Safetyprotection forcedlock AC€0 Product introduction SLM11 series safety door switch is equipped with multiple contacts, with electromagnetic locking or mechanical locking option, rotation head and various key type to ensure flexible installation. 1300N strong holding force and IP67 protection sturcture ensure its widely application range. • Multiple and optional contacts. • Rotated head & various keys. • Support general load and micro-load.

Switch contact (Door monitor + lock monitor) Head direction/ Material Door lock/ release method B: 1NC/1NO(Slow action)+2NC(Slow action) D:2NC(Slow action) +1NC(Slow action) 1 E:2NO(Slow action) + 2NC (Slow action) j F:lNC/1NO(Slow action)+1NC(Slow action) G:2NC(Slow action)+2NC (Slow action) H :lNC/1NO(Slow action)+1NC/1NO(Slow action) l:lNO(Slow action)+3NC(Slow action) (Default front side installation)/ plastic (Default front side installation)/ metal M: DC24V power to release (mechanical lock) | No mark: front ! B: Rear to release

Lock/ Release method Contact type (door monitor + lock monitor)

Lock/ Release method Front release Contact type (door monitor + lock monitor)

Contactsaction Model Contact (doorminitor+ lock monitor) Wire diagram door monitor lock monitor complete insertion Travel extraction Lock position Lock position Lock position

★ Loosen 4 screw on top of head, rotate the head to the right key inserting position and then install it. ★ When install on slide hung door, it should be over than semidiameter. Please install the safety switch and insertion key under range 1-3.5mm. ±lmm ±lmm ^ The installation of operation key allows ±1mm deviation within the key insertion center of the hole.

Back handle Rear release unit Model :SU-50 (Sold separately) Model :SH-1 (Sold separately) Installation of back unlock device A Precautions for rearrelease button 1. The release button is a safety measure for emergency evacuation when operator is accidentally trapped in the safety fence (hazard area). 2. Rotate the metal knob 90° anticlockwise to release safety door switch and open the door. 3. After removed danger, please rotate the metal knob 90° clockwise to restore the locked state. The door cannot be locked even if the door is closed when the release knob is in the unlocked position. 4....