HG101WS045
22Pages

Catalog excerpts

Shenzhen Hongguang Display Co.,Ltd CUSTOMER : CUSTOMER MODULE : HL MODEL  Preliminary Specification ■Final Specification Customer Confirmation column： Approved by : Please return one of the copies of the specification with your signature to us within two weeks after you receive this document.If it is not returned,we will assume that you agree to the entire contents of this specification document. Hongguang Display

Open the catalog to page 1

Shenzhen Hongguang Display Co.,Ltd REVISION RECORD REV NO 1.0 Hongguang Display First Release

Open the catalog to page 2

Shenzhen Hongguang Display Co.,Ltd TABLE OF CONTENT 1.0 GENERAL SPECIFICATIONS ELECTRICAL CHARACTERISTICS BACKLIGHT CHARACTERISTICS DIMENSIONAL DRAWING ELECTRO-OPTICAL CHARACTERISTICS INSPECTION CRITERIA PRECAUTIONS FOR USING LCD MODULE Hongguang Display

Open the catalog to page 3

Shenzhen Hongguang Display Co.,Ltd 1.0 General Specifications HG101WS045-V0 is a color active matrix LCD module incorporatinga morphous silicon TFT (Thin Film Transistor). It is composed of a colorTFTLCD panel, driver IC, FPC and a back light unit. The module display areacontains 1024x 600pixels. This product accords with RoHS environmentalcriterion. Item Viewing direction Number of Dots Driver IC Backlight Type Interface Type Input voltage Hongguang Display

Open the catalog to page 4

Shenzhen Hongguang Display Co.,Ltd 2.0 ELECTRICAL CHARACTERISTICS Item Power Voltage Input signal voltage Input logic high voltage Input logic low voltage DVDD AVDD Note1：If users use the product out off the environmemtal operation range（temperature and humidity）,it will have visual quality concerns. Note2：Be sure to apply DVDD and VGL to the LCD first,and then apply VGH Note3：DVDD setting should match the signals output voltage(refer to Note4)of customer's system board. Note4：DCLK,HS,VS,RESET,U/D,L/R,DE,R0-R7.G0-G7,B0-B7,MODE,DITHB. Note5：Typical VCOM is only a reference value,it must be...

Open the catalog to page 5

Shenzhen Hongguang Display Co.,Ltd Current Consumption Item Symbol IGH IGL IVDD IAVDD BACKLIGHT CHARACTERISTICS Item Forward voltage Connection mode Hongguang Display

Open the catalog to page 6

Shenzhen Hongguang Display Co.,Ltd 4.0 DIMENSIONAL DRAWING Hongguang Display

Open the catalog to page 7

Shenzhen Hongguang Display Co.,Ltd 5.0 INTERFACE PIN CONNECTIONS Pin.No Power ground Common Voltage Digital Power DE/SYNC mode select. Normally pull high H: DE mode. L: HSD/VSD mode Data Enable signal. Vertical sync input. Negative polarity Horizontal sync input. Negative polarity Blue Data Green Data Colock signal Display on/off Left or Right Display Control Up / Down Display Control Analog Power Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ，C=1μF) Common Voltage Dithering setting DITH=”H” 6bit...

Open the catalog to page 8

Shenzhen Hongguang Display Co.,Ltd 5.1 Timing characteristics 5.1.1 AC Electrical Characteristics Item HS setup time HS hold time VS setup time VS hold time Data setup time Data hold time DE setup time DE hold time VDD Power On Slew rate RESET pulse width DCLK cycle time DCLK pulse duty Thst Thhd Tvst Tvhd Tdsu Tdhd Tesu Tehd TRST Tcoh Tcwh 5.1.2 Input Clock and Data Timing Diagram Hongguang Display

Open the catalog to page 9

Shenzhen Hongguang Display Co.,Ltd 5.1.3 Timing DCLK Frequency Horizontal Display Area VS period time HS pulse width HS Blanking HS Front Porch Vertical Display Area VS period time VS pulse width VS Blanking VS Front Porch fclk thd fclk thpw thb thfp tvd tv tvpw tvb tvfp DCLK DCLK MHz DCLK DCLK DCLK TH TH TH TH TH 5.1.4 Data Input Format Hongguang Display

Open the catalog to page 10

Shenzhen Hongguang Display Co.,Ltd 5.2 POWER ON/OFF SEQUENCE Hongguang Display

Open the catalog to page 11

Shenzhen Hongguang Display Co.,Ltd 6. ELECTRO-OPTICAL CHARACTERISTICS Item Rise Time (Tr) (Tr+Td) Decay Time (Td) Response Time Decay Time (Td) ψ=0° Viewing Angle Range 6.1 Electro-Optical Characteristics Test Method Response Time Detector Photo-detector Light Source for Reflective Type Liquid Crystal Panel Light Source for Transmission Type Hongguang Disp

Open the catalog to page 12

Shenzhen Hongguang Display Co.,Ltd 6.2 Definition of Operating Voltage, Vop Vop = (V10,ON +V90,OFF)/2 Brightness Curve for Selected Segment Driving Voltage Definition of Optical Response Time Non-selecte d Waveform Non-selected Waveform Selected Waveform Hongguang Display

Open the catalog to page 13

Shenzhen Hongguang Display Co.,Ltd 6.4 Definition of Viewing Angle θ and 12 O’clock Direction 9 O’clock Direction 3 O’clock Direction φ=90° Viewing Direction 6 O’clock Direction 6.5 Definition of Contrast ratio, CR CR = Brightness of Non-selected Segment (B2) Brightness of Selected Segment (B1) Selected Segment Brightness Curve for 100% Non-selected Segment Contrast CR,max Hongguang Display Driving Voltage

Open the catalog to page 14

Shenzhen Hongguang Display Co.,Ltd 7.INSPECTION CRITERIA 7.1 Inspection Conditions 7.11 Environmental conditions The environmental conditions for inspection shall be as follows Room temperature: 20±3°C Humidity: 65±20%RH 7.12 The external visual inspection With a single 20-watt fluorescent lamp as the light source, the inspection was in the distance of 30cm or more from the LCD to the inspector's eyes . Fluorescent lamp perpendicular to the display surface. Hongguang Display

Open the catalog to page 15

Shenzhen Hongguang Display Co.,Ltd Inspection distance and angle Inspection should be performed within angleφ(φis usually 30°) from Z axis to each X and Y. Inspection distance in any direction within φmust be kept 30±5cm from the display surface. . 7.3 Classification of defects 7.3.1Major defect A major defect refers to a defect that may substantially degrade usability for product applications. 7.3.2 Minor defect A minor defect refers to a defect which is not considered to be able substantially degrade the product application or a defect that deviates from existing standards almost...

Open the catalog to page 16

Shenzhen Hongguang Display Co.,Ltd 8.2 Tests NO. Test Item High Temperature Storage Test condition -30℃±2℃ 96H Restore 2H at 25℃ Power off High Temperature Operation 70℃±2℃ 96H Restore 2H at 25℃ Power on Low Temperature Operation -20℃±2℃ 96H Restore 2H at 25℃ Power on High Temperature & 60℃±2℃ 90%RH 96H Humidity Operation Power on Temperature Cycle --30℃←→25℃←→80℃ 30min 5min 30min after 10 cycle, Restore 2H at 25℃ Power off Vibration Test Shock Test Aftertesting,cosmeti c and electrical defects should not happen. 9 PRECAUTIONS FOR USING LCD MODULE 9.1 HANDING PRECAUTIONS (1) The display...

Open the catalog to page 17