User Manual of SY series ozone generator
2Pages

6. Equipment maintenance, please send warranty card to the company together with the machines, we will not undertake the maintenance costs if it is inconsistent with the above operation instructions. 7. The equipment maintenance, if need door-to-door service, the travel expenses should be paid by the customers, we will see the distance to choose the nearest distributor to do door-door service. Ozone technology · leader 7. Precautions 1.Do not use in places with strong static electricity and strong magnetic field. Do not touch water or liquid. 2.Due to the strong oxidation of O3, the time for washing rubber products, hardware and plastic products should not be too long. 3.O3 has a special smell,it will produce such odor when the machine is working, which is normal. 4.When O3 is sterilized and removed, the eyes and respiratory tract should not be directly close to the O3 outlet to avoid discomfort. 5.This product belongs to high-pressure product, which should be placed in a safe and ventilated safe place. 6.It must be grounded to prevent lightning strikes before use. When not in use,it must be put down and gently pulled out of the power supply. 7.Do not use foreign matters to block the airflow orifice or insert metal to avoid electric shock and reduce product performance. 8.Children under the age of 10 and mentally ill persons using the machine are prohibited. 9.Non-professional electrician shall not dismantle the machine for maintenance or change the mechanical or electronic properties of the product. 10.The power connector must comply with the national wiring regulations, and the power cord should be connected to the external grounding cord. 11.If the power cord is damaged, it must be replaced by qualified technicians or technicians recognized by the company. 8. Troubles and Troubleshooting Cause 1. Whether to set working hours 2. Whether the power plug is loose 3. Whether the power input is normal 4. Is the fuse damaged 1. Set working hours 2. Connect the power 3. Access to 220V/50Hz power supply 4. Replace the same type of fuse No ozone output or low concentration 1. Whether the internal wiring falls off 2. Whether the ozone generating device has purple light 3. Whether the power indicator is on or not 4. Ozone generator aging 1. Power off, open the case and check the line 2. Reboot 3. If it is burnt out, please replace the high-voltage power supply 4. Replace ozone generator The casing is electrically charged 1. The power supply is not grounded 2. There is water inside and outside the case 1. Check and repair the circuit 2. Clean up the water Open the ozone disinfection machine cause the fuse is burnt 1. The short circuit 2. Power failure 3. The inside of the machine is too wet 1. Check and repair the circuit 2. Repair the power supply 3. Remove moisture and air dry OZONE DISINFECTION High voltage hazard please power off operation OZONE MACHINE INSTRUCTIONS Air disinfector ’s series

1. Basic product information 1. Name： 3.Annex list ers 1. Control panel instruction manual Warranty card Ozone disinfection machine 2. Main bactericidal factors and strength： a.The main bactericidal factor of this product is ozone（O3)； b.In the closed and unmanned space, after 30 minutes of starting up, the Product model 3. Sterilization principle： Using the oxidation of ozone（O3)oxygen atom to destroy the structure of Power switch Reduce microbial membrane, in order to achieve bactericidal effect. 4. Killing microorganism category： disinfection (2002 version), and it is qualified for...