HG080WX039-V0
19Pages

Catalog excerpts

Shenzhen Hongguang Display Co.,Ltd CUSTOMER : CUSTOMER MODULE : HG MODEL Preliminary Specification ■Final Specification Customer Confirmation column： Approved by : Please return one of the copies of the specification with your signature to us within two weeks after you receive this document.If it is not returned,we will assume that you agree to the entire contents of this specification document. Hongguang Display

Open the catalog to page 1

Shenzhen Hongguang Display Co.,Ltd Revision History Version NO. Hongguang Display FIRST ISSUE

Open the catalog to page 2

Shenzhen Hongguang Display Co.,Ltd CONTENTS GENERAL INFORMATION I/O CONNECTION & BLOCK DIAGRAM ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS ELECTRO-OPTICAL CHARACTERISTICS RELIABILITY TEST CONDITIONS INSPECTION STANDARDS PACKAGE DRAWING Hongguang Display

Open the catalog to page 3

Shenzhen Hongguang Display Co.,Ltd 1. GENERAL INFORMATION 1.1 1) Structure: TFT PANNEL+IC+FPC+BL 2) IPS Type LCD 800 dot-segment and 1280 dot-common outputs 3) 16.7M Color can be selected by software 4) White LED back light 5) MIPI interface 6) Operation Temperature : -20~60℃ 7) Storage Temperature : -20~60℃ 1.2 General specification Item of Panel Size Display mode Normally Black Pixel arrangement Active Area Recommended Viewing Direction Hongguang Display

Open the catalog to page 4

Shenzhen Hongguang Display Co.,Ltd 2.DIAGRAM FOR LCM Hongguang Display

Open the catalog to page 5

Shenzhen Hongguang Display Co.,Ltd 3. I/O CONNECTION & BLOCK DIAGRAM No. I/O connection Symbol 3.1 MIPI differential data input MIPI differential data input MIPI differential data input MIPI differential data input No Connection Ground MIPI differential clock input MIPI differential clock input MIPI differential data input MIPI differential data input MIPI differential data input MIPI differential data input Global reset pin，Active low Hongguang Display

Open the catalog to page 6

Shenzhen Hongguang Display Co.,Ltd 3.2 block diagram MCU and Display Module Interface Configuration MCU GND Power Block VCC 3.3V IOVCC(1.8V) LED_A LED_K Interface Block MIPI Interface Hongguang Display Display Module Power Interface Block

Open the catalog to page 7

Shenzhen Hongguang Display Co.,Ltd 4. ABSOLUTE MAXIMUM RATINGS (GND=AGND=0V) Parameter of absolute maximum ratings 参数 Backlight forward current Reverse Voltage Storage temperature Hongguang Display

Open the catalog to page 8

Shenzhen Hongguang Display Co.,Ltd 5. ELECTRICAL CHARACTERISTICS 5.1 Typical Operation Conditions Item Backlight Forward Voltage Note:The “LED life time” is defined as the module brightness decrease to 50% of original brightness at IL=20Ma(for each led). The LED life time could be decreased if operating ILis larger than 20mA Hongguang Display

Open the catalog to page 9

Shenzhen Hongguang Display Co.,Ltd 5.2 DC CHARACTERISTICS Notes: 1. Ta = -30 to 70 °C (to 85 °C no damage) , VCI = 2.5V to 6.6V, VDDI = 1.65V to 3.6V 2. Supply digital VDDI voltage equal or less than analog VCI voltage. 3. Source channel loading = 9KΩ,70pF/channel 4. The maximum value is between with Note 3 and Gamma setting value Hongguang Display

Open the catalog to page 10

Shenzhen Hongguang Display Co.,Ltd 5.3 AC Characteristics 5.31 High Speed Mode – Data Clock Channel Timing 5.32 High Speed Mode – Rising and Falling Timings Note: The display module has to meet timing requirements, which are defined for the transmitter (MCU) on MIPI D-Phy standard. Hongguang Display

Open the catalog to page 11

Shenzhen Hongguang Display Co.,Ltd 5.33 Reset Timing Hongguang Display

Open the catalog to page 12

Shenzhen Hongguang Display Co.,Ltd 6. ELECTRO-OPTICAL CHARACTERISTICS Parameter Symbol Condition Luminance Contrast ratio Cell Transmittance Horizontal Viewing Angle range Vertical White Chromaticity Red Reproduction of color (C light) Hongguang Display Color Gamut (C light) Response Time (Rising + Falling) Unit Remark Note 3 Base on C Light

Open the catalog to page 13

Shenzhen Hongguang Display Co.,Ltd Note1 Definition of Contrast Ratio (CR): Luminance when displaying a white raster CR = Luminance when displaying a black raster Note2: Definition of Luminance Uniformity: Active area is divided into 9 measuring areas (Shown in below), every measuring point is placed at the center of each measuring area. FPC The spot locations for luminance measurement Luminance Uniformity = Bmax: The measured maximum luminance of all measurement position. Bmin: The measured minimum luminance of all measurement position. Note 3:Definition of Response time: Sum of Tr and Tf...

Open the catalog to page 14

Shenzhen Hongguang Display Co.,Ltd Note4.Definition of Viewing Angle: The viewing angle range that the CR≥10 Note 5: Definition of Color Chromaticity (CIE 1931) Color coordinate of white & red, green, blue at center point. Hongguang Displ

Open the catalog to page 15

Shenzhen Hongguang Display Co.,Ltd 7. RELIABILITY TEST CONDITIONS No Test Item High Temperature Storage High Temperature Operating Thermal and cold shock Operate at High Temperature and Humidity Test Condition 1. Functional test is OK. Missing Segment, short, -20°C / 96Hours unclear segment, on-display, display +60°C / 96Hours abnormally and liquid -20°C / 96Hours crystal leak are un-allowed. -20°C~+60°C x 10cycles 2. No low temperature bubbles, end seal loose and (30min) (5min) (30min) fall, frame rainbow. 60°C x 90%RH / 24H Frequency: 1. Function test is OK. 10Hz~55Hz~10Hz 2. No glass...

Open the catalog to page 16

Shenzhen Hongguang Display Co.,Ltd 8. INSPECTION STANDARDS 8.1 AQL Sampling inspection standard 使用 GB/T 2828-2003 一般 II 水平,采用正常检查一次抽样方式；具体抽检方式参照《成品检验管理程序》、《抽样管理规范》缺陷区分 AQL 允收水准严重缺陷 0收1退重缺 0.4 轻缺 1.0

Open the catalog to page 17