- Catalogs
- Shenzhen Milvent Technology Co.,Ltd
- SUS Material M18x1.5 Breather Vent Plug
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
SUS Material M18x1.5 Breather Vent Plug
1 / 1 PageView full catalog
SUS Material M18x1.5 Breather Vent Plug
Product catalog summary
Product Overview:
The MIV-18SUS Vent Plug is designed to maintain high airflow in large outdoor enclosures, equalizing pressure and reducing condensation by allowing air to flow freely. Its simple and flat design is compatible with any type of enclosure.
Specifications:
Components and Materials:
Installation Recommendations:
Environmental Performance:
Technical Data:
The MIV-18SUS Vent Plug is designed to maintain high airflow in large outdoor enclosures, equalizing pressure and reducing condensation by allowing air to flow freely. Its simple and flat design is compatible with any type of enclosure.
Specifications:
- IP68 protection class, suitable for immersion up to 2 meters for 60 minutes.
- Operating temperature range from -40°C to +125°C.
- Compliant with 2Ex n RIIC T6 GcX standards.
- Recommended installation on the side face of enclosures for optimal outdoor use.
Components and Materials:
- Housing: SUS
- Membrane: PTFE
- Gasket: Silicone
- Lock nut: N/A
- Thread size: M18x1.5
- Mount hole: Φ18.5
- Sales unit: 100PCS
Installation Recommendations:
- Recommended torque: 2Nm
- Application wall thickness should be <=3mm. If >3mm and threaded, nuts are not required.
Environmental Performance:
- Protection class: IP66, IP67, IP68, IP69K
- Heat resistance: -40°C to +125°C (IEC60068-2-1,2,14)
- Humidity testing: 85°C, 85% humidity for 1000 hours (IEC600-2-78)
- Solar industry testing: Humidity freeze, high temperature, hail impact test (IEC62108.10.8.9)
Technical Data:
- Typical airflow: 2L/min at dp=70mbar
- Water entry pressure: >0.3bar for 30 seconds
See more
Catalog excerpts
www.milvent.com [email protected] MIV SERIES ->Maintain high airflow in large outdoor enclosure. ->Equalize pressure and reduce condensation by allowing air to flow freely into and out of sealed large enclosures. ->Simple and flat design meets any type of enclosures. ->IP68 protection class(2meters/60min.) and -40° C to +125° C operating temp.range.Best to use under the tough environment. ->Compliant with 2Ex n RIIC T6 GcX -installing on the side face of enclosures is effective for outdoor use. % Application wall thickness is <=3mm , Recommend using nuts if >3mm and have thread on the housing, not need nuts. Technical Data Part no./Components Part no.
Open the catalog to page 1All Shenzhen Milvent Technology Co.,Ltd catalogs and technical brochures
PG7 Black Vent Plug1 Page
MILVENT ONE WAY VALVE1 Page
metal cable gland4 Pages
Headlamp Cap Vent1 Page
Metal Dual Vent1 Page
Milvent Catalog 202053 Pages
milvent catalog53 Pages
Breather Drian Plug2 Pages
MIV Series1 Page
MIL Series1 Page
Plastic Cable Gland1 Page
Metal Cable Gland1 Page
Related Searches
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.