HG080WU009
14Pages

Catalog excerpts

Shenzhen Hongguang Display Co.,Ltd CUSTOMER : CUSTOMER MODULE : HL MODEL  Preliminary Specification ■Final Specification Customer Confirmation column： Approved by : Please return one of the copies of the specification with your signature to us within two weeks after you receive this document.If it is not returned,we will assume that you agree to the entire contents of this specification document. Hongguang Display

Open the catalog to page 1

Shenzhen Hongguang Display Co.,Ltd 1. Revision Record Date Hongguang Display Revision Items

Open the catalog to page 2

Shenzhen Hongguang Display Co.,Ltd 2. General Specifications HG080WU009 is a TFT-LCD module. It is composed of a TFT-LCD panel, driver IC, FPC, a back light unit. The 8.0 display area contains 1200 x 1920 pixels and can display up to 16.7M colors. This product accords with RoHS environmental criterion. Item Display color Viewing Direction Operating temperature Storage temperature Module size Active Area(W×H) Outline Dimensions Refer to outline drawing Data Transfer Note 1: Color tune is slightly changed by temperature and driving voltage. Note 2: Without FPC and Solder. Hongguang Display

Open the catalog to page 3

Shenzhen Hongguang Display Co.,Ltd 3.Outline.Drawing Hongguang Display

Open the catalog to page 4

Shenzhen Hongguang Display Co.,Ltd 4.Pin Assignment Pin No. Symbol MIPI data negative signal MIPI data positive signal MIPI data negative signal MIPI data positive signal MIPI data negative signal MIPI data positive signal MIPI data negative signal MIPI data positive signal MIPI CLK negative signal MIPI CLK positive signal Tearing Effect Hongguang Display

Open the catalog to page 5

Shenzhen Hongguang Display Co.,Ltd 5. Absolute Maximum Ratings(Ta=25 ℃) 5.1 Electrical Absolute Maximum Ratings.(Vss=0V ,Ta=25℃) Item Power Supply Voltage Logic Signal Input Notes: 1. If the module is above these absolute maximum ratings. It may become permanently damaged. Using the module within the following electrical characteristic conditions are also exceeded, the module will malfunction and cause poor reliability. 2. VCC >VSS must be maintained. 5.2 Environmental Absolute Maximum Ratings. Ambient Temperature 1. The response time will become lower when operated at low temperature. 2....

Open the catalog to page 6

Shenzhen Hongguang Display Co.,Ltd 6.LED backlight specification(VSS=0V ,Ta=25 ℃) Item Supply voltage Supply current Forward current Normal Dimming Note: 1: VLED=VLED(+)-VLED(-). 2:The current of LED is 20mA. A LED drive in constant current mode is recommended. 3: LED power consumption is around1.26 W. 7.External system porch setting params->dsi.LANE_NUM = LCM_FOUR_LANE; params->dsi.vertical_sync_active = 1; params->dsi.vertical_backporch = 25; params->dsi.vertical_frontporch = 35; params->dsi.vertical_ active_line = FRAME_HEIGHT; params->dsi.horizontal_syc_act n ive = 1;...

Open the catalog to page 7

Shenzhen Hongguang Display Co.,Ltd 8. Power on/off Sequence In order to power on/off correnctly , please follow the following recommended power on/off sequence. Hongguang Display

Open the catalog to page 8

Shenzhen Hongguang Display Co.,Ltd 9. Optical Characteristics Item Viewing Angle NTSC Ratio Contrast Ratio Response Time Note：The parameter is slightly changed by temperature, driving voltage and materiel Note 1: The data are measured after LEDs are turned on for 5 minutes. LCM displays full white. The brightness is the average value of 9 measured spots. Measurement equipment PR-705 (Φ8mm) Measuring condition: ① Measuring surroundings: Dark room. ② Measuring temperature: Ta=25℃. ③ Adjust operating voltage to get optimum contrast at the center of the display. Measured value at the center...

Open the catalog to page 9

Shenzhen Hongguang Display Co.,Ltd Note 2: The luminance uniformity is calculated by using following formula. ⊿Bp = Bp (Min.) / Bp (Max.)×100 (%) Bp (Max.) = Maximum brightness in 9 measured spots Bp (Min.) = Minimum brightness in 9 measured spots. Active area Note 3: The definition of viewing angle: Refer to the graph below marked by θ and Ф Hongguang Display

Open the catalog to page 10

Shenzhen Hongguang Display Co.,Ltd Note 4: Definition of contrast ratio.( Test LCD using DMS501) Brightness of selected dots Brightness of non  selected dots Note 5: Definition of Response time. (Test LCD using DMS501): The output signals of photo detector are measured when the input signals are changed from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively. The response time is defined as the time interval between the 10% and 90% of amplitudes.Refer to figure as below. Hongguang Displ

Open the catalog to page 11

Shenzhen Hongguang Display Co.,Ltd The definition of response time Note 6: Definition of Color of CIE Coordinate and NTSC Ratio. Color gamut: area of RGB triangle  100% area of NTSC triangle Note 7: Definition of cross talk. Cross talk ratio(%)=|pattern A Brightness-pattern B Brightness|/pattern A Brightness*100 Measurement point(center) Electric volume value=3F+/-3Hex Hongguang Display

Open the catalog to page 12

Shenzhen Hongguang Display Co.,Ltd 10. Reliability Test Items and Criteria No Test Item Test condition High Temperature Storage High Temperature Operation High Temperature/Humidity Operation 1. After testing, cosmetic and electrical defects should not happen. 2. Total current consumption should not be more than twice of initial value. Temperature Cycle after 5 cycle, Restore 2H at 25℃ Power off Vibration Test Shock Test Not allowed cosmetic and electrical defects. Note: Operation: Supply 3.3V for logic system. The inspection terms after reliability test, as below ITEM Color Tone

Open the catalog to page 13