*mydirectindustry

Catalogs
Shenzhen Milvent Technology Co.,Ltd
Milvent Parts for ventilators for our health service

Milvent Parts for ventilators for our health service

Product catalog summary

Overview: The document provides technical specifications for Milvent M12x1.5 Breather Plugs, detailing color options, part numbers, dimensions, performance characteristics, and environmental capabilities.

Color and Codes: The breather plugs are available in three colors: Light Grey, Black (B), and Basalt Grey (BG).

Lock Nut Assembly Dimensions: The document lists various part numbers (MIV-12, MIV-12HA, MIV-12UHA, MIV-1210, MIV-1215, MIV-12LA, MIV-12K) with corresponding thread types and specifications.

Performance Specifications:

Typical airflow ranges from 450 ml/min to 4000 ml/min at a pressure differential of 70 mbar.
Water entry pressure is specified at 0.3 to 0.6 bar for 30 seconds, with IP69K rating for some models.
Head height is 5mm, and the recommended torque is 0.7Nm.

Material Composition: The body is made of PA6+PTFE+SILICONE, and lock nuts are made of PA6.

Environmental Performance: The plugs are rated IP66, IP67, IP68 (immersion up to 2 meters for 60 minutes), and IP69K. They operate effectively in temperatures ranging from -40°C to +125°C and can withstand 85% humidity for 1000 hours.

Performance Features:

Blocks ingress of contaminants such as rain, insects, dirt, dust, and sand.
Diffuses water vapor through a microporous membrane.
Designed for tough environments with a simple and flat design suitable for various enclosures.
Effective for outdoor use when installed on the side face of enclosures.

Catalog excerpts

Milvent Parts for ventilators for our health service-1

Datesheet of Milvent M12x1.5 Breather Plugs Actual Picture Actual Application Performance: ->Block ingress of wide range of contaminants,from rain and insects to dirt,dust,sand and other particulates, ->can diffuse water vapor molecules the microporous membrane ->IP 68 protection class(2 meters/60 min.) and -40°C to +125°C Three Color and code ->operating temp.range.Best to use under the tough environment. ->Simple and flat design meets any type of enclosures. Light Grey ->Installing on the side face of enclosures is effective for outdoor use. Basalt Grey Part No. Thread Type Aassembly Dimensions Water entry pressure bar/30sec Recommended torque Body:PA6+PTFE+SILICONE ;Lock Nuts:PA6; (Lock Nuts Part no.:MIV-12NUT Enviromental performance IP66.IP67.IP68(Immersion:2meters/60min.)IP69K -40°C~+125°C 85°.85%humidity-1000 hours Humidity freeze-High temperature,Hail impact test. 94

Open the catalog to page 1

All Shenzhen Milvent Technology Co.,Ltd catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list