PS-DJY-100 Electrolyte Module

Product catalog summary

Brief Introduction: The PS-DJY-100 Electrolyte Module utilizes fuel cell technology to convert electrolyte content into PPM values. It is pre-calibrated and ready for integration into systems, providing high stability, consistency, and a long service life without the need for baseline correction or periodic calibration.

Key Features and Applications: The module is suitable for use in Li Battery factories, charging stations, warehouses, energy storage systems, and electrical vehicles. It boasts strong anti-poisoning ability and does not require frequent calibration.

Definition of Pins: The module has four pins: Vin (5V), GND, RXD (data input), and TXD (data output).

Technical Specifications: The module operates on a micro fuel cell detection principle with a range of 0-100ppm and an overload capacity of 200ppm. It requires an input voltage of 4.5-7V, has a warm-up time of less than 3 minutes, and a response time of less than 180 seconds. It functions within a temperature range of -40℃ to 60℃ and a humidity range of 10%-90% RH. The module has a lifetime of 3 years and a warranty period of 12 months.

Communication Protocol: The module uses serial communication with a baud rate of 9600, 8 data bits, 1 stop bit, and no parity bit. It supports active upload and Q&A communication types, with commands provided for switching modes and reading gas concentration.

Checksum Calibration: A function is provided for checksum calibration to ensure data integrity.

Notes: Users are advised to avoid altering the sensor or electronic components, and to protect the module from organic vapors, solvents, high gas concentrations, excessive vibration, and shock.

Contact Information: ProSense Technologies Co., Ltd. is located in Shenzhen, China. Contact details include phone numbers and an email address for sales inquiries.

Catalog excerpts

Brief Introduction PS-DJY-100 electrolyte module, works on the proven fuel cell technology, combines fuel cell technology with precise electronic technique, converting the electrolyte content into PPM directly. Once electrolyte arrives at working electrode (anode) it is oxidized instantaneously to generate an electrical signal. The electrical signal is then acquired and processed by microprocessor into a PPM value and is output by standard digital signal. PS-DJY-100 is pre-calibrated in the factory and can be integrated into your system directly. Typical Applicant Factory for Li Battery Charging...

Open the catalog to page 2

Technical Specification A\ MODEL Module makes use of serial communication. Communication configuration parameters are:

Open the catalog to page 3

There are two communication types: active upload type and Q&A type. The default type is active upload and it sends gas concentration once every second. Commands are as follow: Gas concentration = concentration (high byte)*256 + concentration (low byte)

Open the catalog to page 4

‘Function name: unsigned char FucCheckSum(uchar*i,ucharln) ‘Function description: checksum calibration[Take Not(Byte1+Byte2+...Byte7) +1] ‘Note: Take Not(Byte1+Byte2+...ByteX (X>2) unsigned char FucCheckSum(unsigned char *i, unsigned char In) > Avoid exposure to organic vapour, organic solvents high gas concentration. > Protect from excessive vibration and shock. ProSense Technologies Co., Ltd. Add: Building4, Lianjian S&T Park, LonghuaDistrict,Shenzhen,China; Tel: +86 755 3669 0079 Mobile: +8613510916915 Email: salcs t7 szproscnsc.com Website:www. szprosense.com

Open the catalog to page 5

All ShenZhen ProSense Technologies Co., Ltd. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list