PS-VOC-E Air Quality Module Operation Manual

PS-VOC-E Air Quality Module Brief Introduction PS-VOC-E air quality module, works on the proven fuel cell technology, combines solid electrolyte with noble metal catalyst, converting VOC content into PPM directly. Once VOC arrives at working electrode (anode) it is oxidized instantaneously to generate an electrical signal. The electrical signal is then acquired and processed by microprocessor into a PPM value and is output by standard digital signal. PS-VOC-E is pre-calibrated in the factory and can be integrated into your system directly. Key Features High stability Good consistency Long service...

PS-VOC-E Air Quality Module Technical Specification MODEL Module makes use of serial communication. Communication configuration parameters are:

6 PS-VOC-E Air Quality Module Baud rate

PS-VOC-E Air Quality Module PS-VOC-E Air Quality Module Gas concentration = concentration (high byte)*256 + concentration (low byte) ‘Function name: unsigned char FucCheckSum(uchar*i,ucharln) ‘Function description: checksum calibration[Take Not(Byte1+Byte2+...Byte7) +1] > Avoid changing or moving sensor on the module. > Avoid moving or changing electronic elements on PCB. > Avoid exposure to organic vapour, organic solvents high gas concentration. > Protect from excessive vibration and shock. Add: Building4, Lianjian S&T Park, LonghuaDistrict,Shenzhen,China; Tel: +86 755 3669 0079 Mobile: +8613510916915...