DGR Electric Cylinder Series Introduction Economical Electric Cylinder (DGREC) 1. The cylinder body is made of aluminum alloy, which is of light weight, simple yet beautiful. 2. The cylinder is equipped with anti-rotation mechanism, which does not need to be matched with the piston rod, and the user can use it directly. 3. With famous branded ball screw and bearing products, it is suitable for light duty output, highly cost-effective. 4. Embedded with magnetic limit sensor switches. Light Duty Electric Cylinder (DGRLT) 1. Dayton aluminum alloy 6431 standard square cylinder is used as the cylinder body, with refined surface treatment. 2. It is equipped with anti-rotation mechanism inside, no need to match the piston rod, the user can use it directly (or without the anti-rotation mechanism, it can be fully customized). 3. High speed, quiet motion. 4. Embedded with magnetic limit sensor switches. Standard Electric Cylinder (DGRST) 1. Robust aluminum alloy is used for the cylinder body, enables large thrust and fast speed. 2. It is equipped with anti-rotation mechanism inside, no need to match the piston rod, the user can use it directly. 3. High precision, repeatable positioning accuracy can reach ±0.01mm with servo control system; 4. Embedded with magnetic limit sensor switches. Heavy Duty Electric Cylinder (DGRHT) 1. The cylinder body is made of round high strength carbon steel, the thrust is extremely large, and the maximum rated load can reach 20 tons; 2. The cylinder is equipped with anti-rotation mechanism, no need to match the piston rod, the user can use it directly. 3. Using Inductive displacement sensor; Excellence & Innovation