L503 series Heavy duty keylocking threaded lnserts, keylocking threaded inserts are used to quickly repair stripped,damaged or worn out threads with new stronger threads or for use in original equipment.
1Pages

Add to favorites

{{requestButtons}}

All Shenzhen In-saiL Precision Parts Co. catalogs and technical brochures

1. 

   DIN1478

   1 Pages

2. 

   DIN1441

   1 Pages

3. 

   DIN1440

   1 Pages

4. 

   DIN976

   1 Pages

5. 

   DIN975

   1 Pages

6. 

   DIN917

   1 Pages

7. 

   DIN916

   1 Pages

8. 

   DIN915

   1 Pages

9. 

   DIN914

   1 Pages

10. 

    DIN792

    1 Pages

11. 

    DIN741

    1 Pages

12. 

    DIN662

    1 Pages

13. 

    DIN661

    1 Pages

14. 

    DIN548

    1 Pages

15. 

    DIN525

    1 Pages

16. 

    DIN508

    1 Pages

17. 

    DIN436

    1 Pages

18. 

    DIN434

    1 Pages

19. 

    DIN432

    1 Pages

20. 

    DIN431

    1 Pages

21. 

    DIN427

    1 Pages

22. 

    DIN417

    1 Pages

23. 

    DIN440

    1 Pages

24. 

    DIN319

    1 Pages

25. 

    DIN261

    1 Pages

26. 

    DIN188

    1 Pages

27. 

    DIN186

    1 Pages

28. 

    DIN127

    1 Pages

29. 

    DIN126

    1 Pages

30. 

    DIN982

    1 Pages

31. 

    DIN986

    1 Pages

32. 

    DIN985

    1 Pages

33. 

    DIN977

    1 Pages

34. 

    DIN967

    1 Pages

35. 

    DIN555

    1 Pages

36. 

    DIN1142

    1 Pages

37. 

    DIN93

    1 Pages

38. 

    DIN96

    1 Pages

39. 

    DIN97

    1 Pages

40. 

    DIN128

    1 Pages

41. 

    DIN134

    1 Pages

42. 

    DIN316

    1 Pages

43. 

    DIN466

    1 Pages

44. 

    DIN983

    1 Pages

45. 

    DIN984

    1 Pages

46. 

    DIN988

    1 Pages

47. 

    DIN1479

    1 Pages

48. 

    DIN1481

    1 Pages

49. 

    DIN1477

    1 Pages

50. 

    DIN1475

    1 Pages

51. 

    DIN1474

    1 Pages

52. 

    DIN1473

    1 Pages

53. 

    DIN1472

    1 Pages

54. 

    DIN1471

    1 Pages

55. 

    DIN1469

    1 Pages

56. 

    DIN1445

    1 Pages

57. 

    DIN94

    1 Pages

58. 

    DIN7

    1 Pages

59. 

    DIN1

    1 Pages

60. 

    LFPXA-M8

    1 Pages

61. 

    LPXAN-M5

    1 Pages

62. 

    LGLPN-6

    1 Pages

63. 

    LSPPL-M6

    1 Pages

64. 

    LJJPPN-M2

    1 Pages

65. 

    LMPFLT-1. 5

    1 Pages

66. 

    LMPFS-1. 5

    1 Pages

67. 

    LMPFL-1. 5

    1 Pages

68. 

    LPJSB-10

    1 Pages

69. 

    LPJLTP-M12

    1 Pages

70. 

    LSPJY-M3

    1 Pages

71. 

    LSPJS-M3

    1 Pages

72. 

    LFPJL-M3

    1 Pages

73. 

    LPJHZ-M10

    1 Pages

74. 

    LPJLF-M5

    1 Pages

75. 

    LPJLR-M10

    1 Pages

76. 

    LPJLH-M8

    1 Pages

77. 

    LPJLSW-M3

    1 Pages

78. 

    LPJS-M3

    1 Pages

79. 

    LRBPJ-9

    1 Pages

80. 

    LTBPJ-1

    1 Pages

81. 

    LCBPJ-9

    1 Pages

82. 

    LPFPR-7

    1 Pages

83. 

    LPFSSN-3

    1 Pages

84. 

    LTBBT-M4 series

    1 Pages

85. 

    LBBT-6 series

    1 Pages

86. 

    LBPJG series

    1 Pages

87. 

    LC-BPE series

    1 Pages

88. 

    LBP series

    1 Pages

89. 

    LFBPJ series

    1 Pages

90. 

    LBSSLS-M3

    1 Pages

91. 

    L Selectable Long

    1 Pages

92. 

    LBMSL-M3 series

    1 Pages

93. 

    Long Series

    1 Pages

94. 

    LBPK-M3

    1 Pages

95. 

    LBMJ series

    1 Pages

96. 

    LBSN-M6 series

    1 Pages

97. 

    LPCF-M8 series

    1 Pages

98. 

    LBPR-M5 series

    1 Pages

99. 

    LBS-M3 series

    1 Pages

100. 

     LBPY-M3

     1 Pages

101. 

     LBP-M3 series

     1 Pages

102. 

     LSMTSO surface mount standoffs.

     1 Pages

103. 

     LKSSB Broaching standoffs feature a spring action to holdPC board securely without screws or threaded hardware.

     1 Pages

104. 

     LKFE Broaching standoffs, threaded or unthreaded forstacking or spacing.

     1 Pages

105. 

     LKF2 Broaching standoffs, threaded or unthreaded formounting on PC boards.

     1 Pages

106. 

     LSKC-F These type allow detachable joining of two sheets.

     1 Pages

107. 

     LSFW series Type LSFW is specially designed to allow pivoting oftwo sheets of metal.A wave washer provides theconsistent torsion to allow repeatable rotation.

     1 Pages

108. 

     LSPF series Type LSFP fasteners are made from precipitationhardened stainless steel for installation into stainlesssteel sheets where corrosion resistance may be required.

     1 Pages

109. 

     LSF series TypeLSF for permanent joining of two metalsheets.

     1 Pages

110. 

     LCS series Stainless steel standoffs

     1 Pages

111. 

     LSKC series Useing PC board or other parts slide into placequickly, playing a role interval.

     1 Pages

112. 

     LSS series lnterval PC board with other board or metal plate,simply press the button on the plate cylinder toensure correct needed spacing for both.

     1 Pages

113. 

     LDSO series Threaded standoffs for close-to-edge applications.

     1 Pages

114. 

     power elements

     50 Pages

115. 

     PE33

     1 Pages

116. 

     IT-TRB PE02

     1 Pages

117. 

     LTSO series Threaded standoffs for sheet as thin as .025”/0.63mm.

     1 Pages

118. 

     LBSO4 series Blind threaded for installation into stainless steelsheets as thin as .040”/ 1.02 mm.

     1 Pages

119. 

     LBSO series Blind bolts with effect from the gauge or fixed to thechassis or circuit board.

     1 Pages

120. 

     LSO series Thru-hole non-threaded can be effected thespacing.

     1 Pages

121. 

     LSO4 series Thru-hole threaded for installation into stainlesssteel sheets as thin as .040”/1.02 mm.

     1 Pages

122. 

     LSO series Thru-hole bolts with effect from the gauge or fixed tothe chassis or circuit board.

     1 Pages

123. 

     LTPS series，LTPS satisfy a wide range of positioning, pivot, andalignment applications.

     1 Pages

124. 

     LTFH/LTFHS series Non-flush for sheets as thin as .020”/0.51 mm.

     1 Pages

125. 

     LHFE series Studs with enlarged head diameter have high-strength connection.

     1 Pages

126. 

     LHFH series Studs with enlarged head diameter have high-strength connection.

     1 Pages

127. 

     LFHL/LFHLS series Flush-head studs with high pushout and torque-outresistances.

     1 Pages

128. 

     LFHS series Self-locking flush-head pins.

     1 Pages

129. 

     LFH series Flush-head studs are available in aluminum, steel, orstainless steel . They are also available unthreadedon special order.

     1 Pages

130. 

     LCH series Concealed-head self-clinching aluminum andstainless steel studs.

     1 Pages

131. 

     LRAS series Steel threaded right angle fastener.

     1 Pages

132. 

     LRAA series Aluminum self-tapping right angle fastener.

     1 Pages

133. 

     LPL/LPLC series Nylon insert self-locking fasteners can prevent thewear of threads.

     1 Pages

134. 

     LCFN series Nylon insert self-locking fasteners apply to smallerhole margins .

     1 Pages

135. 

     LLK series Provide self-locking performance without damagingthe locking screw of fittings.

     1 Pages

136. 

     LFE series Mintature self-clinching fasteners have locking andnon-locking threads.

     1 Pages

137. 

     LF series These fasteners are ideal for applications where athin sheet requires load-bearing threads but stillmust remain smooth, with no protrusions on eithersurface.

     1 Pages

138. 

     LH series Steel self-locking and non-locking nuts.

     1 Pages

139. 

     LSMPS series This type are for installation into ultra-thin sheets.They feature a lower profile and can be mountedcloser to the edge of a sheet than other self一clinching nuts.

     1 Pages

140. 

     LS/LSS/LCLS/LCLSS/LSP series Steel and stainless steel self-clinching nuts.

     1 Pages

141. 

     LCLA series Aluminum self-clinching nuts.

     1 Pages

142. 

     LB/LBS series Blind self-clinching fasteners apply to closed thread .

     1 Pages

143. 

     LAS/LAC/LLAS/LLAC series These fasteners provide load-bearing threads inthin sheets and permit up to 0.8mm adjustment formating hole misalignment, and have locking andnon-locking threads.

     1 Pages

144. 

     brass isnert

     52 Pages

145. 

     L303/L403/L653 series Stainless steel thread insert,installation is simple,fast,convenient,and enhance the strength of the screw holes.

     1 Pages

146. 

     L329 series Automotive-Carbon Steel,installation is simple,fast,convenient,and enhance the strength of the screw holes.

     1 Pages

147. 

     L329-3-IC/L329-332-IC series Screw Locking-Carbon Steel,installation is simple,fast,convenient,and enhance the strength of the screw holes.

     1 Pages

148. 

     L353 series Extre Heavy Wall-Carbon Steel,installation is simple,fast,convenient,and enhance the strength of the screw holes.

     1 Pages

149. 

     L319 series Thin Wall-Carbon Steel,Thin wall-carbon steel,installation is simple,fast,convenient,and enhance the strength of the screw holes.

     1 Pages

150. 

     L329 series Stand Wall-Carbon Steel，installation is simple,fast,convenient,and enhance the strength of the screw holes.

     1 Pages

151. 

     L509 series Hydraulic inserts,for complete port protection in hydrualic or fuel systems.

     1 Pages

152. 

     L508 series Hydraulic inserts,for complete port protection in hydrualic or fuel systems.

     1 Pages

153. 

     L507 series Solid keylocking threaded inserts,for relocating holes that have been drilled or tapped in the wrong location, to fill holes,orsalvage expensive castings.

     1 Pages

154. 

     L506 series Floating keylocking threaded inserts,compensate for misalignment automatically.ldeal for use on curved surfaces or for use with flathead screws.

     1 Pages

155. 

     L505 series Blind keylocking threaded inserts.

     1 Pages

156. 

     L504 series Extra heavy duty keylocking threaded inserts, keylocking threaded inserts are used to quickly repair stripprd,damaged or worn out threads with new stronger threads or for use in original equipment.

     1 Pages

157. 

     L502 series Lightweigh keylocking threaded inserts , keylocking threaded lnserts are used to quickly repair stripped,damaged or worn out threads with new stronger threads or for use in original equipment.

     1 Pages

158. 

     L501 series Miniature keylocking threaded inserts, keylocking threaded inserts are used to quickly repair stripped,damaged or worn out threads with new stronger threadsor for use in original equipment.

     1 Pages

159. 

     L401 series Thread inserts create hligh-strength, wear-resistant, heat-resistant threads of highest precision.They are available in free running and screwlock vorsion.

     1 Pages

160. 

     L393 HP- High power, with or without sealing ring.

     1 Pages

161. 

     L392 series Closed version/blind hole,with sealing ring,gas andliquid-tight.

     1 Pages

162. 

     L391 series Safety flange with sealing flange,with sealing ring,effective sealing gases and liquids.

     1 Pages

163. 

     L390 series The sealing ring version is designed for gas and liquid-tightjoints.

     1 Pages

164. 

     L389 series The threaded bush is mechanically anchored withoutadditional securing pins or washers and without chemicaladhesion or sealing materials.

     1 Pages

165. 

     L388 series This type consists of a tapered basic body with internalthread , additional internal hexagon and a special externalthread.

     1 Pages

166. 

     L387 series Self-tapping inserts provide easily installed, strong permanent threads for wood, particle board, ABS, foamedplastic and other soft materials.

     1 Pages

167. 

     L3860 series Self-tapping inserts provide easily installed, strong permanent threads for wood, particle board, ABS, foamedplastic and other soft materials.

     1 Pages

168. 

     L3850 series 3 special cutting slots prevent chips in the thread.

     1 Pages

169. 

     L3840 series Self-tapping inserts series，designed for thermoplasticsand thermosetting plastics.

     1 Pages

170. 

     L3831 series lnternal and external thread with two slots which providecutting edges is similar to a automatic tap.

     1 Pages

171. 

     L3821 series lnternal and external thread with two slots which providecutting edges is similar to a automatic tap.

     1 Pages

172. 

     L381 series This type is a tapered universal insert for thermoplastics(thermal installation, self-tapping and cold insertion).

     1 Pages

173. 

     L379 series Small head diameter，with shaped cutting groove.

     1 Pages

174. 

     L378 series With small head,3 special cutting slots prevent chips inthe thread.

     1 Pages

175. 

     L364 series Simple making improves the efficiency.

     1 Pages

176. 

     L363 series Internal and external thread with two slots provide cuttingedges similar to a tap can be automatic tapping installation.

     1 Pages

177. 

     AG series lnternal and external thread with two slots provide cuttingedges similar to a tap can be automatic tapping installation.

     1 Pages

178. 

     TT The insert is designed and manufactured with three cutting flutes which provide self-tapping function and thestorage of swarf.

     1 Pages

179. 

     DG series Tapping preparetions, internal and external thread design.

     1 Pages

180. 

     L309 series Threaded insert self-tapping, or thread-forming withhexgonal socket.

     1 Pages

181. 

     LSRD series With internal star drive (EN ISO 10664), allows high torquevalues, comply with type LSKD.

     1 Pages

182. 

     LSKL series With hex socket drive and threaded blind hole, silm flanksand the unthreaded lead support easy assembly.

     1 Pages

183. 

     LSK series With hex soket drive, an unthreaded lead supports easyassembly.

     1 Pages

184. 

     LSKDL series With hex drive and a sealing collar, left-hand outsidethread and right-hand internal thread.

     1 Pages

185. 

     LSKD series With hex drive, sealing collar and unthreaded lead.

     1 Pages

186. 

     LE series Slotted and with metric external thread, for assembly inharder materials.

     1 Pages

187. 

     LD series With sealing collar on the slotted end.

     1 Pages

188. 

     LDVZ series Die cast, short version for thin walled shaped wood, withinternal thread stop, only for soft wood.

     1 Pages

189. 

     LCV series Without slot, comply with the type LC.

     1 Pages

190. 

     LCA series They are identical with type LC, but with an unthreadedlead.

     1 Pages

191. 

     LC series Slotted and thin-walled.

     1 Pages

192. 

     LBL series Without slot, with threaded blind hole suitable for heavyduty applications due its length.

     1 Pages

193. 

     LBA series Without slot, similar to DIN 7965, well suited for automaticinsertion.

     1 Pages

194. 

     LBV series Without slot, similar to DIN 7965, well suited for automaticinsertion.

     1 Pages

195. 

     LB series Comply to DIN 7965, slotted and with full internal thread,for easy automatic insertion.

     1 Pages

196. 

     L801 Similar to DIN 7965,slotted and with full internal thread, foreasy automatic insertion.

     1 Pages

197. 

     L702（L377）Die cast zinc alloy hexdrive thread inserts for wood-flanged.

     1 Pages

198. 

     L701（L376） Die cast zinc alloy hexdrive thread inserts for wood-flush.

     1 Pages

199. 

     L374/L375 Brass or stainless steel knife threaded insert for wood.

     1 Pages

200. 

     L304 The threaded insert with cutting bores is a self-tappingfastener for the repair of torn and damaged apsrk plugretaining threads in cylinder heads.

     1 Pages

201. 

     L3570/L3580 series is the blind design version ofL3370/L3380 series.

     1 Pages

202. 

     L374 series Thin wall version of L3070/L3080 series insert, to be usedin thin-walled materials.

     1 Pages

203. 

     L303 series This insert's cutting holes are blind, used in some applications where no cutting chips allowed to drop in tothe borehole.

     1 Pages

204. 

     L317/L318 series inserts are used to absorb extremetorsion and vibration.The anti-rotation function is achieved by inserting a notch pin per DIN1473 standard.

     1 Pages

205. 

     L3070/L3072/L3080/L3082 series Headed version of L3070/L3072/L3080/L3082 seriesinsert, to be used in some applications for higher pull-outstrength.

     1 Pages

206. 

     L3070/L3072/L3080/L3082 series are used in difficult-cutting materials three cutting holes perform the self-tapping action.

     1 Pages

207. 

     The L3021 series is a headed version of L302 series.Thehead can greatly enhance the pull-out and torque resistance.

     1 Pages

208. 

     L302/L302 series inserts are the most widely used oneamong all of the threaded self-tapping inserts. lts twoslots function as the cutting edge and slightly renders aninward screw locking performance.

     1 Pages

209. 

     L302 series series inserts are the most widely used oneamong all of the threaded self-tapping inserts. Its twoslots function as the cutting edge and slightly renders aninward screw locking performance.

     1 Pages

210. 

     PE32

     1 Pages

211. 

     SMD-RAP PE31

     1 Pages

212. 

     SMD-RA PE30

     1 Pages

213. 

     SMD-FTT PE29

     1 Pages

214. 

     SMD-ITT PE28

     1 Pages

215. 

     SMD-FTP PE27

     1 Pages

216. 

     SMD-FT PE26

     1 Pages

217. 

     SMD-IBTP PE25

     1 Pages

218. 

     SMD-IBT PE24

     1 Pages

219. 

     SMD-ETP PE23

     1 Pages

220. 

     SMD-ET PE22

     1 Pages

221. 

     THR-EH PE21

     1 Pages

222. 

     THR-IBT PE20

     1 Pages

223. 

     THR-IHT PE19

     1 Pages

224. 

     TP-SESI PE18

     1 Pages

225. 

     TP-SERE PE17

     1 Pages

226. 

     TP-SESH PE16

     1 Pages

227. 

     TP-SERH PE15

     1 Pages

228. 

     TP-SESE PE14

     1 Pages

229. 

     TP-SERI PE13

     1 Pages

230. 

     TP-GEC PE12

     1 Pages

231. 

     TP-GET PE11

     1 Pages

232. 

     RA-FPU PE10

     1 Pages

233. 

     RA-FPB PE09

     1 Pages

234. 

     RA-FPA PE08

     1 Pages

235. 

     RA-TRB PE07

     1 Pages

236. 

     RA-TRA PE06

     1 Pages

237. 

     ET-FP PE05

     1 Pages

238. 

     IT-FP PE04

     1 Pages

239. 

     IT-C PE03

     1 Pages

240. 

     IT-TRT PE01

     1 Pages

241. 

     In-saiL mold-in threaded insert FT series

     1 Pages

242. 

     In-saiL mold-in brass insert FZ series

     1 Pages

243. 

     In-saiL mold-in threaded insert EZ series

     1 Pages

244. 

     In-saiL mold-in threaded insert SKT series

     1 Pages

245. 

     In-saiL mold-in threaded insert HZ series

     1 Pages

246. 

     In-saiL mold-in brass insert DZ series

     1 Pages

247. 

     In-saiL mold-in brass insert CZ series

     1 Pages

248. 

     In-saiL mold-in threaded insert AZ series

     1 Pages

249. 

     In-saiL mold-in brass insert ITB series

     1 Pages

250. 

     In-saiL mold-in brass insert IT series

     1 Pages

251. 

     In-saiL mold-in brass insert STKB series

     1 Pages

252. 

     In-saiL self-tapping brass insert L383 series

     1 Pages

253. 

     In-saiL self-tapping brass insert L382 series

     1 Pages

254. 

     In-saiL self-tapping threaded brass L384 series

     1 Pages

255. 

     In-saiL self-tapping brass insert TT series

     1 Pages

256. 

     In-saiL press-in threaded insert CL800 series

     1 Pages

257. 

     In-saiL press-in threaded insert CL600 series

     1 Pages

258. 

     In-saiL press-in brass insert MB series

     1 Pages

259. 

     In-saiL press-in brass insert DL series

     1 Pages

260. 

     In-saiL press-in brass insert CL series

     1 Pages

261. 

     In-saiL press-in threaded insert BL series

     1 Pages

262. 

     In-saiL press-in brass insert EL series

     1 Pages

263. 

     In-saiL press-in threaded insert EZL series

     1 Pages

264. 

     In-saiL press-in brass insert GT series

     1 Pages

265. 

     In-saiL press-in brass insert SP series

     1 Pages

266. 

     In-saiL press-in brass insert FS series

     1 Pages

267. 

     In-saiL heat-staking brass insert TSS series

     1 Pages

268. 

     In-saiL heat-staking brass insert HT series

     1 Pages

269. 

     In-saiL heat-staking threaded insert OT series

     1 Pages

270. 

     In-saiL heat-staking threaded insert AT series

     1 Pages

271. 

     In-saiL heat-staking threaded insert MT series

     1 Pages

272. 

     In-saiL heat-staking threaded insert ST series

     1 Pages

273. 

     In-saiL heat-staking threaded insert FB series

     1 Pages

274. 

     In-saiL heat-staking threaded insert HL series

     1 Pages

275. 

     In-saiL heat-staking threaded insert BT series

     1 Pages

276. 

     In-saiL heat-staking threaded insert QT series

     1 Pages