HG030FH006T02
16Pages

Catalog excerpts

SPECIFICATION FOR TFT LCD MODULE CUSTOMER : _ CUSTOMER MODULE :_ Customer Confirmation column: Approved by : Dept. :Data : Please return one of the copies of the specification with your signature to us within two weeks after you receive this document.If it is not returned,we will assume that you agree to the entire contents of this specification document. HongGuang Display Co.,Ltd

Open the catalog to page 1

深圳市鸿光显示有限公司 Reversion History Reversion. No First Version HongGuang Display Co.,Ltd

Open the catalog to page 2

1 Scope This Specification defines AMOLED manufactured by HongGuang Display , from here on refer as HG. In the case of any unspecified item, it may require both HG and the party designs this module into its product to work out a solution. 2 Features 2.1 Product Applications Consumer Electronics 2.2 Product Features 3) Pixel arrangement: Sub Pixel Rendering

Open the catalog to page 4

4 Mechanical Specifications Item Note: Refer to 9 Outline Dimension Drawing HongGuang Display Co.,Ltd

Open the catalog to page 5

深圳市鸿光显示有限公司 5.1.2 Power supply circuit application (This is for reference only)： Power IC recommend: ST:STAM1330, Silicon Mitus:SM3301, Richtek:RT4722 6 Electro-Optical Specification Item CIE Chro mati city Viewing angle Color Gamut Brightness Uniformity Contrast Ratio 4% black or white window, 117 gray scale V(Gray)=48,72,104,132, Response time HongGuang Display Co.,Ltd

Open the catalog to page 6

Notel: Temp.25°C, (Angle> distance) Environmental conditions: Temp.25°C±3°C, 65±20%RH, Dark Room» Distance of OLED display center to measuring machine is 50cm 0 Note2: Brightness, Brightness Uniformity and Contrast Ratio definition Measure 5 points of Display Brightness. P1~P5. 1) Brightness definition Luminance = [ P1 + P2 + P3 + P4 + P5 ] / 5 2) Brightness Uniformity definition Brightness Uniformity = Y(min) / Y(max) 3) Contrast Ratio definition Dark Room C.R= Luminance (White) / Luminance (Black) Note3: Cross-talk 4% black or white window , 117 gray background.

Open the catalog to page 7

For white windows AWl (i = 5 to 8), and CT = |Lwi-DK~Li1ftr-DFFl x 100%(i = 5 to 8) "WjDFF For black windows ABl (i = 5 to 8). CT = ILbl-0W ~Lb_offI x 100%( i = 5 to 8) ^EOFF The maximum cross-talk value shall be noted in the measurement report. Note4: Response Time Response time=Pixel turn on and turn off time (White<=>Black). It is measuring transition time from 10% to 90% of luminance. 7 I/O Connection and Block Diagrams HongGuang Display Co.,Ltd

Open the catalog to page 8

7.2Display Module Block Diagram HongGuang Display Co.,Ltd HG030FH006T02 9

Open the catalog to page 9

HongGuang Display Co.,Ltd

Open the catalog to page 10

深圳市鸿光显示有限公司 8.1 AC Characteristics（MIPI） 8.1.1 HS Data Transmission Burst HongGuang Display Co.,Ltd

Open the catalog to page 11

8.1.5 Timing requirements for RESETB When RESETB of the reset pin equals to Low, it will be in the condition of reset. When it is in the condition of reset, it will make the device recover the initial set. However, in order to avoid the reset noise cause reset, there is a mechanism to judge about whether the reset is needed or not. The closed interval of Low can be shown as the following. Shorter than fcesw RES Internal Status No™ Operation Resetting nrtia Condrlion Figure: Reset timing Table: Reset timing HongGuang Display Co.,Ltd HG030FH006T02 13 / 16

Open the catalog to page 13

深圳市鸿光显示有限公司 9 Reliability 9.1 Environmental Test No High Temperature Operation High Temperature non-Operation Contact discharge HongGuang Display

Open the catalog to page 14

HongGuang Display Co.,Ltd

Open the catalog to page 15

深圳市鸿光显示有限公司 11 Handing Precautions 11.2 When cleaning ITO pad, avoid using hard and abrasive material or corrosive solution. 11.3 Keep module away from direct sunlight or fluorescent light, and keep it at room temperature and humidity. 11.4 Strong impact & pressure on module and packing is prohibited. 11.5 Following normal power on/off sequence is necessary for preventing abnormal display or permanent damage to display. 11.6 Optimal contrast ratio under ideal voltage is AMOLED module’s characteristic, hence it is recommended a voltage control function available. 11.7 Image sticking may...

Open the catalog to page 16