AND HEADING REFERENCE SYSTEM -ELECTRONIC GYROSCOPE T : (86) 755-29657137 F : (86) 755-29123494 W : www.riontech.cn E : sales@rion-tech.net A: Block 1, COFCO(FUAN) Robotics Industrial Park . Da Yang Road 90, Fuyong Distict, Shenzhen City, China
Open the catalog to page 11All SHENZHEN RION TECHNOLOGY CO. catalogs and technical brochures
-
accelerometer for wind power37 Pages
-
3 AXIS ATTITUDE GYRO RION TL735G18 Pages
-
AH200C MEMS18 Pages
-
RION ACA2000T11 Pages
-
Rion Product Catalog23 Pages
-
TL766D Azimuth Angle Sensor8 Pages
-
3R30-05 3Axis Turntable4 Pages
-
NF601North finder13 Pages
