Specifications:
The HVB1 Ceramics High Energy Resistor is designed with a compact, non-flammable, and insulated structure. It offers stable long life and low inductance, meeting EU-RoHS standards. The resistor is constructed using SiO2 materials, tinned copper lead wire, a ceramic shell, a high energy resistor core, and a tinned iron cap.

Dimensions:
The HVB1 type has a power rating of 10W with dimensions of L±1.5mm, H±1mm, C±3mm, and d±0.05mm. The specific dimensions are 75.0mm in length, 18.0mm in height, and 35.0mm in width.

Electrical Characteristics:
The resistor has a rated power of 10W, a resistance range of 10Ω to 50KΩ, a maximum working voltage of 2000V, and a maximum overload voltage of 30KV. The temperature coefficient of resistance (T.C.R) is -800±300PPM/℃ for resistances below 100Ω and -1200±300PPM/℃ for resistances above 100Ω.

Performance Standards:
The product adheres to JIS C 5201-1 and IEC60115-1 standards. It is tested for resistance, T.C.R, voltage coefficient, overload, pulse resistance, soldering heat resistance, rapid temperature change, moisture resistance, load life, high temperature exposure, and solvent resistance.

Ordering Information:
An example of ordering is HVB1 10 K 100 A, where HVB1 is the type, 10 is the rated power, K±10% is the tolerance, and 100R0=100R is the resistance.

Test Methods and Requirements:
Resistance is measured at different voltages depending on the resistance range. The resistor is subjected to high voltage impulse tests, temperature cycling, and moisture resistance tests. Performance requirements include maintaining resistance within specified tolerances and no abnormalities in appearance.