Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Shenzhen In-saiL Precision Parts Co.,Ltd
  3. brass isnert
video corpo

brass isnert
1 /52Pages

brass isnert

brass isnert
1 /52Pages

All Shenzhen In-saiL Precision Parts Co.,Ltd catalogs and technical brochures

  1. DIN1478
    DIN1478

    1  Page

  2. DIN1441
    DIN1441

    1  Page

  3. DIN1440
    DIN1440

    1  Page

  4. DIN976
    DIN976

    1  Page

  5. DIN975
    DIN975

    1  Page

  6. DIN917
    DIN917

    1  Page

  7. DIN916
    DIN916

    1  Page

  8. DIN915
    DIN915

    1  Page

  9. DIN914
    DIN914

    1  Page

  10. DIN792
    DIN792

    1  Page

  11. DIN741
    DIN741

    1  Page

  12. DIN662
    DIN662

    1  Page

  13. DIN661
    DIN661

    1  Page

  14. DIN548
    DIN548

    1  Page

  15. DIN525
    DIN525

    1  Page

  16. DIN508
    DIN508

    1  Page

  17. DIN436
    DIN436

    1  Page

  18. DIN434
    DIN434

    1  Page

  19. DIN432
    DIN432

    1  Page

  20. DIN431
    DIN431

    1  Page

  21. DIN427
    DIN427

    1  Page

  22. DIN417
    DIN417

    1  Page

  23. DIN440
    DIN440

    1  Page

  24. DIN319
    DIN319

    1  Page

  25. DIN261
    DIN261

    1  Page

  26. DIN188
    DIN188

    1  Page

  27. DIN186
    DIN186

    1  Page

  28. DIN127
    DIN127

    1  Page

  29. DIN126
    DIN126

    1  Page

  30. DIN982
    DIN982

    1  Page

  31. DIN986
    DIN986

    1  Page

  32. DIN985
    DIN985

    1  Page

  33. DIN977
    DIN977

    1  Page

  34. DIN967
    DIN967

    1  Page

  35. DIN555
    DIN555

    1  Page

  36. DIN1142
    DIN1142

    1  Page

  37. DIN93
    DIN93

    1  Page

  38. DIN96
    DIN96

    1  Page

  39. DIN97
    DIN97

    1  Page

  40. DIN128
    DIN128

    1  Page

  41. DIN134
    DIN134

    1  Page

  42. DIN316
    DIN316

    1  Page

  43. DIN466
    DIN466

    1  Page

  44. DIN983
    DIN983

    1  Page

  45. DIN984
    DIN984

    1  Page

  46. DIN988
    DIN988

    1  Page

  47. DIN1479
    DIN1479

    1  Page

  48. DIN1481
    DIN1481

    1  Page

  49. DIN1477
    DIN1477

    1  Page

  50. DIN1475
    DIN1475

    1  Page

  51. DIN1474
    DIN1474

    1  Page

  52. DIN1473
    DIN1473

    1  Page

  53. DIN1472
    DIN1472

    1  Page

  54. DIN1471
    DIN1471

    1  Page

  55. DIN1469
    DIN1469

    1  Page

  56. DIN1445
    DIN1445

    1  Page

  57. DIN94
    DIN94

    1  Page

  58. DIN7
    DIN7

    1  Page

  59. DIN1
    DIN1

    1  Page

  60. LFPXA-M8
    LFPXA-M8

    1  Page

  61. LPXAN-M5
    LPXAN-M5

    1  Page

  62. LGLPN-6
    LGLPN-6

    1  Page

  63. LSPPL-M6
    LSPPL-M6

    1  Page

  64. LJJPPN-M2
    LJJPPN-M2

    1  Page

  65. LMPFLT-1. 5
    LMPFLT-1. 5

    1  Page

  66. LMPFS-1. 5
    LMPFS-1. 5

    1  Page

  67. LMPFL-1. 5
    LMPFL-1. 5

    1  Page

  68. LPJSB-10
    LPJSB-10

    1  Page

  69. LPJLTP-M12
    LPJLTP-M12

    1  Page

  70. LSPJY-M3
    LSPJY-M3

    1  Page

  71. LSPJS-M3
    LSPJS-M3

    1  Page

  72. LFPJL-M3
    LFPJL-M3

    1  Page

  73. LPJHZ-M10
    LPJHZ-M10

    1  Page

  74. LPJLF-M5
    LPJLF-M5

    1  Page

  75. LPJLR-M10
    LPJLR-M10

    1  Page

  76. LPJLH-M8
    LPJLH-M8

    1  Page

  77. LPJLSW-M3
    LPJLSW-M3

    1  Page

  78. LPJS-M3
    LPJS-M3

    1  Page

  79. LRBPJ-9
    LRBPJ-9

    1  Page

  80. LTBPJ-1
    LTBPJ-1

    1  Page

  81. LCBPJ-9
    LCBPJ-9

    1  Page

  82. LPFPR-7
    LPFPR-7

    1  Page

  83. LPFSSN-3
    LPFSSN-3

    1  Page

  84. LTBBT-M4 series
    LTBBT-M4 series

    1  Page

  85. LBBT-6 series
    LBBT-6 series

    1  Page

  86. LBPJG series
    LBPJG series

    1  Page

  87. LC-BPE series
    LC-BPE series

    1  Page

  88. LBP series
    LBP series

    1  Page

  89. LFBPJ series
    LFBPJ series

    1  Page

  90. LBSSLS-M3
    LBSSLS-M3

    1  Page

  91. L Selectable Long
    L Selectable Long

    1  Page

  92. LBMSL-M3 series
    LBMSL-M3 series

    1  Page

  93. Long Series
    Long Series

    1  Page

  94. LBPK-M3
    LBPK-M3

    1  Page

  95. LBMJ series
    LBMJ series

    1  Page

  96. LBSN-M6 series
    LBSN-M6 series

    1  Page

  97. LPCF-M8 series
    LPCF-M8 series

    1  Page

  98. LBPR-M5 series
    LBPR-M5 series

    1  Page

  99. LBS-M3 series
    LBS-M3 series

    1  Page

  100. LBPY-M3
    LBPY-M3

    1  Page

  101. LBP-M3 series
    LBP-M3 series

    1  Page

  102. LSMTSO surface mount standoffs.
    LSMTSO surface mount standoffs.

    1  Page

  103. LKSSB Broaching standoffs feature a spring action to holdPC board securely without screws or threaded hardware.
    LKSSB Broaching standoffs feature a spring action to holdPC board securely without screws or threaded hardware.

    1  Page

  104. LKFE Broaching standoffs, threaded or unthreaded forstacking or spacing.
    LKFE Broaching standoffs, threaded or unthreaded forstacking or spacing.

    1  Page

  105. LKF2 Broaching standoffs, threaded or unthreaded formounting on PC boards.
    LKF2 Broaching standoffs, threaded or unthreaded formounting on PC boards.

    1  Page

  106. LSKC-F These type allow detachable joining of two sheets.
    LSKC-F These type allow detachable joining of two sheets.

    1  Page

  107. LSFW series Type LSFW is specially designed to allow pivoting oftwo sheets of metal.A wave washer provides theconsistent torsion to allow repeatable rotation.
    LSFW series Type LSFW is specially designed to allow pivoting oftwo sheets of metal.A wave washer provides theconsistent torsion to allow repeatable rotation.

    1  Page

  108. LSPF series Type LSFP fasteners are made from precipitationhardened stainless steel for installation into stainlesssteel sheets where corrosion resistance may be required.
    LSPF series Type LSFP fasteners are made from precipitationhardened stainless steel for installation into stainlesssteel sheets where corrosion resistance may be required.

    1  Page

  109. LSF series TypeLSF for permanent joining of two metalsheets.
    LSF series TypeLSF for permanent joining of two metalsheets.

    1  Page

  110. LCS series Stainless steel standoffs
    LCS series Stainless steel standoffs

    1  Page

  111. LSKC series Useing PC board or other parts slide into placequickly, playing a role interval.
    LSKC series Useing PC board or other parts slide into placequickly, playing a role interval.

    1  Page

  112. LSS series lnterval PC board with other board or metal plate,simply press the button on the plate cylinder toensure correct needed spacing for both.
    LSS series lnterval PC board with other board or metal plate,simply press the button on the plate cylinder toensure correct needed spacing for both.

    1  Page

  113. LDSO series Threaded standoffs for close-to-edge applications.
    LDSO series Threaded standoffs for close-to-edge applications.

    1  Page

  114. power elements
    power elements

    50  Pages

  115. PE33
    PE33

    1  Page

  116. IT-TRB PE02
    IT-TRB PE02

    1  Page

  117. LTSO series Threaded standoffs for sheet as thin as .025”/0.63mm.
    LTSO series Threaded standoffs for sheet as thin as .025”/0.63mm.

    1  Page

  118. LBSO4 series Blind threaded for installation into stainless steelsheets as thin as .040”/ 1.02 mm.
    LBSO4 series Blind threaded for installation into stainless steelsheets as thin as .040”/ 1.02 mm.

    1  Page

  119. LBSO series Blind bolts with effect from the gauge or fixed to thechassis or circuit board.
    LBSO series Blind bolts with effect from the gauge or fixed to thechassis or circuit board.

    1  Page

  120. LSO series Thru-hole non-threaded can be effected thespacing.
    LSO series Thru-hole non-threaded can be effected thespacing.

    1  Page

  121. LSO4 series Thru-hole threaded for installation into stainlesssteel sheets as thin as .040”/1.02 mm.
    LSO4 series Thru-hole threaded for installation into stainlesssteel sheets as thin as .040”/1.02 mm.

    1  Page

  122. LSO series Thru-hole bolts with effect from the gauge or fixed tothe chassis or circuit board.
    LSO series Thru-hole bolts with effect from the gauge or fixed tothe chassis or circuit board.

    1  Page

  123. LTPS series，LTPS satisfy a wide range of positioning, pivot, andalignment applications.
    LTPS series，LTPS satisfy a wide range of positioning, pivot, andalignment applications.

    1  Page

  124. LTFH/LTFHS series Non-flush for sheets as thin as .020”/0.51 mm.
    LTFH/LTFHS series Non-flush for sheets as thin as .020”/0.51 mm.

    1  Page

  125. LHFE series Studs with enlarged head diameter have high-strength connection.
    LHFE series Studs with enlarged head diameter have high-strength connection.

    1  Page

  126. LHFH series Studs with enlarged head diameter have high-strength connection.
    LHFH series Studs with enlarged head diameter have high-strength connection.

    1  Page

  127. LFHL/LFHLS series Flush-head studs with high pushout and torque-outresistances.
    LFHL/LFHLS series Flush-head studs with high pushout and torque-outresistances.

    1  Page

  128. LFHS series Self-locking flush-head pins.
    LFHS series Self-locking flush-head pins.

    1  Page

  129. LFH series Flush-head studs are available in aluminum, steel, orstainless steel . They are also available unthreadedon special order.
    LFH series Flush-head studs are available in aluminum, steel, orstainless steel . They are also available unthreadedon special order.

    1  Page

  130. LCH series Concealed-head self-clinching aluminum andstainless steel studs.
    LCH series Concealed-head self-clinching aluminum andstainless steel studs.

    1  Page

  131. LRAS series Steel threaded right angle fastener.
    LRAS series Steel threaded right angle fastener.

    1  Page

  132. LRAA series Aluminum self-tapping right angle fastener.
    LRAA series Aluminum self-tapping right angle fastener.

    1  Page

  133. LPL/LPLC series Nylon insert self-locking fasteners can prevent thewear of threads.
    LPL/LPLC series Nylon insert self-locking fasteners can prevent thewear of threads.

    1  Page

  134. LCFN series Nylon insert self-locking fasteners apply to smallerhole margins .
    LCFN series Nylon insert self-locking fasteners apply to smallerhole margins .

    1  Page

  135. LLK series Provide self-locking performance without damagingthe locking screw of fittings.
    LLK series Provide self-locking performance without damagingthe locking screw of fittings.

    1  Page

  136. LFE series Mintature self-clinching fasteners have locking andnon-locking threads.
    LFE series Mintature self-clinching fasteners have locking andnon-locking threads.

    1  Page

  137. LF series These fasteners are ideal for applications where athin sheet requires load-bearing threads but stillmust remain smooth, with no protrusions on eithersurface.
    LF series These fasteners are ideal for applications where athin sheet requires load-bearing threads but stillmust remain smooth, with no protrusions on eithersurface.

    1  Page

  138. LH series Steel self-locking and non-locking nuts.
    LH series Steel self-locking and non-locking nuts.

    1  Page

  139. LSMPS series This type are for installation into ultra-thin sheets.They feature a lower profile and can be mountedcloser to the edge of a sheet than other self一clinching nuts.
    LSMPS series This type are for installation into ultra-thin sheets.They feature a lower profile and can be mountedcloser to the edge of a sheet than other self一clinching nuts.

    1  Page

  140. LS/LSS/LCLS/LCLSS/LSP series Steel and stainless steel self-clinching nuts.
    LS/LSS/LCLS/LCLSS/LSP series Steel and stainless steel self-clinching nuts.

    1  Page

  141. LCLA series Aluminum self-clinching nuts.
    LCLA series Aluminum self-clinching nuts.

    1  Page

  142. LB/LBS series Blind self-clinching fasteners apply to closed thread .
    LB/LBS series Blind self-clinching fasteners apply to closed thread .

    1  Page

  143. LAS/LAC/LLAS/LLAC series These fasteners provide load-bearing threads inthin sheets and permit up to 0.8mm adjustment formating hole misalignment, and have locking andnon-locking threads.
    LAS/LAC/LLAS/LLAC series These fasteners provide load-bearing threads inthin sheets and permit up to 0.8mm adjustment formating hole misalignment, and have locking andnon-locking threads.

    1  Page

  144. L303/L403/L653 series Stainless steel thread insert,installation is simple,fast,convenient,and enhance the strength of the screw holes.
    L303/L403/L653 series Stainless steel thread insert,installation is simple,fast,convenient,and enhance the strength of the screw holes.

    1  Page

  145. L329 series Automotive-Carbon Steel,installation is simple,fast,convenient,and enhance the strength of the screw holes.
    L329 series Automotive-Carbon Steel,installation is simple,fast,convenient,and enhance the strength of the screw holes.

    1  Page

  146. L329-3-IC/L329-332-IC series Screw Locking-Carbon Steel,installation is simple,fast,convenient,and enhance the strength of the screw holes.
    L329-3-IC/L329-332-IC series Screw Locking-Carbon Steel,installation is simple,fast,convenient,and enhance the strength of the screw holes.

    1  Page

  147. L353 series Extre Heavy Wall-Carbon Steel,installation is simple,fast,convenient,and enhance the strength of the screw holes.
    L353 series Extre Heavy Wall-Carbon Steel,installation is simple,fast,convenient,and enhance the strength of the screw holes.

    1  Page

  148. L319 series Thin Wall-Carbon Steel,Thin wall-carbon steel,installation is simple,fast,convenient,and enhance the strength of the screw holes.
    L319 series Thin Wall-Carbon Steel,Thin wall-carbon steel,installation is simple,fast,convenient,and enhance the strength of the screw holes.

    1  Page

  149. L329 series Stand Wall-Carbon Steel，installation is simple,fast,convenient,and enhance the strength of the screw holes.
    L329 series Stand Wall-Carbon Steel，installation is simple,fast,convenient,and enhance the strength of the screw holes.

    1  Page

  150. L509 series Hydraulic inserts,for complete port protection in hydrualic or fuel systems.
    L509 series Hydraulic inserts,for complete port protection in hydrualic or fuel systems.

    1  Page

  151. L508 series Hydraulic inserts,for complete port protection in hydrualic or fuel systems.
    L508 series Hydraulic inserts,for complete port protection in hydrualic or fuel systems.

    1  Page

  152. L507 series Solid keylocking threaded inserts,for relocating holes that have been drilled or tapped in the wrong location, to fill holes,orsalvage expensive castings.
    L507 series Solid keylocking threaded inserts,for relocating holes that have been drilled or tapped in the wrong location, to fill holes,orsalvage expensive castings.

    1  Page

  153. L506 series Floating keylocking threaded inserts,compensate for misalignment automatically.ldeal for use on curved surfaces or for use with flathead screws.
    L506 series Floating keylocking threaded inserts,compensate for misalignment automatically.ldeal for use on curved surfaces or for use with flathead screws.

    1  Page

  154. L505 series Blind keylocking threaded inserts.
    L505 series Blind keylocking threaded inserts.

    1  Page

  155. L504 series Extra heavy duty keylocking threaded inserts, keylocking threaded inserts are used to quickly repair stripprd,damaged or worn out threads with new stronger threads or for use in original equipment.
    L504 series Extra heavy duty keylocking threaded inserts, keylocking threaded inserts are used to quickly repair stripprd,damaged or worn out threads with new stronger threads or for use in original equipment.

    1  Page

  156. L503 series Heavy duty keylocking threaded lnserts, keylocking threaded inserts are used to quickly repair stripped,damaged or worn out threads with new stronger threads or for use in original equipment.
    L503 series Heavy duty keylocking threaded lnserts, keylocking threaded inserts are used to quickly repair stripped,damaged or worn out threads with new stronger threads or for use in original equipment.

    1  Page

  157. L502 series Lightweigh keylocking threaded inserts , keylocking threaded lnserts are used to quickly repair stripped,damaged or worn out threads with new stronger threads or for use in original equipment.
    L502 series Lightweigh keylocking threaded inserts , keylocking threaded lnserts are used to quickly repair stripped,damaged or worn out threads with new stronger threads or for use in original equipment.

    1  Page

  158. L501 series Miniature keylocking threaded inserts, keylocking threaded inserts are used to quickly repair stripped,damaged or worn out threads with new stronger threadsor for use in original equipment.
    L501 series Miniature keylocking threaded inserts, keylocking threaded inserts are used to quickly repair stripped,damaged or worn out threads with new stronger threadsor for use in original equipment.

    1  Page

  159. L401 series Thread inserts create hligh-strength, wear-resistant, heat-resistant threads of highest precision.They are available in free running and screwlock vorsion.
    L401 series Thread inserts create hligh-strength, wear-resistant, heat-resistant threads of highest precision.They are available in free running and screwlock vorsion.

    1  Page

  160. L393 HP- High power, with or without sealing ring.
    L393 HP- High power, with or without sealing ring.

    1  Page

  161. L392 series Closed version/blind hole,with sealing ring,gas andliquid-tight.
    L392 series Closed version/blind hole,with sealing ring,gas andliquid-tight.

    1  Page

  162. L391 series Safety flange with sealing flange,with sealing ring,effective sealing gases and liquids.
    L391 series Safety flange with sealing flange,with sealing ring,effective sealing gases and liquids.

    1  Page

  163. L390 series The sealing ring version is designed for gas and liquid-tightjoints.
    L390 series The sealing ring version is designed for gas and liquid-tightjoints.

    1  Page

  164. L389 series The threaded bush is mechanically anchored withoutadditional securing pins or washers and without chemicaladhesion or sealing materials.
    L389 series The threaded bush is mechanically anchored withoutadditional securing pins or washers and without chemicaladhesion or sealing materials.

    1  Page

  165. L388 series This type consists of a tapered basic body with internalthread , additional internal hexagon and a special externalthread.
    L388 series This type consists of a tapered basic body with internalthread , additional internal hexagon and a special externalthread.

    1  Page

  166. L387 series Self-tapping inserts provide easily installed, strong permanent threads for wood, particle board, ABS, foamedplastic and other soft materials.
    L387 series Self-tapping inserts provide easily installed, strong permanent threads for wood, particle board, ABS, foamedplastic and other soft materials.

    1  Page

  167. L3860 series Self-tapping inserts provide easily installed, strong permanent threads for wood, particle board, ABS, foamedplastic and other soft materials.
    L3860 series Self-tapping inserts provide easily installed, strong permanent threads for wood, particle board, ABS, foamedplastic and other soft materials.

    1  Page

  168. L3850 series 3 special cutting slots prevent chips in the thread.
    L3850 series 3 special cutting slots prevent chips in the thread.

    1  Page

  169. L3840 series Self-tapping inserts series，designed for thermoplasticsand thermosetting plastics.
    L3840 series Self-tapping inserts series，designed for thermoplasticsand thermosetting plastics.

    1  Page

  170. L3831 series lnternal and external thread with two slots which providecutting edges is similar to a automatic tap.
    L3831 series lnternal and external thread with two slots which providecutting edges is similar to a automatic tap.

    1  Page

  171. L3821 series lnternal and external thread with two slots which providecutting edges is similar to a automatic tap.
    L3821 series lnternal and external thread with two slots which providecutting edges is similar to a automatic tap.

    1  Page

  172. L381 series This type is a tapered universal insert for thermoplastics(thermal installation, self-tapping and cold insertion).
    L381 series This type is a tapered universal insert for thermoplastics(thermal installation, self-tapping and cold insertion).

    1  Page

  173. L379 series Small head diameter，with shaped cutting groove.
    L379 series Small head diameter，with shaped cutting groove.

    1  Page

  174. L378 series With small head,3 special cutting slots prevent chips inthe thread.
    L378 series With small head,3 special cutting slots prevent chips inthe thread.

    1  Page

  175. L364 series Simple making improves the efficiency.
    L364 series Simple making improves the efficiency.

    1  Page

  176. L363 series Internal and external thread with two slots provide cuttingedges similar to a tap can be automatic tapping installation.
    L363 series Internal and external thread with two slots provide cuttingedges similar to a tap can be automatic tapping installation.

    1  Page

  177. AG series lnternal and external thread with two slots provide cuttingedges similar to a tap can be automatic tapping installation.
    AG series lnternal and external thread with two slots provide cuttingedges similar to a tap can be automatic tapping installation.

    1  Page

  178. TT The insert is designed and manufactured with three cutting flutes which provide self-tapping function and thestorage of swarf.
    TT The insert is designed and manufactured with three cutting flutes which provide self-tapping function and thestorage of swarf.

    1  Page

  179. DG series Tapping preparetions, internal and external thread design.
    DG series Tapping preparetions, internal and external thread design.

    1  Page

  180. L309 series Threaded insert self-tapping, or thread-forming withhexgonal socket.
    L309 series Threaded insert self-tapping, or thread-forming withhexgonal socket.

    1  Page

  181. LSRD series With internal star drive (EN ISO 10664), allows high torquevalues, comply with type LSKD.
    LSRD series With internal star drive (EN ISO 10664), allows high torquevalues, comply with type LSKD.

    1  Page

  182. LSKL series With hex socket drive and threaded blind hole, silm flanksand the unthreaded lead support easy assembly.
    LSKL series With hex socket drive and threaded blind hole, silm flanksand the unthreaded lead support easy assembly.

    1  Page

  183. LSK series With hex soket drive, an unthreaded lead supports easyassembly.
    LSK series With hex soket drive, an unthreaded lead supports easyassembly.

    1  Page

  184. LSKDL series With hex drive and a sealing collar, left-hand outsidethread and right-hand internal thread.
    LSKDL series With hex drive and a sealing collar, left-hand outsidethread and right-hand internal thread.

    1  Page

  185. LSKD series With hex drive, sealing collar and unthreaded lead.
    LSKD series With hex drive, sealing collar and unthreaded lead.

    1  Page

  186. LE series Slotted and with metric external thread, for assembly inharder materials.
    LE series Slotted and with metric external thread, for assembly inharder materials.

    1  Page

  187. LD series With sealing collar on the slotted end.
    LD series With sealing collar on the slotted end.

    1  Page

  188. LDVZ series Die cast, short version for thin walled shaped wood, withinternal thread stop, only for soft wood.
    LDVZ series Die cast, short version for thin walled shaped wood, withinternal thread stop, only for soft wood.

    1  Page

  189. LCV series Without slot, comply with the type LC.
    LCV series Without slot, comply with the type LC.

    1  Page

  190. LCA series They are identical with type LC, but with an unthreadedlead.
    LCA series They are identical with type LC, but with an unthreadedlead.

    1  Page

  191. LC series Slotted and thin-walled.
    LC series Slotted and thin-walled.

    1  Page

  192. LBL series Without slot, with threaded blind hole suitable for heavyduty applications due its length.
    LBL series Without slot, with threaded blind hole suitable for heavyduty applications due its length.

    1  Page

  193. LBA series Without slot, similar to DIN 7965, well suited for automaticinsertion.
    LBA series Without slot, similar to DIN 7965, well suited for automaticinsertion.

    1  Page

  194. LBV series Without slot, similar to DIN 7965, well suited for automaticinsertion.
    LBV series Without slot, similar to DIN 7965, well suited for automaticinsertion.

    1  Page

  195. LB series Comply to DIN 7965, slotted and with full internal thread,for easy automatic insertion.
    LB series Comply to DIN 7965, slotted and with full internal thread,for easy automatic insertion.

    1  Page

  196. L801 Similar to DIN 7965,slotted and with full internal thread, foreasy automatic insertion.
    L801 Similar to DIN 7965,slotted and with full internal thread, foreasy automatic insertion.

    1  Page

  197. L702（L377）Die cast zinc alloy hexdrive thread inserts for wood-flanged.
    L702（L377）Die cast zinc alloy hexdrive thread inserts for wood-flanged.

    1  Page

  198. L701（L376） Die cast zinc alloy hexdrive thread inserts for wood-flush.
    L701（L376） Die cast zinc alloy hexdrive thread inserts for wood-flush.

    1  Page

  199. L374/L375 Brass or stainless steel knife threaded insert for wood.
    L374/L375 Brass or stainless steel knife threaded insert for wood.

    1  Page

  200. L304 The threaded insert with cutting bores is a self-tappingfastener for the repair of torn and damaged apsrk plugretaining threads in cylinder heads.
    L304 The threaded insert with cutting bores is a self-tappingfastener for the repair of torn and damaged apsrk plugretaining threads in cylinder heads.

    1  Page

  201. L3570/L3580 series is the blind design version ofL3370/L3380 series.
    L3570/L3580 series is the blind design version ofL3370/L3380 series.

    1  Page

  202. L374 series Thin wall version of L3070/L3080 series insert, to be usedin thin-walled materials.
    L374 series Thin wall version of L3070/L3080 series insert, to be usedin thin-walled materials.

    1  Page

  203. L303 series This insert's cutting holes are blind, used in some applications where no cutting chips allowed to drop in tothe borehole.
    L303 series This insert's cutting holes are blind, used in some applications where no cutting chips allowed to drop in tothe borehole.

    1  Page

  204. L317/L318 series inserts are used to absorb extremetorsion and vibration.The anti-rotation function is achieved by inserting a notch pin per DIN1473 standard.
    L317/L318 series inserts are used to absorb extremetorsion and vibration.The anti-rotation function is achieved by inserting a notch pin per DIN1473 standard.

    1  Page

  205. L3070/L3072/L3080/L3082 series Headed version of L3070/L3072/L3080/L3082 seriesinsert, to be used in some applications for higher pull-outstrength.
    L3070/L3072/L3080/L3082 series Headed version of L3070/L3072/L3080/L3082 seriesinsert, to be used in some applications for higher pull-outstrength.

    1  Page

  206. L3070/L3072/L3080/L3082 series are used in difficult-cutting materials three cutting holes perform the self-tapping action.
    L3070/L3072/L3080/L3082 series are used in difficult-cutting materials three cutting holes perform the self-tapping action.

    1  Page

  207. The L3021 series is a headed version of L302 series.Thehead can greatly enhance the pull-out and torque resistance.
    The L3021 series is a headed version of L302 series.Thehead can greatly enhance the pull-out and torque resistance.

    1  Page

  208. L302/L302 series inserts are the most widely used oneamong all of the threaded self-tapping inserts. lts twoslots function as the cutting edge and slightly renders aninward screw locking performance.
    L302/L302 series inserts are the most widely used oneamong all of the threaded self-tapping inserts. lts twoslots function as the cutting edge and slightly renders aninward screw locking performance.

    1  Page

  209. L302 series series inserts are the most widely used oneamong all of the threaded self-tapping inserts. Its twoslots function as the cutting edge and slightly renders aninward screw locking performance.
    L302 series series inserts are the most widely used oneamong all of the threaded self-tapping inserts. Its twoslots function as the cutting edge and slightly renders aninward screw locking performance.

    1  Page

  210. PE32
    PE32

    1  Page

  211. SMD-RAP PE31
    SMD-RAP PE31

    1  Page

  212. SMD-RA PE30
    SMD-RA PE30

    1  Page

  213. SMD-FTT PE29
    SMD-FTT PE29

    1  Page

  214. SMD-ITT PE28
    SMD-ITT PE28

    1  Page

  215. SMD-FTP PE27
    SMD-FTP PE27

    1  Page

  216. SMD-FT PE26
    SMD-FT PE26

    1  Page

  217. SMD-IBTP PE25
    SMD-IBTP PE25

    1  Page

  218. SMD-IBT PE24
    SMD-IBT PE24

    1  Page

  219. SMD-ETP PE23
    SMD-ETP PE23

    1  Page

  220. SMD-ET PE22
    SMD-ET PE22

    1  Page

  221. THR-EH PE21
    THR-EH PE21

    1  Page

  222. THR-IBT PE20
    THR-IBT PE20

    1  Page

  223. THR-IHT PE19
    THR-IHT PE19

    1  Page

  224. TP-SESI PE18
    TP-SESI PE18

    1  Page

  225. TP-SERE PE17
    TP-SERE PE17

    1  Page

  226. TP-SESH PE16
    TP-SESH PE16

    1  Page

  227. TP-SERH PE15
    TP-SERH PE15

    1  Page

  228. TP-SESE PE14
    TP-SESE PE14

    1  Page

  229. TP-SERI PE13
    TP-SERI PE13

    1  Page

  230. TP-GEC PE12
    TP-GEC PE12

    1  Page

  231. TP-GET PE11
    TP-GET PE11

    1  Page

  232. RA-FPU PE10
    RA-FPU PE10

    1  Page

  233. RA-FPB PE09
    RA-FPB PE09

    1  Page

  234. RA-FPA PE08
    RA-FPA PE08

    1  Page

  235. RA-TRB PE07
    RA-TRB PE07

    1  Page

  236. RA-TRA PE06
    RA-TRA PE06

    1  Page

  237. ET-FP PE05
    ET-FP PE05

    1  Page

  238. IT-FP PE04
    IT-FP PE04

    1  Page

  239. IT-C PE03
    IT-C PE03

    1  Page

  240. IT-TRT PE01
    IT-TRT PE01

    1  Page

  241. In-saiL mold-in threaded insert FT series
    In-saiL mold-in threaded insert FT series

    1  Page

  242. In-saiL mold-in brass insert FZ series
    In-saiL mold-in brass insert FZ series

    1  Page

  243. In-saiL mold-in threaded insert EZ series
    In-saiL mold-in threaded insert EZ series

    1  Page

  244. In-saiL mold-in threaded insert SKT series
    In-saiL mold-in threaded insert SKT series

    1  Page

  245. In-saiL mold-in threaded insert HZ series
    In-saiL mold-in threaded insert HZ series

    1  Page

  246. In-saiL mold-in brass insert DZ series
    In-saiL mold-in brass insert DZ series

    1  Page

  247. In-saiL mold-in brass insert CZ series
    In-saiL mold-in brass insert CZ series

    1  Page

  248. In-saiL mold-in threaded insert AZ series
    In-saiL mold-in threaded insert AZ series

    1  Page

  249. In-saiL mold-in brass insert ITB series
    In-saiL mold-in brass insert ITB series

    1  Page

  250. In-saiL mold-in brass insert IT series
    In-saiL mold-in brass insert IT series

    1  Page

  251. In-saiL mold-in brass insert STKB series
    In-saiL mold-in brass insert STKB series

    1  Page

  252. In-saiL self-tapping brass insert L383 series
    In-saiL self-tapping brass insert L383 series

    1  Page

  253. In-saiL self-tapping brass insert L382 series
    In-saiL self-tapping brass insert L382 series

    1  Page

  254. In-saiL self-tapping threaded brass L384 series
    In-saiL self-tapping threaded brass L384 series

    1  Page

  255. In-saiL self-tapping brass insert TT series
    In-saiL self-tapping brass insert TT series

    1  Page

  256. In-saiL press-in threaded insert CL800 series
    In-saiL press-in threaded insert CL800 series

    1  Page

  257. In-saiL press-in threaded insert CL600 series
    In-saiL press-in threaded insert CL600 series

    1  Page

  258. In-saiL press-in brass insert MB series
    In-saiL press-in brass insert MB series

    1  Page

  259. In-saiL press-in brass insert DL series
    In-saiL press-in brass insert DL series

    1  Page

  260. In-saiL press-in brass insert CL series
    In-saiL press-in brass insert CL series

    1  Page

  261. In-saiL press-in threaded insert BL series
    In-saiL press-in threaded insert BL series

    1  Page

  262. In-saiL press-in brass insert EL series
    In-saiL press-in brass insert EL series

    1  Page

  263. In-saiL press-in threaded insert EZL series
    In-saiL press-in threaded insert EZL series

    1  Page

  264. In-saiL press-in brass insert GT series
    In-saiL press-in brass insert GT series

    1  Page

  265. In-saiL press-in brass insert SP series
    In-saiL press-in brass insert SP series

    1  Page

  266. In-saiL press-in brass insert FS series
    In-saiL press-in brass insert FS series

    1  Page

  267. In-saiL heat-staking brass insert TSS series
    In-saiL heat-staking brass insert TSS series

    1  Page

  268. In-saiL heat-staking brass insert HT series
    In-saiL heat-staking brass insert HT series

    1  Page

  269. In-saiL heat-staking threaded insert OT series
    In-saiL heat-staking threaded insert OT series

    1  Page

  270. In-saiL heat-staking threaded insert AT series
    In-saiL heat-staking threaded insert AT series

    1  Page

  271. In-saiL heat-staking threaded insert MT series
    In-saiL heat-staking threaded insert MT series

    1  Page

  272. In-saiL heat-staking threaded insert ST series
    In-saiL heat-staking threaded insert ST series

    1  Page

  273. In-saiL heat-staking threaded insert FB series
    In-saiL heat-staking threaded insert FB series

    1  Page

  274. In-saiL heat-staking threaded insert HL series
    In-saiL heat-staking threaded insert HL series

    1  Page

  275. In-saiL heat-staking threaded insert BT series
    In-saiL heat-staking threaded insert BT series

    1  Page

  276. In-saiL heat-staking threaded insert QT series
    In-saiL heat-staking threaded insert QT series

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.