*mydirectindustry

Catalogs
Shenzhen ESPE technology Co., LTD
safety switch SLM11-3 series

safety switch SLM11-3 series

Product catalog summary

Product Overview: The SLM11 Series Safety Door Switch is designed for easy installation in narrow spaces, enhancing usability. It features a rotatable head that supports various key insertions, ensuring flexible installation and reducing time spent on installation and wiring. This design is suitable for environments with low safety performance requirements, such as injection molding machines.

Specifications:

Holding Force: 1300N
Protection Rate: IP67
Operating Voltage: DC24V
Power: 4.8W
Rated Current: Approx. 200mA
Operating Temperature: -10℃ to +55℃
Operating Humidity: <95%RH
Mechanical Lifespan: Over 1,000,000 times
Electrical Lifespan: Over 150,000 cycles (AC240V 3A, resistive load)

Certifications and Standards: The product complies with EN60947-5-1, IEC60947-5-1, GB/T 14048.5, EN ISO 14119, and GB/T 18831 standards. It is certified by TÜV Rheinland.

Technical Features:

Material: PA66 fire retardant
Anti-electric Shock Level: Class II (Dual Insulation)
Pulse Withstand Voltage: 2.5KV
Insulation Resistance: 100MΩ above
Short-circuit Protection: Requires a quick-break fuse (10A, 250V)
Vibration Resistance: 10-55Hz double amplitude 1.5mm

Model Selection: The SLM11 series offers various models with different contact configurations (1NO+1NC, 1NC+1NC) and materials (plastic or metal). The models are designed for different installation directions and locking mechanisms (power to release or power to lock).

Installation Guidelines: The safety switch should be installed with the operation key within a range of 1-3.5mm and allows a ±1mm deviation within the key insertion center. For slide-hung doors, installation should exceed the semi-diameter.

Catalog excerpts

Safetyprotection forcedlock The 2 contacts safety door switch can be easily installed in narrow space, greatly improve the ease of use. Rotated head support various insertion of operating key and ensure flexible installation to save time spend on installation and wiring. This design is suitable for site with low safety performance index requirements such as injection molding machines. ■ Multiple rotated direction. • Support general load and micro-load.

Open the catalog to page 1

Switch contact Product series (Door monitor + lock monitor) Head direction/ Material Door lock/ release method Connector door monitor lock monitor NC IINC I NO I I I NO I

Open the catalog to page 3

Product installation ★ Loosen 4 screw on top of head, rotate the head to the right key inserting position and then install it. ★ When install on slide hung door, it should be over than semidiameter. Door hinge ★ Please install the safety switch and insertion key under range 1-3.5mm. The installation of operation key allows ±1mm deviation within the key insertion center of the hole.

Open the catalog to page 4

safety switch SLM11-3 series

safety switch SLM11-3 series

Catalog excerpts

All Shenzhen ESPE technology Co., LTD catalogs and technical brochures