G6000
G6000
The G6000 series includes various models with lamp power ranging from 3KW to 50KW. Each model specifies input voltage, input current, output voltage range, maximum output current, and recommended lamp voltage. For example, model 2T0403 has a lamp power of 3KW, input voltage of 220V, and an output voltage range of 250-450V.
The input nominal voltage for the 4T series is 380V and for the 2S/2T series is 220V, both at 50/60Hz. The voltage range is -10% to +15%. The output voltage for the 4T series ranges from 450V to 3550V, while the 2S series ranges from 220V to 650V. The control method is power vector control with a power setting resolution of 0.1KW. RS485 communication interface is available for device control and status reading.
Dimensions vary by power level, with mounting hole sizes and installation methods specified. For example, models with power from 3-6KW have dimensions of 465x485x180mm and are wall-mounted. Models over 22KW are packed with poly wooden cases for protection.
Installation space requirements depend on power level, with specific clearances needed for heat dissipation. For instance, models from 3.0KW to 15KW require a clearance of A≥20mm and B≥100mm. Heat dissipates from bottom to top, and side-by-side horizontal installation is recommended for multiple units.
An optional external LCD keyboard is available, with mounting plate opening size specified as 127x67mm.
Catalog excerpts
Website: www.garleuv.com Email: [email protected] G6000 SERIES DATA SHEET Output voltage range（V） Lamp voltage recommended （V）
Open the catalog to page 1
Website: www.garleuv.com Email: [email protected] Output voltage range（V） Lamp voltage recommended （V） Note: If input voltage is 480V, output voltage will be increased 20%. 2. Basic Specification Nominal voltage, frequency Input Voltage range
Open the catalog to page 2
Website: www.garleuv.com Email: [email protected] Standard：0~10V voltage input(AI) or 0~20mA current input(AI) Output voltage Output frequency Digital output DO Standard configuration 3 channel digital output DO1/DO2/DO3 2 channel 0~10V/0~20mA voltage output signal Relay contact output Power vector control Control method Power setting resolution Control characteristics 110% of the rated current of the lamp Voltage limit 110% of the rated voltage of the lamp Standby function Lamp timer function Running function Alarm content Ambient temperature Ambient humidity Surrounding environment Altitude...
Open the catalog to page 3
Website: www.garleuv.com Email: [email protected] Install method Wall mounted Carton/ Poly wooden case size(mm) Note: all models > 22KW will be packed with poly wooden case to provide appropriate protection. 4. UV power supply control loop wiring diagram
Open the catalog to page 4
Website: www.garleuv.com Email: [email protected] 5. Installation requirements The installation space of UV electronic power supply requires as below: Power level
Open the catalog to page 5
Website: www.garleuv.com Email: [email protected] The heat of EPS dissipates from the bottom part to the top. For more than 1 pcs EPS installation, Please have them installed side by side horizontally. Considering the heat dissipation performance, a mental plate is required to be installed as below If vertically installation is unavoidable: 6. Operation panel (optional)
Open the catalog to page 6
Website: www.garleuv.com Email: [email protected] 安装板开孔尺寸： mm Mounting plate opening size：127*67mm External LCD keyboard Shuttle keyboard Dimension
Open the catalog to page 7
