HG101WU072
23Pages

Catalog excerpts

Shenzhen Hongguang Display Co.,Ltd CUSTOMER : CUSTOMER MODULE : HL MODEL  ■Final Specification Customer Confirmation column： Dept. : Please return one of the copies of the specification with your signature to us within two weeks after you receive this document.If it is not returned,we will assume that you agree to the entire contents of this specification document. Hongguang Display

Open the catalog to page 1

Shenzhen Hongguang Display Co.,Ltd Revision History Version NO. FIRST ISSUE Hongguang Display

Open the catalog to page 2

Shenzhen Hongguang Display Co.,Ltd Contents No. General Description Absolute Maximum Ratings Electrical Specifications Optical Specifications Reliability Test Packing Information Handling & Cautions Hongguang Display

Open the catalog to page 3

Shenzhen Hongguang Display Co.,Ltd 1.0 GENERAL DESCRIPTION 1.1 Introduction HG101WU072 is a color active matrix TFT LCM using amorphous silico n TFT‘s (Thin Film Transistors) as an active switching devices. This module ha s a 10.1 inch diagonally measured active area with WUXGA resolutions (1920 horizontal by 1200 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and this module can display 1 6.7M colors. 图示 LIGHT Panel TFTBACK LCD (Fluorescent Lamp) 1920 ×1200 Source Driver V_LED Back Light (LED Array) 1.2 Features  LVDS...

Open the catalog to page 4

Shenzhen Hongguang Display Co.,Ltd 1.3 Application  G Industrial 1.4 General Specification The followings are general specifications at the HG101WU072 Parameter Active Area Pixel Pitch Pixel Arrangement Pixels RGB stripe arrangement Display Mode Normally Black Display Colors Surface Treatment Contrast Ratio Response Time Color Gamut Power Consumption Outline Dimension Hongguang Display

Open the catalog to page 5

Shenzhen Hongguang Display Co.,Ltd 2.0 ABSOLUTE MAXIMUM RATINGS The followings are maximum values which, if exceed, may cause faulty operation or damage to the unit. < Table 2. Absolute Maximum Ratings> Parameter Power Suppl LCD Modu y le Operating Temperature Storage Temperature Operating Ambient Humi dity Storage Humidity Hongguang Display

Open the catalog to page 6

Shenzhen Hongguang Display Co.,Ltd 3.0 ELECTRICAL SPECIFICATIONS 3.1 TFT LCD Module < Table 3. LCD Module Electrical specifications > Parameter Power Supply Voltage Power Supply Current Power Consumption Rush current Input Voltage Output Voltage CMOS Interface Ripple Note 1 Note 2 Notes : 1. The supply voltage is measured and specified at the interface connector of LCM. The current draw and power consumption specified is for VDD=3.3V, Frame rate fV=60Hz and Clock frequency = 80MHz. Test Pattern of power supply current a) Typ : Mosaic 8 x 6 Pattern(L0/L255) b) Max : skip subPixel(L255) 2....

Open the catalog to page 7

Shenzhen Hongguang Display Co.,Ltd 3.2 INPUT TERMINAL PIN ASSIGNMENT This LCD employs one interface connections, a 45 pin connector is used for the LCD module electronics interface. 3.2.1 Pin assignment for LCD module Connector : FH34SRJ-45S-0.5SH(50) (HRS) or equivalent < Table4. Pin Assignment for LCD Module Connector > Pin No. EVEN LVDS Positive data signal (+) EVEN LVDS Negative data signal (-) EVEN LVDS Positive data signal (+) EVEN LVDS Negative data signal (-) EVEN LVDS Positive CLK signal (+) EVEN LVDS Negative CLK signal (-) EVEN LVDS Positive data signal (+) EVEN LVDS Negative...

Open the catalog to page 8

Shenzhen Hongguang Display Co.,Ltd Pin No. Symbol Odd LVDS Positive data signal (+) Odd LVDS Negative data signal (-) Odd LVDS Positive data signal (+) Odd LVDS Negative data signal (-) Odd LVDS Positive CLK signal (+) Odd LVDS Negative CLK signal (-) Odd LVDS Positive data signal (+) Odd LVDS Negative data signal (-) Odd LVDS Positive data signal (+) Odd LVDS Negative data signal (-) Hongguang Display Reserved for LCD manufacturer’s use , not connection Not Connection

Open the catalog to page 9

Shenzhen Hongguang Display Co.,Ltd 3.3 Interface timing Parameter and AC/DC Parameter The QV101WUB-N80 is operated by the DE only < Table5. LVDS Timing Parameter > DCLK Frequency Horizontal display area HSYNC period time Horizontal Blank HSYNC pulse width HSYNC back porch HSYNC Front porch Vertical display area VSYNC period time Vertical Blank VSYNC Pluse width VSYNC back porch VSYNC front porch Hongguang Display

Open the catalog to page 10

Shenzhen Hongguang Display Co.,Ltd Item CLKfrequency CLKIN Period Input Data 0 Input Data 1 MHZ nsec nsec nsec * Vdiff = (RXz+)-(RXz-),…. ,(RXCLK+)-(RXCLK-) Hongguang Display

Open the catalog to page 11

Shenzhen Hongguang Display Co.,Ltd Item Differential input high T hreshold voltage Differential input low T hreshold voltage Differential input comm on Threshold voltage LVDS input voltage Differential input volta ge Differential input leakag e voltage Hongguang Display

Open the catalog to page 12

Shenzhen Hongguang Display Co.,Ltd 3.4 Power Sequence Hongguang Display

Open the catalog to page 13

Shenzhen Hongguang Display Co.,Ltd Hongguang Display

Open the catalog to page 14

Shenzhen Hongguang Display Co.,Ltd 4.0 OPTICAL SPECIFICATIONS 4.1 Overview The test of optical specifications shall be measured in a dark room (ambient luminance  1lux and temperature = 252℃) with the equipment of Luminance meter system (Gonio meter system and TOPCON BM-5) and test unit shall be located at an approximate dista nce 50cm from the LCD surface at a viewing angle of θ and Φ equal to 0. We refer to θØ =0 (=θ3 ) as the 3 o’clock direction (the “right”), θØ=90 (= θ12 ) as the 12 O’clock direction (“upward”), θØ=180 (= θ9 ) as the 9 O’clock direction (“left”) and θØ=27 0(= θ6 )...

Open the catalog to page 15

Shenzhen Hongguang Display Co.,Ltd Note 1:The definition of Viewing Angle Refer to the graph below marked by θ and Ф. Luminance When LCD is at “White” state Luminance When LCD is at “Black” state (Contrast Ratio is measured in optimum common electrode voltage) Note3:DefinitionofResponse time.(Test LCD using RD80S or similar equipments): The output sign also photo detector are measured when the input sign also are changed from “black” to “white”(Voltage falling time)and from “white” to “black” (Voltage rising time), respectively .Th e response time is defined as the time interval between the...

Open the catalog to page 16