Shenzhen Hongguang Display Co.,Ltd CUSTOMER : CUSTOMER MODULE : HL MODEL  Preliminary Specification ■Final Specification Customer Confirmation column： Approved by : Please return one of the copies of the specification with your signature to us within two weeks after you receive this document.If it is not returned,we will assume that you agree to the entire contents of this specification document. Hongguang Display

Shenzhen Hongguang Display Co.,Ltd Document Revision History Version First issue Hongguang Display

Shenzhen Hongguang Display Co.,Ltd Index Contents

Shenzhen Hongguang Display Co.,Ltd 1. LCM Specification 1.1 Description ＨＧ１０１ＷＸ０２８ is a transmissive type color active matrix liquid crystal display(LCD) which uses amorphous thin film transistor(TFT) as switching devices. This product is composed of a TFT LCD panel, a Tcon, two FPCs and a LED-backlight unit. The active display area is 10.1 inches diagonally measured and the native resolution is 1280*RGB*800.Features of this product are listed in the following table. 1.2 Functions & Features Table 1.1 Module Functions & Features Parameter Value LCD Mode TFT/Transmissive Color Depth 16.7M Display...

View Direction:All

Shenzhen Hongguang Display Co.,Ltd 3. Pin Descriptions Pin No. Power Supply LVDS- Differential Data Input LVDS+ Differential Data Input LVDS- Differential Data Input LVDS+ Differential Data Input LVDS- Differential Data Input LVDS+ Differential Data Input LVDS- Differential Clock Input LVDS+ Differential Clock Input LVDS- Differential Data Input LVDS+ Differential Data Input Power for Analog Circuit Hongguang Display

Shenzhen Hongguang Display Co.,Ltd 4. Electrical Units 4.1 Absolute Maximum Ratings Hongguang Display

Shenzhen Hongguang Display Co.,Ltd 4.2 Electrical characteristics (Ta=25C) Hongguang Display

Shenzhen Hongguang Display Co.,Ltd 4.4 Back-light Specification Table 4.3 Back-light Characteristics Item Supply Voltage Supply Current Average Brightness CIE Color Coordinate (Without LCD) Note: 3 LEDs in series 13 parallel connection. Color temperature of center point:7200K Type. Hongguang Display

Shenzhen Hongguang Display Co.,Ltd 5. AC Characteristics 5.1 LVDS Signal Timing Characteristics Hongguang Display

Shenzhen Hongguang Display Co.,Ltd 5.1.2 Timing Table Hongguang Display

Shenzhen Hongguang Display Co.,Ltd 5.1.3 LVDS Data Input Format 6. Power On/Off Sequence Hongguang Display

Shenzhen Hongguang Display Co.,Ltd Hongguang Display

Shenzhen Hongguang Display Co.,Ltd 7. Optical Specifications Hongguang Display

Shenzhen Hongguang Display Co.,Ltd Hongguang Display

Shenzhen Hongguang Display Co.,Ltd Hongguang Display

Shenzhen Hongguang Display Co.,Ltd 8. Reliability Test Items Hongguang Display

Shenzhen Hongguang Display Co.,Ltd 9.Handling Precautions 9.1 Safety The liquid crystal in the LCD is poisonous. Keep away from your mouth and eyes. If the liquid crystal contacts with your skin, mouse or clothes, use soap to wash it off immediately. 9.2 Handling i. The LCD panel is made of very thin glass. the surface should be prevented. Mechanical impact or extrusion to ii. The polarizer attached on the display is very easy to be damaged, handle it with special attention. iii. To avoid contamination on the display surface, do not touch the display surface with bare hands. iv. The transparent...

Shenzhen Hongguang Display Co.,Ltd 10. QC 10.1 Classification of defects Defects are classified two types, major defect and minor defect according to the defect. And, the definition of defects is classified as below. (1) Major defect Any defect may result in functional failure, or reduce the usability of product for its purpose. For example, electrical failure, deformation and etc.. (2) Minor defect A defect that is not to reduce the usability of product for its intended purpose and un-uniformity, dot defect and etc.. The criteria on major or minor judgment will be according with the classification...

Shenzhen Hongguang Display Co.,Ltd (2) Display Inspection Standards when Power On *Note: Defect which is on the Black Matrix(outside of Active Area) are not considered as a defect Hongguang Display

Shenzhen Hongguang Display Co.,Ltd (3) External Appearance Inspection Criteria (Power Off) Notes: 1. If any specific defect is not included in the above defect table, this defect should be judged by INX/ODM/Brand customer discussion. 2. Defect was ignored if invisible at the user side. 3. Any defect can be wiped off, ignore. Hongguang Display