Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Shenzhen Milvent Technology Co.,Ltd
  3. metal burst vent for battery pack
video corpo

metal burst vent for battery pack

metal burst vent for battery pack
1 / 1 PageView full catalog

metal burst vent for battery pack

Product catalog summary
Technical Specifications
  • Typical Airflow: 2.96 liters per minute at a differential pressure of 10 kPa.
  • Burst Pressure: Less than 35 kPa.
  • Degassing/Venting Airflow: 20 liters per second at 300 mbar.
Environmental Performance
  • Protection Class: IP67 according to IEC529, 2nd edition.
  • Heat Resistance: Operates between -40°C and +125°C as per IEC60068-2-1,2,14.
  • Humidity Testing: 85°C at 85% humidity for 1000 hours, including humidity freeze and high temperature, hail impact test as per IEC600-2-78.
Components and Materials
  • Part Number: MIV-40MSUSEX
  • Material: SUS304 for housing, Micro Membrane, Silicone O-ring.
  • Color: Silver
  • Mount Hole: 40mm
MIL SERIES Ventilation Parts
  • Designed for maintaining high airflow in large battery packs and enclosures.
  • Equalizes pressure and reduces condensation by allowing free airflow.
  • Features a simple and flat design suitable for various enclosures.
  • Offers IP68 protection (2 meters for 60 minutes) and operates in temperatures ranging from -40°C to +125°C.
  • Effective for outdoor use when installed on the side or top face of enclosures.
See more

Catalog excerpts

metal burst vent for battery pack-1

www.milvent.com [email protected] Ventilation Parts MilventMIL SERIES Metal m40x1.5 Burst Battery Pack Vent Plug ->Maintain high airflow in large battery main pack and open ->Equalize pressure and reduce condensation by allowing air to flow freely into and out of sealed large enclosures. ->Simple and flat design meets any type of enclosures. ->IP68 protection class(2meters/60min.) and -40° C to +125° C operating temp.range.Best to use under the tough environment. -installing on the side/top face of enclosures is effective for outdoor use. Technical Data Typical airflow

 Open the catalog to page 1

All Shenzhen Milvent Technology Co.,Ltd catalogs and technical brochures

  1. Fire Arrestor Vent for battery pack
    Fire Arrestor Vent for battery pack

    2  Pages

  2. Catalog of Battery Pack Vents Valve
    Catalog of Battery Pack Vents Valve

    8  Pages

  3. one way drain plug IP67 Milvent Ventilation M12x1.5 Plastic Drain Plug with nut
    one way drain plug IP67 Milvent Ventilation M12x1.5 Plastic Drain Plug with nut

    1  Page

  4. M40x1.5 Battery Pack Vent Valve
    M40x1.5 Battery Pack Vent Valve

    1  Page

  5. Milvent Battery Pack Vent Valve Series
    Milvent Battery Pack Vent Valve Series

    12  Pages

  6. PG7 Black Vent Plug
    PG7 Black Vent Plug

    1  Page

  7. MILVENT ONE WAY VALVE
    MILVENT ONE WAY VALVE

    1  Page

  8. TA238-R Two Way Breather Valve for Outdoor Container
    TA238-R Two Way Breather Valve for Outdoor Container

    1  Page

  9. MIV-SNAP-6.35 Snap In Vents
    MIV-SNAP-6.35 Snap In Vents

    1  Page

  10. MIV-SNAP-16 Snap In Vents Snap Fit Type Waterproof Breather Ventilation Plug
    MIV-SNAP-16 Snap In Vents Snap Fit Type Waterproof Breather Ventilation Plug

    1  Page

  11. M40 Battery Pack Vent Valve Breather Pressure Relief Pressure Difference Waterproof Ventilation Plug
    M40 Battery Pack Vent Valve Breather Pressure Relief Pressure Difference Waterproof Ventilation Plug

    1  Page

  12. Snap In Vent Breather Ventilation Pressure Relief Valve for 10mm hole
    Snap In Vent Breather Ventilation Pressure Relief Valve for 10mm hole

    1  Page

  13. M25 Type Battery Pack Vent Valve
    M25 Type Battery Pack Vent Valve

    1  Page

  14. New type metal Battery Pack Vent Valve with Inner Screw Assembly
    New type metal Battery Pack Vent Valve with Inner Screw Assembly

    1  Page

  15. metal cable gland
    metal cable gland

    4  Pages

  16. Humidity Control Indicator Vent Valve
    Humidity Control Indicator Vent Valve

    1  Page

  17. Turn Bayonet Burst Battery Pack Vent Plug datasheet
    Turn Bayonet Burst Battery Pack Vent Plug datasheet

    1  Page

  18. Milvent Supra Rubber Fit Vents
    Milvent Supra Rubber Fit Vents

    1  Page

  19. Milvent Protective Vent m6x0.75 with Chamfer for o-ring metal MIV-06MB-0.75-7-C-
    Milvent Protective Vent m6x0.75 with Chamfer for o-ring metal MIV-06MB-0.75-7-C-

    1  Page

  20. M10x1.5 PTFE VENT PLUG for Engine Star Battery Pack
    M10x1.5 PTFE VENT PLUG for Engine Star Battery Pack

    1  Page

  21. 2way Vent Valve M25x1.5 for Gearbox Robots or oil contacting tank or Enclosure
    2way Vent Valve M25x1.5 for Gearbox Robots or oil contacting tank or Enclosure

    1  Page

  22. Explosion Proof Valve for Battery Pack or Pump
    Explosion Proof Valve for Battery Pack or Pump

    1  Page

  23. Tiny Metal Pressure Differential Release Breather Vent Plug
    Tiny Metal Pressure Differential Release Breather Vent Plug

    1  Page

  24. Headlamp Cap Vent
    Headlamp Cap Vent

    1  Page

  25. Ventilation Cable Gland M20
    Ventilation Cable Gland M20

    1  Page

  26. Low Pressure Relief Valve For Gearbox or Motor
    Low Pressure Relief Valve For Gearbox or Motor

    1  Page

  27. Rubber Fit Vent Plug Breather Protective Valve
    Rubber Fit Vent Plug Breather Protective Valve

    1  Page

  28. m8x1.25 metal one driver screw in vents plug
    m8x1.25 metal one driver screw in vents plug

    1  Page

  29. Milvent Prevent Liquid Leak Vent
    Milvent Prevent Liquid Leak Vent

    1  Page

  30. Venting Parts for EV Battery Pack
    Venting Parts for EV Battery Pack

    1  Page

  31. Metal Dual Vent
    Metal Dual Vent

    1  Page

  32. Milvent Dual Vent M16x1.5
    Milvent Dual Vent M16x1.5

    1  Page

  33. Milvent Drian Plug Snap In Type
    Milvent Drian Plug Snap In Type

    1  Page

  34. Milvent Drain Plug for outdoor enclosure,Drain Our Condensation
    Milvent Drain Plug for outdoor enclosure,Drain Our Condensation

    1  Page

  35. One Vent Hole Type Air Vent Cable Gland
    One Vent Hole Type Air Vent Cable Gland

    1  Page

  36. Rubber Fit Vent for 12mm Hole
    Rubber Fit Vent for 12mm Hole

    3  Pages

  37. M40 breather with valve for EV battery pack
    M40 breather with valve for EV battery pack

    2  Pages

  38. M20 breather with valve for EV battery pack,powertrain,or gearbox
    M20 breather with valve for EV battery pack,powertrain,or gearbox

    1  Page

  39. IP68 Rubber Fit Pressure Relief Vent Plug
    IP68 Rubber Fit Pressure Relief Vent Plug

    1  Page

  40. metal battery pack vents for 2~20L battery pack
    metal battery pack vents for 2~20L battery pack

    5  Pages

  41. Milvent Battery Pack Vents Simulation Testing Report
    Milvent Battery Pack Vents Simulation Testing Report

    5  Pages

  42. Milvent Vent with Valve for Battery Pack EV
    Milvent Vent with Valve for Battery Pack EV

    1  Page

  43. New tiny pressure release vent M3, M4
    New tiny pressure release vent M3, M4

    1  Page

  44. Milvent Catalog 2020
    Milvent Catalog 2020

    53  Pages

  45. M32 Conduit Fitting for hose 34.5MM
    M32 Conduit Fitting for hose 34.5MM

    1  Page

  46. 1 INCH Straight Conduit Fitting for AD34.5 HOSE
    1 INCH Straight Conduit Fitting for AD34.5 HOSE

    1  Page

  47. M25 Conduit Fitting For HOSE AD28.5
    M25 Conduit Fitting For HOSE AD28.5

    1  Page

  48. milvent catalog
    milvent catalog

    53  Pages

  49. Milvent Parts for ventilators for our health service
    Milvent Parts for ventilators for our health service

    1  Page

  50. Milvent Plastic Breather Plugs Metric Type M3 to M40
    Milvent Plastic Breather Plugs Metric Type M3 to M40

    1  Page

  51. Breather Drian Plug
    Breather Drian Plug

    2  Pages

  52. MIV Series
    MIV Series

    1  Page

  53. MIL Series
    MIL Series

    1  Page

  54. STAINLESS STEEL CABLE GLAND / BRASS / EMC-SHIELDED / STRAIGHT
    STAINLESS STEEL CABLE GLAND / BRASS / EMC-SHIELDED / STRAIGHT

    1  Page

  55. pg series cable gland datasheet
    pg series cable gland datasheet

    1  Page

  56. M20x1.5 Long Thread Type Vent Plug
    M20x1.5 Long Thread Type Vent Plug

    1  Page

  57. Metal Ventilation Cable Gland
    Metal Ventilation Cable Gland

    1  Page

  58. NEW ENERGY VEHICLE Battery Pack Ex-Proof Venting SOLUTIONS
    NEW ENERGY VEHICLE Battery Pack Ex-Proof Venting SOLUTIONS

    7  Pages

  59. SUS Material M18x1.5 Breather Vent Plug
    SUS Material M18x1.5 Breather Vent Plug

    1  Page

  60. SUS Material M40x1.5 Breather Vent Plug
    SUS Material M40x1.5 Breather Vent Plug

    1  Page

  61. Plastic Cable Gland
    Plastic Cable Gland

    1  Page

  62. Metal Cable Gland
    Metal Cable Gland

    1  Page

  63. Metal Blind Cap Vent Plug
    Metal Blind Cap Vent Plug

    1  Page

  64. Black Waterproof Breather Sticker Vents
    Black Waterproof Breather Sticker Vents

    4  Pages

  65. Ventilation Cable Gland Plastic Screw In Type
    Ventilation Cable Gland Plastic Screw In Type

    1  Page

  66. Waterproof Breather Vent Plug M16x1.5
    Waterproof Breather Vent Plug M16x1.5

    1  Page

  67. Waterproof Breather Vent Plug M20x1.5
    Waterproof Breather Vent Plug M20x1.5

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.