*mydirectindustry

single-pole switch SLM13

Product catalog summary

Product Introduction: The SLM13 Series Safety Door Switch is a widely used door interlock technology that utilizes an inserting key to detect the movement of protective doors. It is known for its small size, lightweight, and cost-effectiveness. The switch offers various contact configurations and locking functions, making it suitable for a wide range of applications. It features a rotated head supporting seven different key inserting positions and options for power to lock or release, enhancing its flexibility for different working and installation methods.

Specifications: The SLM13 Series has a holding force of 1300N and an IP67 protection rate. It supports both general and micro-loads and is made from PA66 fire retardant material. It complies with standards such as EN 60947-5-1, IEC 60947-5-1, GB/T 14048.5, EN ISO 14119, and GB/T 18831.

Technical Parameters: The switch operates at a rated voltage of DC24V with a power consumption of 4.8W and an approximate current of 200mA. It is designed for an operating temperature range of -10℃ to +55℃ and humidity below 95% RH. The mechanical lifespan exceeds 1,000,000 operations, and the electrical lifespan is over 150,000 operations at AC240V3A resistive load.

Model Selection: The SLM13 Series offers various models with different contact types and configurations, such as 1NC/1NO, 2NC, and combinations thereof. Models are available with options for power to lock or release and different head directions and materials.

Installation: The installation process involves fixing the base of the slide unit with M6*16 screws, securing the keys with M5*10 screws, and fixing the switch with M4*35 screws. The operation key should be installed within a range of 1-3.5mm, allowing a ±1mm deviation within the key insertion center of the hole.

Catalog excerpts

Safetyprotection forcedlock SLM series is the most common door interlock technology. It use a inserting key to detect the movement of the protective door. As the small and light weight size, various contact configurations, and locking functions, safety door locks are usually the lowest cost solution. In addition, the flexible keys improves its misalignment tolerance, make it a wide range of applications. Rotated head (support 7 different key inserting position), power to lock/ power to release ensure various option on working method and installation method. It improve the flexibility of the switch and make it suitable for use on various doors. • Multiple and optional contacts constructure. • PA66 fire retardant material.• Support general load and micro-load. ESPE I www.espetech.com 14

Open the catalog to page 1

Switch contact (Door monitor + lock monitor) Head direction/ Material Door lock/ release method (Default front side installation)/ plastic M: DC24V power to release (mechanical lock) waterproof connector

Open the catalog to page 3

Lock/ Release method Contact type (door monitor + lock monitor)

Open the catalog to page 4

Lock/ Release method Front release Contact type (door monitor + lock monitor)

Open the catalog to page 5

Contact(doorminitor+ lockmonitor) doormonitor NC ESPE www.espetech.com Operationkey completeinsertion Operationkey extraction

Open the catalog to page 6

ESPE www.espetech.co

Open the catalog to page 7

★ Loosen 4 screw on top of head, rotate the head to the right key inserting position and then install it. ★ When install on slide hung door, it should be over than semidiameter. Please install the safety switch and insertion key under range 1-3.5mm. ±lmm ±lmm The installation of operation key allows ±1mm deviation within the key insertion center of the hole.

Open the catalog to page 8

single-pole switch SLM13

single-pole switch SLM13

Catalog excerpts

All Shenzhen ESPE technology Co., LTD catalogs and technical brochures